Perkasie Fence Company

Do I need a permit to build a new fence in Perkasie Borough?
Yes. The Building & Zoning Department requires a zoning permit for any new fence installation, and work cannot start until the permit is issued.

Is a permit required if I replace or substantially repair an old fence?
Yes. A zoning permit is still needed for “repairs” or “replacements” that change the fence’s height, length, posts, or materials.

What about simple maintenance such as painting or tightening a loose picket?
Routine maintenance that doesn’t alter the fence’s height, footprint, or construction is treated as normal upkeep and generally doesn’t require a permit. When in doubt, contact the Zoning Officer at 215-257-5065 or permits@perkasieborough.org.

Which form do I file, and what must it include?
Submit the Borough’s Zoning Permit Application with a scaled plot plan showing the exact fence line and its distances to all property lines and structures.

Are there special placement rules for street corners or easements?
Yes. Section 186-28 establishes a 25-foot “sight triangle” on every corner lot; anything between 2 ft and 7 ft high must stay out of that triangle. A variance is required if you can’t meet the clearance.

Where do I submit the permit and how long does approval take?
Deliver the completed application (and fee) in person to Building & Zoning at 620 W. Chestnut St. or email the PDF. Reviews typically take less than two weeks, but starting work before approval can trigger stop-work orders and double fees.

How tall can my fence be in Perkasie?
The borough-wide maximum height is 7 ft in any front, side, or rear yard (measured from natural grade). Anything taller needs a variance from the Zoning Hearing Board.

Does Perkasie restrict the type of fence materials or styles?

• Allowed: Standard residential materials—wood, vinyl/PVC, ornamental aluminum or steel, wrought iron, chain-link, masonry—are usually approved if they meet height and setback rules.

• Prohibited or conditional: Barbed-wire, razor-wire, and electrified fences are generally disallowed except in legitimate agricultural or industrial settings.

• Finish-side rule: The finished (good-looking) side must face neighboring property or the street; note this on your plot plan.

Sources:

https://perkasieborough.org/departments/building-zoning/forms-permits/

https://perkasieborough.org/media/1811/zoning-permit-application.pdf

https://perkasieborough.org/departments/building-zoning/property-maintenance/

https://ecode360.com/10782918

https://ecode360.com/10782252 

Thinking about a new fence or freshening up an old one in Perkasie? Here’s a friendly breakdown of what you might spend when you hire a licensed, bonded, insured local pro:

• Wood Fences run about $25 – $40 per linear foot. For a typical 120–150 ft yard, you’re looking at $3,000 – $6,000. Want cedar or redwood? Budget closer to $35 – $50 per foot.

• Vinyl Fences usually cost $30 – $50 per linear foot. Most standard yards come in around $4,500 – $7,500. Vinyl holds up to rain, never needs painting, and is super low-maintenance.

• Chain-Link Fences are the budget pick at $15 – $25 per linear foot. A full install often runs $2,000 – $3,500, perfect for pet runs or simple boundary marking.

• Aluminum & Steel Fences start around $40 – $60 per linear foot. Expect to pay $6,000 – $9,000 for an ornamental or security-grade setup.

• Repairs for small fixes—replacing boards, pickets, or loose panels—run $150 – $400. Swapping out posts or rails is $75 – $150 each, and a full panel replacement often lands between $200 – $450.

Costs can shift based on your material choice, fence style, yard terrain, and extras like gate hardware, post caps, or integrated lighting.

Ready to get started? We offer free, no-obligation estimates and honest advice to help make your Perkasie property look its best and stay secure. Give us a call today!