Make sure that known good batteries are inserted and that Eve Thermo is switched on. On the side of the device, under the battery compartment, there is a reset button. Use a paper clip or similar object to press the reset button until the digits 66/99 flash.
In case of a real alarm, Eve Water Guard will alert you immediately with its 100 dB siren and red flashing warning light. After one minute, the alarm sound will automatically pause and resume every two minutes for 10 seconds. If configured in the Apple Home App, you will also receive a notification.
If you plan to add one of the RAID adapters that includes a RAID flash power module (supercap) as a field upgrade, then you may also need to order a Supercap installation kit for the supercap, depending on the location where the supercap will be installed. For CTO orders, the components needed are automatically derived when you select the RAID adapter.
The RAID 930-8e and RAID 940-8e use a flash power module (supercap), which can be installed in one of up to four locations in the server depending on the server configuration. See the RAID flash power module (supercap) support section for details. The number of 930/940-8e RAID adapters supported is based on how many supercaps can be installed in the server. If an internal RAID adapter with flash power modules is installed, the maximum number of 930/940-8e adapters supported is reduced by 1.
 3ae0bdd00e