期刊論文 (Journal)

1. Ai-Huei Chiou＊, Hao-Yu Liao, Jun-Luo Wei, Effects of TiO2 thin films on silicon nanowire arrays in heterojunction solar cells, Surface and Coatings Technology Volume 476, 30 January 2024, 130248, (1-30). (SCI IF=5.62, Q1) 

2. Ai-Huei Chiou＊, Chia-Hua Lin Material and mechanical characterization of recycled polypropylene reinforced with different weight percentages of short glass fiber developed by injection molding,Heliyon , Volume 9, Issue 9, September 2023, e19403, (9). (SCI IF=3.6, Q1 ) 

3. Ai-Huei Chiou＊, C. W. Chang & C. J. Ting, Spectrally selective antireflection of nanoimprint lithography-formed 3D spherical structures on film coated with a silver layer, Scientific Reports (2022) 12:19505, 1-12. (SCI IF=4.379, Q1) 

4. Tsai, Y. L., Chang, H. C., Lin, S. N., Chiou, A. H*., & Lee, T. L. "Using Convolutional Neural Networks in the Development of a Water Pipe Leakage and Location Identification System." Applied Sciences 12.16 (2022): 8034. (SCI IF= 2.838, Q2) 

5. Ai-Huei Chiou＊; Jun- Luo Wei; Ssu-Han Chen, Ag-Functionalized Si Nanowire Arrays Aligned Vertically for SERS Detection of Capture Heavy Metal Ions by BSA , coatings (2021) 11(6), 685.. (SCI IF= 2.881, Q2) 

6. Shinn-Dar Wu, Ai-Huei Chiou＊, The study on a new method of preparing PMMA forming composite bipolar plate, Scientific Reports (2021) 11(1), 1-12. (SCI IF=4.379, Q1) 

7. Ying-Yuan Chen, Guo-Wei Chen, Ai-Huei Chiou, Ssu-Han Chen, Forecasting nonlinear time series using an adaptive nonlinear grey Bernoulli model: Cases of energy consumption, Journal of Grey System (2017). (SCI IF=0.500, Q4)

8. Ai-Huei Chiou, Shinn-Dar Wu, Ruey-Chang Hsiao, Chun-Yao Hsu, “TiO2–silicon nanowire arrays for heterojunction diode applications” , THIN SOLID FILMS. 616 (2016): 116-121. (SCI IF=1.879,Q2)

9. Chien-Chih Wang, Ai-Huei Chiou, Ssu-Han Chen, “Detecting defects on LED integrated substrate using non-negative matrix factorization”, Frontiers of Information Technology & Electronic Engineering, 2016. (SCI IF=0.622, Q4)

10. C. C. Hu, A. H. Chiou, C. T. Yang, W. J. Yang, J. Y. Kao*, C. Y. Hsu*,“ Best compromise for Photocatalytic activity and hydrophilicity: N-doped TiO2 films under UV light“, Journal of Sol-Gel Science and Technology, ISSN: 0928-0707 (Print), 1573-4846 (Online). (SCI IF=1.532, Q2)

11. P.C. Huang, C.C. Sung, A.H. Chiou, J. Y. Kao, C.Y. Hsu, “Preparation and characterization of TiO2photocatalyst thin films using radio frequency sputtering” , Journal of Computational and Theoretical Nanoscience. 13.1 (2016): 982-988. (SCI  IF=1.343,Q2)

12. Hu, C. C., Chiou, A. H., & Hsu, C. Y. (2015). “Effects of NH3 PECVD treatment time on the performance of multiwall carbon nanotubes for antibody immobilization“. Journal of Biomedical Materials Research Part B: Applied Biomaterials. (SCI  IF=2.759,Q2)

13. M.J. Twu, A.H. Chiou,C.C. Hu, C.Y. Hsu, C.G. Kuoe, “Properties of TiO2 films deposited on flexible substrates using direct current magnetron sputtering and using high power impulse magnetron sputtering”, Polymer Degradation and Stability,(2015)17:1-7. (SCI  IF=3.163,Q1)

14. Ai-Huei Chiou, Chung-Chen Tsao, Chun-Yao Hsu “A study of the machining characteristics of micro EDM milling and its improvement by electrode coating”, INT J ADV MANUF TECH. (2015) 78:1857-1864. (SCI IF=1.779,Q2)

15. Ai-Huei Chiou ,Wen-Fa Wu , Ding-Yeng Chen ,Chun-Yao Hsu “The use of the grey-Taguchi method for the optimization of a silicon nanowires array synthesized using electroless Ag assisted etching”, J Nanopart Res (2013) 15:1866 (2013). (SCI  IF=2.175,Q1)

16. Mao-yong LIN , Chung-chen TSAO, Chun-yao HSU, Ai-huei Chiou, Peng-cheng HUANG, Yu-cheng LIN “ Optimization of micro milling electrical discharge machining of Inconel 718 by Grey-Taguchi method”,  Trans. Nonferrous Met. Soc. China Vol. 23,No. 3( 2013). (SCI  IF=0.751 ,Q2)

17. Ai-Huei Chiou, Tse-Chang Chien , Ching-Kuei Su, Jheng-Fong Lin, Chun-Yao Hsu “ The effect of differently sized Ag catalysts on the fabrication of a silicon nanowire array using Ag-assisted electroless etching ”, Current Applied Physics,: Volume 13, Issue 4 (2013), Page 717–724. (SCI  IF=1.900 ,Q2)

18. A.H. Chiou, Y.M. Chang, W.F. Wu, C.P. Chou, C.Y. Hsu, “Induced NH2 bonding of carbon nanotubes using NH3plasma-enhanced chemical vapor deposition” Journal of Materials Science: Materials in Electronics: Volume 23, Issue 4 (2012), Page 889-896. (SCI IF=1.076 ,Q2)

19. A.H. Chiou, C. G. Kuo, W.F. Wu, C.P. Chou, C.Y. Hsu, “Influence of oxygen flow rate on photocatalytic TiO2 films deposited by rf magnetron sputtering”, J Journal of Materials Science: Materials in Electronics: Volume 23, Issue 2 (2012), Page 589-594.(SCI IF=1.076 ,Q2)

20. Dong-Cherng Wen1,Chun-Yao Hsu, Ai-Huei Chiou, “Optimization of the Sputtering Process Parameters of AZO Films with Multiple Quality Characteristics”, Advanced Materials Research Vols. 512-515 (2012) Page 1961-1964.(EI) 

研討會論文(國際研討會)

1. Shih Tui-Min, Ai-Huei Chiou＊,”Mechanical Characterization of TPU/TG for Flexible Bipolar Plates via Injection Molding ”, 2025 PhotonIcs & Electromagnetics Research Symposium , (PIERS 2025),Chiba, Japan, Date: 05-09 November 2025. (日本千葉).

2. Ai-Huei Chiou＊,Chih-Chun Yang,”Development and Characterization of TPU/Oyster Shell Composite Bipolar Plates for Flexible PEMFCs”, 2025 5th International Conference on ( IC3E 2025), Japan, Date: 18-20 May 2025. (日本沖繩).

3. Ai-Huei Chiou＊,Shouyin Yang, Yi Xiang Yang, Bing-Yi Lin ,”Forecasting long-term Solar Photovoltaic with Artificial Intelligence ”, 2024 10th International Conference on ( ), Energy and Biotechnology? ((研討會名稱) 2024),(地名),(國家), Date: ( )-( ) October 2024. (( )).

4. Ai-Huei Chiou＊,Zhong-Xin Lin ,”Fabrication of TiO2Nanotube/SiNW Arrays Structure at Different Synthesis Parameters for Solar Cell Application ”, 2024 5th International Conference on ( ), Energy and Biotechnology? ((研討會名稱) 2024),(地名),(國家), Date: ( )-( ) May 2024. (( )).

5. Ai-Huei Chiou＊,Hao-Yu Liao, Jun-Luo Wei ,”Effects of TiO2 thin films on silicon nanowire arrays in heterojunction solar cells ”, 2025 1th International Conference on ( ), Surface and Coatings Technology ((研討會名稱) 2024),(地名),(國家), Date: ( )-( ) January 2024. (( )).

6. Ai-Huei Chiou＊,Qi-Chang Su; Ting-Yi Lin; Yao-Long Tsai;Hung Chih Chang;Shih-Neng Lin,” Research on Complex Sound Source Separation Techniques for the Application of Artificial Intelligence in Underground Pipeline Leakage Detection”, International Conference on( ),((研討會名稱) 2023),(地名),(國家), Date: ( )-( ) October 2023. (( )).

7. Ai-Huei Chiou＊, Hao-Yu, LIAO, Jun-Luo WEI,” Studies on the TiO2 Thin Film on the Silicon Nanowire Arrays for Heterojunction Solar”, International Conference on( ),((研討會名稱) 2023), USA, SD, Date: 19-24 May 2023. (聖地牙哥).

8. Ai-Huei Chiou＊,Cheng-Hsien Kuo, Yao-Long Tsai, Hung-Chih Chang,” Development of pipeline leakage and location identification system based on AI and optical fiber sensing technology”, International Conference on IOT, Communication and Engineering 2021,(IEEE ECIEC), Taiwan, Yulin , Date: 29-31 October 2021. (最佳論文獎).

9. Ai-Huei Chiou＊,” TiO2–Silicon Nanowire Arrays for Inorganic Solar Cell Applications”,International Conference on Metallurgical Coatings Thin Films,(ICMCTF 2021), USA, SD, Date: 26-30 April 2021. (Virtual-口頭報告).

10. Ai-Huei Chiou＊,Ting Yu Chang, Shinn-Dar Wu, Jyun Ming Huang, Yu Lin Yang and Yea Chyi Lin,” Research on Observation Technology of Low-Pressure Hydrogen energy Wall Cloud Date”,  International Conference on( ),((研討會名稱) 2020),(地名),(國家), Data: ( )-( ) August 2020. (( )).

11. Ai-Huei Chiou＊, Shinn-Dar Wu, Ssu-Han Chen,” Optimized Conductivity of PEMFC Hot Running-Layer Composite Carbon Bipolar Plates Using Taguchi Method”, 2019 8th International Conference on Environment, Energy and Biotechnology (ICEEB 2019), Okinawa, Japan, Date: 02-05 July 2019. (日本沖繩-口頭報告最佳論文獎).

12. A.H. Chiou*,” The Study of Mechanical Strength on the Injection Molding Parameters of PMMA-TG Composite Bipolar Plates”, International Conference on Metallurgical Coatings Thin Films (ICMCTF 2018), USA, SD, Date: 23-27 April 2018. (聖地牙哥). 

13. Shinn-Dar Wu,  A.H. Chiou*, Yling Huang”Fuel Cell Hot Runner-layer Composite Carbon Bipolar Plates”, International Conference on Metallurgical Coatings Thin Films (ICMCTF 2017), USA, SD, Date: 24-28 April 2017. (聖地牙哥).

14. Guo-Wei Chen, Ying-Yuan Chen, Ai-Huei Chiou, Ssu-Han Chen*, Time series forecasting using the generalized NGBM(1,1), 4th iCatse Conference on Industrial Engineering, Management Science and Applications (ICIMSA 2017), Seoul, South Korea, June 13-15, 2017.(韓國) 

15.  A.H. Chiou*, Shinn-Dar Wu,”The Study of Electrical Conductivity and Mechanical Strength on Bipolar Plate via Different Surface Sputtering”, International Conference on Metallurgical Coatings Thin Films (ICMCTF 2016), USA, SD, Date: 25-29 April 2016. (聖地牙哥). 

16. 吳信達，邱薆蕙*, 射出成型結合金屬化雙極板之強度及電性研究, 第16届全国氢能会议暨第8届两岸三地氢能研讨会, chec2015. 

17. Cheng Wei-Yang, Wu Shinn-Dar, Chunag Han-Peng, Chiou Ai-Huei，The Study of Proton Exchange Membrane Fuel Cell Fabrication and Simulation, 第16届全国氢能会议暨第8届两岸三地氢能研讨会, chec2015. 

18. 邱英雄，吳信達，邱薆蕙，林雅其，廖于君，鐘健平，回收茶備制碳化技術運用於燃料電池雙極板之研究(Research of recycling and reuse tea graphite technology used in fuel cell bipolar plates) , 第15届全国氢能会议暨第7届两岸三地氢能研讨会, chec2014. 

19. Ai-Huei Chiou*, Shinn-Dar Wu, Ming-Kun Huang, Tse-Chang Chien, Wen-Fa Wu, Chun-Yao Hsu, Chang-Ping Chou,”Silicon nanowire arrays with sliver nanoparticles as advanced electron materials for fuel cells”, THE 13TH CHINESE HYDROGEN ENERGY CONFERENCE, September 28-30,2012,(南京-口頭報告) 

20.   Shinn-Dar Wu, Ai-Huei Chiou*, Chin-Chun Chang, Chi-Lung Chang , Tien-Chi Chang , Jen-Ping Chung4, Chang-Jung Wu, Chang-Ping Chou” The study of using injection molding technology prepared fuel cell bipolar plate”, THE 13TH CHINESE HYDROGEN ENERGY CONFERENCE, September 28-30,2012,(南京) 

21.  A.H. Chiou*, J.F. Lin, C.K. Su, C. Y. Hsu, W.F. Wu, C.P. Chou,”An analysis on synthesizing Large-Area Silicon Nanowire Arrays by Electroless Metal Deposition”, Nanotechnology (IEEE-NANO), 2011 11th IEEE Conference,  USA, Portland , Date:15-18 Aug.2011, Page 187 - 192. (波特蘭-口頭報告). 

22.  A.H. Chiou*, Y.M. Chang, S.D. Wu, W.F. Wu, C.P. Chou, “Immobilizations to surface modify on carbon nanotubes of technology application in the biofuel cells”, The Third European Fuel Cell Technology and Applications Conference - Piero Lunghi Conference , Rome, Italy, December 15-18, 2009, EFC09-17190 (義大利) 

23.  S.D. Wu, A. Y. Liu, A.H. Chiou*, C.Pin Chou, C.C. Liu, “The Study of Electrical Conductivity and Mechanical Strength on Bipolar Plate Via Different Surface Sputtering”, The Third European Fuel Cell Technology and Applications Conference - Piero Lunghi Conference , Rome, Italy, December 15-18, 2009, EFC09-17186 (義大利) 

24.  S. D. Wu, W. Y. Ho, C. P. Chou, J.J.Hwang, A. H. Chiou, “The Study of Metal Film Strength Composite Low-weight Bipolar Plate for Fuel Cell”, THE 10TH CHINESE HYDROGEN ENERGY CONFERENCE, September 17-20,2009,(天津) 

25.  A.H. Chiou, Y.M. Chang, S.D. Wu, W.F. Wu, C.P. Chou, W.J. Chiou, “Surface Modification of Carbon Nanotubes (CNTs) for Biofuel-cell Aapplications by Plasma Treatment”, International Conference on Applied Energy (ICAE 2010), 21-23 April, Singapore, ID 229 (新加坡) 

26. S.D. Wu, C.C. Liu, A.H. Chiou, C.P. Chou, A.Y. Liu, “The Study of Metal Film Strength of Surface Layer and Electric Properties with Composite Bipolar Plate for Fuel Cell”, International Conference on Applied Energy (ICAE 2010), 21-23 April, Singapore, ID 227 (Status: Abstract accepted) (新加坡) 

27. Y.M. Chang, A.H. Chiou, H.C. Wen, W.F. Wu, C.P. Chou, and J.T. Sheu, “Localized Lateral Growth of Single-Walled Carbon Nanotube from Nickel Catalyst by ThermalChemical Vapor Deposition”, 3rd International Conference on Materials for 9thInternational Conference on Advanced Technologies , ICMAT 2005, p.257(新加坡). 

研討會論文(國內研討會)

1. 蕭承沛、邱薆蕙*、林忠信、王治強，"爐管法製備三維氧化鋅/矽奈米線之研究 " ，( )，( ) 2024.

2. 楊授印、邱薆蕙*、楊益翔、林秉儀，"AI 能源樞紐系統 " ，技術報告?，( )，( ) 2024.

3. 林忠信、邱薆蕙*，"將純Ti用做陽極氧化之陰極製備TiO2 奈米管陣列 " ，( )，( ) 2023.

4. 游郡瑩、蔡伊閔、邱薆蕙*，"TPU/牡蠣殼粉複合材之物性研究 " ，2023中華民國力學學會年會第四十七屆全國力學會議，CTAM 2023

5. 曾勤雅、許銘修、陳韋志、黃俊維、葉書瑋、邱薆蕙*，"智慧綠色能源屋開發與結合漫畫之能源素養養成教具開發" ，( )，( ) 2023.

6. 楊芝鈞、邱薆蕙*，"TPU/牡蠣殼粉複合材料射出成型製備雙極板之機械性質之研究 " ，( )，( ) 2023.

7. 吳翊勤、 施鐓湣、 黃英達、 陳柏宏 、 邱薆蕙*，"不同退火溫度對磁控濺鍍製備SiC薄膜之性能研究 " ，2022中國機械工程學會第三十九國學術研討會，CSME 2022.

8. 張世霖、魏君駱、賴彥廷、鄭慶全、邱薆蕙*，"以磁控濺鍍於不同射頻功率下製備TiO2於矽奈米線陣列異質接面之研究 " ，2021中國機械工程學會第三十八國學術研討會，CSME 2021.

9. 魏君駱、張世霖、鄭慶全、賴彥廷、邱薆蕙*，"以磁控濺鍍製備AZO於不同結晶型態之TiO2-SiNW arrays異質接面之研究 " ，2021中國機械工程學會第三十八國學術研討會，CSME 2021.

10. 倪瑞鴻、陳湘霖、李東諮、廖思婷、邱薆蕙*，"以電化學法於低溫合成 PPy 導電流道層不鏽鋼雙極板之研究 " ，( )，( ) 2021.

11. 蔡曜隆、張洪誌、林子立、郭家憲、林庭儀、謝張浩、蔡博淵、邱薆蕙*，"基於AI技術之管線洩漏與定位辨識系統開發 " ，( )，( ) 2021.

12. 蔡曜隆、張洪誌、林士能、邱薆蕙*、林高玄、丘宗能、龍澐翔、王柱翔、李明翰，"基於光纖感測技術之管線洩漏與定位辨識系統開發 " ，( )，( ) 2021.

13. 黃星榜、邱薆蕙*，"以不同拋光製程參數探討PMMA光學透鏡表面粗糙度於新型LED車燈之研究 " ，2020中國機械工程學會第三十七國學術研討會，CSME 2020.

14. 廖皓宇、魏君駱、張世霖、邱薆蕙*，"以磁控濺鍍於不同氣體通量下製備TiO2於矽奈米線陣列異質接面之研究 " ，2020中國機械工程學會第三十七國學術研討會，CSME 2020.

15. 林士能、郭承憲、蔡曜隆、張洪誌、魏君駱、邱薆蕙*，"工業管路缺陷之套管監測模組研究 " ，2020中國機械工程學會第三十七國學術研討會，CSME 2020.

16. 鄂暄蓓、劉育成、吳信達、邱薆蕙*，"以農業廢棄物再製生物碳材之研究 " ，2019中國機械工程學會第三十六國學術研討會，CSME 2019. 

17. 劉育成、廖皓宇、黃星榜、邱薆蕙*，"創新益智積木設計應用於老年人口之研究  " ，2019中國機械工程學會第三十六國學術研討會，CSME 2019. 

18. 陳聖勳、邱薆蕙*，”循環伏安法製備導電高分子聚吡咯鍍膜之特性研究” ，第17屆精密機械與製造科技研討會(PMMT 2019)。

19. 邱薆蕙*、張佑銘、劉育成，” 以電漿熱烈解廢溶劑再製碳材之研究” ， 2018中國機械工程學會第三十五國學術研討會，CSME 2018. 

20. 許智翔、邱薆蕙*，” 以大氣電漿噴塗鋁箔片製備鋰電池正極電極研究 ” ，第16屆精密機械與製造科技研討會(PMMT 2018)。 

21. 邱薆蕙*、劉雲逸，”以射出成型技術製備PEMFC之PMMA-TG複合雙極板強度研究” ， 2017中國機械工程學會第三十四屆全國學術研討會，CSME 2017.

22. 廖柏凱、邱薆蕙*，” 質子交換膜燃料電池PMMA熱壓碳流道層複合雙極板之導電性最佳化研究” ， 2017中國機械工程學會第三十四屆全國學術研討會，CSME 2017.

23. 許文輔、邱薆蕙*，“利用射出成型探討不同玻璃纖維比例增強ASA複合材料衝擊強度之研究“，第40屆高分子學術研討會, 2017 ICAPST.

24. 林佳樺、邱薆蕙*，“利用射出成型探討不同玻璃纖維比例增強回收料PP複合材料衝擊強度之研究“，第40屆高分子學術研討會, 2017 ICAPST.

25. 劉雲逸、邱薆蕙*、吳信達，“利用射出成型探討PPMA/TG雙極板翹曲之研究“，第40屆高分子學術研討會，2017 ICAPST.

26. Ssu-Han Chen*, Ai-Huei Chiou, Chien-Chih Wang, NMF with application in detecting defects on LED substrate, Proceedings of the 2016 International Symposium on Semiconductor Manufacturing Intelligence (ISMI2016), Hsinchu, Taiwan, August 7-10, 2016.

27. 邱薆蕙*、吳信達、黃影、蕭和攀、劉雲逸，" 燃料電池熱壓碳流道層複合雙極板之研究 "， 2016中國機械工程學會第三十三屆全國學術研討會，CSME 2016.

28. 吳信達、邱薆蕙、林雅其、廖于君、張超彥，" 創新回收鋰電池材料三維反應槽機構設計"， 中華民國力學學會第四十屆全國力學會議，CTAM 2016.

29. 董承翰、邱薆蕙*，“利用射出成型探討不同玻璃纖維比例增強ASA複合材料機械性質之研究“，2016 精密機械與製造科技研討會，PMMT 2016.

30. 吳書亞、邱薆蕙*，“大氣電漿噴塗CrN膜於不同粗糙度AISI 304不銹鋼之研究“， 2016 精密機械與製造科技研討會, PMMT 2016.

31. 吳信達、邱薆蕙*，"射出成型燃料電池金屬化雙極板之強度及電性之研究 " ，( )，CSME 2015

32. 邱薆蕙*、張哲瑋、張洪誌、許春耀，"以無電鍍蝕刻製備矽奈米線太陽能抗反射層之研究"，2015新世代太陽能電池先進技術研討，桃園市中央大學. (海報競賽-佳作獎)

33. 張洪誌、邱薆蕙*、張哲瑋、許春耀、"物理氣相沉積法製備AZO透明導電膜於蘇打玻璃之研究"，2015新世代太陽能電池先進技術研討會,桃園市中央大學. (海報競賽-佳作獎)

34. 吳信達，邱薆蕙*，吳滄榮，"以射出成型技術備製燃料電池雙極板之應用"，第二屆塑性加工研討會，TSTP 2014.

35. 邱薆蕙*，吳信達，許春耀，"以無電鍍蝕刻探討矽奈米線陣列合成與其太陽能抗反射層應用"，第二屆塑性加工研討會，TSTP 2014.

36. 邱英雄、吳信達、邱薆蕙*、林雅其、廖于君、鐘健平，"回收茶備制碳化技術運用於燃料電池雙極板之研究 Research of recycling and reuse teagraphite technology used in fuel cell bipolar plates " ，( )，CSME 2014.

37. 邱薆蕙*，簡嗣展，林祐全，許春耀，蘇清貴，林正峰，周長彬，吳文發，"Optimization by Grey Relational Analysis for SiNW arrayss synthesizing by Electroless Metal Etching "，中國機械工程學會第二十八屆全國學術研討會，CSME 2011

38. 林正峰，邱薆蕙*，蘇清貴，許春耀，吳文發，周長彬，"以無電鍍蝕刻製備高密度且準直之矽奈米線陣列"，精密機械與製造科技研討會, PMMT 2011.

39. 蘇清貴，邱薆蕙*，林正峰，林祐全，簡嗣展，許春耀，周長彬，吳文發，"銀觸媒輔助無電鍍蝕刻對奈米線成長之影響"，中國機械工程學會第二十八屆全國學術研討會，CSME 2011.

40. C.K. Su, A.H. Chiou*, J.F. Lin, W.F. Wu, C.P. Chou, S.D. Wu, "LiFePO4/C nanocomposite cathode materials by a new solid-state method", SNDT 2011

41. 邱薆蕙*、張佑銘、吳信達、邱萬鐘、吳文發、周長彬，"奈米碳管表面改質於生物燃料電池或生物感測器之固定化技術應用"，中國材料科學學會99年會論文集，2010.

42. 吳信達、邱薆蕙*、周長彬，"鋰電池電極技術導入燃料電池膜電極運用之提升刮塗可靠度評估"，中國材料科學學會99年會論文集，2010。

43. 邱薆蕙*、張佑銘、吳文發、周長彬， “奈米碳管電漿處理之生物固定化技術研究” ，生醫論壇96年會論文集，新竹市，2007。

44. 梁晃千、邱薆蕙*、彭玉婷，“高強度生物吸收性骨固定裝置設計與功能評估” ，生醫論壇96年會論文集，新竹市，2007。

45. 李聰慶、邱薆蕙*、李正雄、鄭弘昌， “三板型射出模具模板控制機構之創新設計” ，9th海峽兩岸機構學術研討會論文集，高雄市，2006。