How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wired, plug-and-play set of in-ear earbuds that works with nearly every 3.5mm device you own for TV watching, choose Nimizo iPhone Earbuds/Headphones/Earphones; if you need a clip-on, hair-friendly design that leaves your ear canal open so you can still hear the room, choose GEEKRIA Clip.
• Nimizo biggest strength: MFi certification plus wide iOS/Android/PC/iPad compatibility, a built-in remote with volume and call control, and dynamic drivers covering 20 Hz–20,000 Hz.
• Nimizo biggest trade-off: It's a traditional in-ear design, so it blocks your ear canal and doesn't let in ambient sound the way a clip-on does.
• GEEKRIA Clip biggest strength: Soft sponge-covered earpads that sit outside the ear canal, a lightweight clip-on fit, and a storage case with a 3.94 ft tangle-resistant cable.
• GEEKRIA Clip biggest trade-off: No noise control at all, and GEEKRIA notes it's mainly for mobile phones — on a computer you'd need an adapter cable.
• Pick Nimizo if you want one wired set that jumps between iPhone, iPad, Android, PC and MP3 players with inline volume control.
• Pick GEEKRIA Clip if you dislike things inside your ears, want to stay aware of your surroundings, and mostly plug into a phone, tablet or handheld.
Nimizo's pitch is breadth. The 3.5mm jack and the listed compatibility sweep across iPhone 6s Plus, 6s, 6 Plus, 6, 5s, 5c, 5 and SE, iPad Pro, iPad Air and Air 2, iPad mini, mini 2 and mini 4, iPad 4, iPod Touch 5, iPod nano 7, tablets, PCs and most Android devices. In practice that means one cheap-feeling-to-lose pair that lives in your bag and works wherever you land. For TV watching on a laptop or an older tablet with a headphone jack, that's genuinely useful — you plug in, and you're done.
The feature set is straightforward and inline. There's a remote on the cord for volume, playback and answering or ending calls, plus a built-in microphone. The speakers use dynamic drivers rated 20 Hz–20,000 Hz, and the listing emphasizes maximized output and bass. That frequency range is the standard full-range figure, so expect normal consumer earbud sound rather than anything audiophile. The housing is plastic in white, the fit is in-ear, the weight is listed at 0.01 kg, and the design is described as ultralight with soft, smooth cables.
GEEKRIA Clip: Who It's For
GEEKRIA takes the opposite approach. These are wired clip-on, hook-on ear headphones: the earpiece is a circle that rests on the ear rather than inside it, with soft sponge-covered earpads for breathability and long wear without the fatigue that comes from stuffing tips into your canal. If traditional earbuds always feel like they're slowly working their way out — or you simply find them uncomfortable — this is the whole point of the product.
The build is PVC in black, and the whole thing weighs 29 g, so it's light enough to forget about. The cable runs 3.94 ft (120 cm), and GEEKRIA includes a storage case, which is a small but real quality-of-life detail for pocket or bag carry. Controls cover calls, and it works with 3.5mm audio jack devices: smartphones, tablets, game consoles and music players. One caveat straight from the listing: it's designed mainly for mobile phones, and if you want to use it on a computer you'll need a one-to-two adapter cable. There's also no noise control, which is by design — the open fit lets ambient sound in, so you stay aware of what's happening around you.
Who should buy it: people who dislike in-ear buds, wear glasses or hats, or want one ear free to hear the room — say, watching TV while keeping an ear out for family or a doorbell. It's also a reasonable fit for handheld gaming on a console or phone. Who should skip it: anyone who wants bass isolation, noise reduction, or a cable long enough to stretch across a living room to a far-away TV. And if your main source is a desktop PC, remember that adapter requirement before you commit.
• Best for TV watching on a laptop, tablet or older phone with a headphone jack → Nimizo, because of its broad device compatibility and inline volume control.
• Best for staying aware of your surroundings → GEEKRIA Clip, since the open on-ear design lets ambient sound in and has no noise control by design.
• Best for comfort over long sessions if you dislike in-ear tips → GEEKRIA Clip, with sponge-covered earpads that never enter the ear canal.
• Best for sound isolation and a fuller-range driver spec → Nimizo, with dynamic drivers rated 20 Hz–20,000 Hz and an in-ear seal.
• Best for portability and tangle management → GEEKRIA Clip, thanks to its 29 g weight and included storage case.
• Best for mixed iOS/Android/PC households → Nimizo, given its MFi certification and the long list of compatible Apple and Android devices.
• Best for gaming on a console or handheld → GEEKRIA Clip, which lists game consoles among compatible 3.5mm devices.
• Best for a desktop PC setup → Nimizo, which doesn't carry the "adapter cable required on computer" caveat that GEEKRIA notes.
If I were buying for TV watching, I'd go with Nimizo iPhone Earbuds/Headphones/Earphones. In my opinion, the combination of a single 3.5mm jack that works across iPhone, iPad, Android, PC and MP3 players, plus inline volume and call controls, makes it the more flexible everyday pick — especially for late-night viewing where you want the sound contained in your ears. I'd choose GEEKRIA Clip instead only if you specifically want the open, clip-on feel and value hearing the room around you. Both are wired, so neither gives you the freedom of multipoint Bluetooth; if you're comparing them, it's about fit and device reach, not wireless convenience. For jack-equipped gear, Nimizo is the more broadly useful tool in my view.
These are both wired 3.5mm sets, so there's no pairing to undo — disconnecting means unplugging the jack. On a phone that uses a Lightning or USB-C port, you'd also remove any adapter you're using, then forget the adapter in your Bluetooth settings if it registered as a device.
How to make headphones forget all devices?
Again, unpairing is a Bluetooth-only action, and neither product here uses Bluetooth. Both connect through a 3.5mm jack, so the "unpair" equivalent is pulling the plug. Any pairing you need to undo belongs to a separate wireless device, not to these.
Neither Nimizo nor GEEKRIA Clip supports simultaneous multi-device audio — they're single-jack analog headphones, so one source at a time. For two devices at once you'd need true multipoint Bluetooth earbuds or a mixer/splitter setup.
Not directly. GEEKRIA notes it's meant mainly for mobile phones and that a computer requires a one-to-two adapter cable. Nimizo, by contrast, lists PC among its compatible devices and doesn't carry that adapter caveat.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SIVGA SV021 vs Amazon Renewed Beats Studio Pro, APETOO USB Earbuds vs SIMOLIO USB-C-Headphones Wired-Kids for-School, Raycon Pro Earbuds vs YOUWEIQU AI Real-Time Translation, Coby Noise Cancelling Sleep vs BUGANI Sleep Earbuds