We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-06 · 6 min read · Independent comparison
If you want to restore worn-out Beats Studio 2.0 or Studio 3.0 earpads with fresh memory foam and soft leather, choose Niukeke Replacement Ear Pads; if you need to protect the pads you already own from sweat and grime — especially for motorcycle riding, the gym, or long commutes — choose Adhiper Thickened Sweat Ear.
• Niukeke's biggest strength: it's a full replacement pad — high-density memory foam plus soft leather — so it renews the cushion itself and its sealing, not just the surface.
• Niukeke's biggest trade-off: it only fits Beats Studio 2.0 and Studio 3.0, and it's red, so it's a color statement rather than a stealth match.
• Adhiper's biggest strength: thickened silicone covers that slip over your existing pads to block sweat, moisture, oils, and dust, and they wipe or rinse clean.
• Adhiper's biggest trade-off: it's a protector, not a replacement — if your foam is already collapsed or flaking, a cover won't rebuild it.
• Choose Niukeke if your pads are worn out or uncomfortable and you want to bring the headphone back to a like-new fit.
• Choose Adhiper if your pads are still good and you want to keep them that way through sweat-heavy use.
Niukeke sells a direct fix for one specific problem: collapsed, cracked, or uncomfortable earpads on Beats Studio 2.0 and Studio 3.0 headphones. The pads use high-density memory foam that's described as slowly rebounding, wrapped in soft leather with tight stitching. That combination is what makes a replacement pad worth doing at all — the foam compresses against your head instead of flattening out, and the stitching is what keeps the cushion from splitting at the seam after months of use.
The other half of the story is sealing. Once a pad loses its shape, sound leaks out and outside noise leaks in, which is exactly what hurts an active noise cancelling headphone. Niukeke leans into this: the pads are built for good sealability so they can shut out ambient noise and let you hear more of the music. If you've been wondering why your Studio 3.0 suddenly sounds thin, the pad is usually the culprit, and this is the part that addresses it.
Installation is pitched as a few-minute job — you work the new cushion around the mounting ring and you're done. Niukeke also backs the purchase with an after-sales service commitment, which matters for a part that's easy to order in the wrong model.
Adhiper Thickened Sweat Ear: Who It's For
Adhiper takes the opposite approach. Instead of replacing your pads, it slides a thickened silicone cover over them — compatible with Beats Studio Pro, Studio 3, and Studio 2. The point is defense: the cover is meant to shield the pad underneath from sweat, moisture, skin oils, dust, and general daily wear. If you've ever watched a leather pad go shiny, then sticky, then flaky, you know exactly what it's fighting.
The material is the selling point. Adhiper describes it as upgraded thickened silicone that's softer, more durable, and more stretch-resistant than ordinary covers. Practically, that means the cover holds its shape when you pull it on and off, and it stays put while you're wearing it — the anti-slip construction keeps it from creeping around the pad during a session.
The use cases are laid out clearly: gym workouts, running, fitness training, gaming, commuting, travel, office work, and long listening sessions. That's a broad net, but the logic is consistent — anywhere moisture builds up between your ear and the pad, a washable silicone layer makes sense. Maintenance is simple: wipe it down or rinse it, and it's ready to go again.
Adhiper also covers it with a one-year warranty on parts and offers customer support for installation and compatibility questions.
Who should skip it: anyone whose pads are already dead. A cover protects foam; it doesn't restore it. If your cushion is flat or the surface is peeling, fix the pad first and then protect the new one. Also note the fit is Studio Pro, Studio 3, and Studio 2 — not other Beats models.
Side-by-Side: Which Should You Choose?
• Worn-out or uncomfortable pads → Niukeke Replacement Ear Pads. It replaces the foam and leather rather than covering them.
• Pads still in good shape → Adhiper Thickened Sweat Ear. It preserves what you already have instead of replacing it.
• Restoring noise isolation and sound seal → Niukeke. The replacement pad is the part that actually seals against your head.
• Long listening sessions with clean, low-maintenance upkeep → Adhiper. Wipe or rinse and it's done.
• Widest headphone compatibility across the Beats Studio line → Adhiper. It lists Studio Pro, Studio 3, and Studio 2.
• A specific fit for Studio 2.0 and Studio 3.0 only → Niukeke. It's purpose-built for those two models.
• Fast, tool-free installation → both. Niukeke installs in minutes; Adhiper just slips over the existing pad.
If I were buying for myself, I'd match the product to the state of my headphones — and for a motorcycle rider, I'd honestly consider both. Start with Niukeke Replacement Ear Pads if your Studio 2.0 or Studio 3.0 cushions are shot: the memory foam and leather are the actual fix, and they bring back the seal that makes noise cancelling work. Then, once the pads are fresh, add Adhiper Thickened Sweat Ear to keep sweat and road grime off them. If your pads are still healthy and your only worry is moisture, skip straight to Adhiper. That's the combination I'd run.
Connection depends on the model. Niukeke Replacement Ear Pads are for Beats Studio 2.0 and Studio 3.0, which are wireless headphones — they pair over Bluetooth like any other Bluetooth headphone. Adhiper's covers fit Beats Studio Pro, Studio 3, and Studio 2, which are also wireless. Either way, the pads and covers don't change how the headphone connects; they only change the cushion.
How to test studio headphones?
A practical check is the seal. Put the headphones on, play something with steady low-end, and press the pads gently against your ears — if the bass and isolation change noticeably, the seal is weak and the pads are likely worn. That's the signal to replace them with Niukeke, or to protect good pads with Adhiper before they get to that point.
Power the headphones on and put them in pairing mode, then select them from your phone's or player's Bluetooth list. This is a function of the headphone itself — neither the Niukeke replacement pads nor the Adhiper silicone covers affect Bluetooth pairing, so you can install either one and connect exactly as before.
Same process: turn the headphones on, hold the pairing control until the indicator starts flashing, then choose the Beats entry in your device's Bluetooth settings. Both products here are accessories for Beats Studio models — Niukeke replaces the pads on Studio 2.0 and 3.0, Adhiper covers the pads on Studio Pro, Studio 3, and Studio 2 — so pairing stays the same after fitting them.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Yunsailing 30 vs Momfree 2-in-1: Adjustable Headband, Steinberg Recording Pack vs Sennheiser HD 300, Sonitum Headset vs MAIRDI USB Headset, Baseus Bowie MC1 vs Ugreen ClipBuds Open-Ear