We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-08 · 7 min read · Independent comparison
If you want a tidy, damage-proof home for the headset you already own, choose NexiGo PS5; if you need an actual wired gaming headset to hear footsteps and talk to your squad, choose ETWAR B3. That is the whole comparison in one line, and it matters most for teachers who use a headset for teachers' work all day and then game on a console at night — one of these products is a place to put your gear, the other is the gear itself.
• NexiGo PS5 — biggest strength: a sturdy aluminum-alloy and ABS holder that keeps a headset off the coffee table, scratch-free, and supports up to 4 lbs on a PS5 console.
• NexiGo PS5 — biggest trade-off: it makes no sound. It is storage, not audio, so it does nothing for you if you still need a headset.
• ETWAR B3 — biggest strength: a complete wired over-ear headset with a noise-isolating 360-degree mic, 40mm neodymium drivers, in-line volume and mute, and a 3.5mm jack plus a 2-in-1 mic splitter in the box.
• ETWAR B3 — biggest trade-off: it is wired only, with no wireless technology listed, so you are tethered to the controller or device.
• Pick NexiGo PS5 if you already own a headset and want it protected, organized, and off your desk.
• Pick ETWAR B3 if you need the headset itself — for console gaming, PC, laptop, tablet, or phone.
The NexiGo PS5 Headphone Holder is a minimalist hanger with a supporting bar, built specifically for PS5 headphones but compatible with most third-party sets. The one-piece curved structure is the interesting part: it uses that curve to hold a surprising amount of weight, with a stated maximum load of 4 lbs on a PS5 console. That is a lot of headroom for a headset, which tells you the design is meant to be genuinely sturdy rather than decorative.
Materials back that up. It is made from aluminum alloy and high-quality ABS plastic, and the listing describes it as thick and sturdy. The pitch is protection: keeping your gear clear of the console so both stay safe and scratch-free, holding the headset firmly so it does not slide off, and protecting the headphone surface from wear and tear. The design also allows it to attach to more than just a PS5, so it can live on a desk edge or shelf too.
At just 18.14 g and 1.62 x 1.3 x 3.54 inches, it is small and light enough to disappear into a setup. The rubber element in the design points to grip rather than slip, which is exactly what you want from a hanger.
ETWAR B3: Who It's For
The ETWAR B3 is a blue, over-ear wired gaming headset built around a 3.5mm jack. That jack is the headline feature: it lets you receive and send voice clearly, and ETWAR lists compatibility with PS4, PS4 Pro and Slim, PSP, Xbox One, Nintendo Switch, laptops, computers, tablets, iPads, and mobile phones. The box includes the headset plus a 3.5mm 2-in-1 headphone and mic splitter cable, which is the piece you need when a device has separate headphone and mic ports.
Audio hardware is where this gets concrete. The B3 uses 40mm neodymium dynamic drivers with a 20 Hz – 20,000 Hz frequency range and 32 ohm impedance. Low impedance like that is friendly to controllers, laptops, and phones — you do not need a separate amp to get usable volume. ETWAR's own framing is about hearing bombings, footsteps, and environmental cues clearly, and a sensitive microphone that captures sound from all directions while reducing background noise so your callouts land accurately.
Comfort is the other pillar. Breathable protein ear pads, a multi-point adjustable and retractable headband, and skin-friendly faux-leather material are all aimed at reducing heat buildup and fatigue over long sessions. In-line controls keep it simple: a rotating volume controller and a one-click mic mute, handled remotely on the cable rather than on the ear cup.
Side-by-Side: Which Should You Choose?
• Best for protecting an existing headset → NexiGo PS5. Scratch-free storage and a firm hold are the entire point.
• Best if you need actual audio → ETWAR B3. It is a headset, not a hanger.
• Best for multi-platform gaming → ETWAR B3. PS4, Xbox One, Switch, PC, tablet, and phone are all covered by the 3.5mm jack.
• Best for clutter and organization → NexiGo PS5. Controllers and headphones hang neatly out of the way.
• Best for long sessions → ETWAR B3. Breathable protein pads and an adjustable headband are designed to cut heat and fatigue.
• Best for voice chat clarity → ETWAR B3. The 360-degree noise-isolating mic and one-click mute are built for team comms.
• Best if you want zero setup → NexiGo PS5. Attach it, hang your gear, done.
• Best if you want a work-and-play crossover → ETWAR B3. The same wired headset handles calls on a laptop and gaming on a console.
In my opinion, most people reading a console gaming headphones comparison should buy the ETWAR B3. It is the only one of the two that actually does something while you play: the 40mm drivers, noise-isolating mic, in-line volume and mute, and broad 3.5mm compatibility cover console, PC, and phone, and the over-ear comfort design holds up for long sessions — including the long days a teacher puts in. I would only steer you to the NexiGo PS5 if you already own a headset and your real enemy is clutter, scratches, and gear left on the coffee table. For teachers, that pairing is the honest answer: buy the B3 as your headset for teachers and gaming, then add the NexiGo holder to keep it safe. Check the current price on Amazon before you commit, since that is what actually decides the tie.
FAQ
There is no single answer, but if you want a wired option that works across Xbox One, PS4, Switch, PC, and mobile, the ETWAR B3 is designed for exactly that — a 3.5mm jack, a 360-degree noise-isolating mic, and 40mm neodymium drivers in a comfortable over-ear frame.
Not strictly, but it helps. The NexiGo PS5 keeps a headset off surfaces where it can pick up dirt and scratches, holds it firmly in place, and supports up to 4 lbs on a PS5 console — so it is a storage and protection purchase, not an audio one.
By design, yes. It uses breathable protein ear pads, skin-friendly faux leather, and a multi-point adjustable, retractable headband aimed at reducing heat buildup and hearing fatigue. It is wired with in-line volume and mute, so there is no battery to manage mid-session.
One is a headset and one is a holder. The ETWAR B3 produces sound and captures your voice across many devices; the NexiGo PS5 stores and protects a headset you already own. They solve completely different problems and can happily be used together.
Yes. ETWAR lists compatibility with laptops, computers, tablets, iPads, and mobile phones via the 3.5mm jack, and the package includes a 2-in-1 mic splitter cable for devices with separate headphone and microphone ports.
• AGPTEK IPX8 vs Faxoimu Earbuds: Ipx7 Waterproof Earbuds
• JVC Lightweight Flat vs LilGadgets Connect+ Pro
• ASKUBSKU USB C Headphones vs Yunsailing 10
• LORELEI QC60 vs Ordtop Earbuds: Bluetooth Headphones Deep
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.