Netgear Extender Setup - How to Setup Extender through WPS button and manually?

Netgear extender is one of the best options through which you can get rid of the dead spots in your home or office. It is useful in extending the coverage of the Wi-Fi network of your router. Netgear is a prominent multinational computer networking company based in America. It helps its users have the smartest home in the neighborhood by providing them with the fastest, latest and useful networking technology. Whether it is about advanced wireless connectivity to superior streaming and storage solutions, it offers you an advanced networking system to ensure that you experience high-speed internet connectivity. Therefore, if you also want to get rid of the dead spots of your home or office and increase the speed of your slow internet connection, this is the best option for you. Moreover, in this write-up, we have provided the quick and easy steps for Netgear extender setup through which you can set up the extender easily.

Steps to perform Netgear Extender Setup through WPS Method

The easiest way to set up Netgear Extender is through the WPS method. Here, we have given the easy and straightforward steps that you must follow to perform Netgear Extender Setup without any issue:-


  • Firstly, you must make sure that your extender is powered on.

  • Now, press and hold the WPS button given on your Netgear extender.

  • After this, press the WPS button located on your router.

  • The LED light on the extender will turn into solid green. It indicates that you have configured your router with the extender properly.

  • Note: The users who have a dual-band range extender will have to repeat the same procedure.

  • In the end, you should connect the extender’s network by using the same passphrase that you use for the network of your router.

  • You should see the Wi-Fi extender manual to get the default username and password of the extender.

  • Hence, with the help of the above procedure, you have successfully completed the Netgear extender setup. Now, you can connect your Wi-Fi devices to the extended Netgear_ext SSID and experience seamless internet connection all across your home or workplace.

However, all the above-mentioned steps of the Netgear extender setup are easy to follow and perform. But if you still face any difficulty at any step, feel free to contact the expert Netgear customer support technicians.

Netgear Extender Setup - Manual Method

In this section of the blog, we'll provide you with the step-by-step procedure to set up the Netgear extender through the manual method. Thus, if you want to perform Netgear extender setup manually, you must follow the steps below:-


  • Firstly, turn your Netgear extender by plugging it into the electrical outlet.

  • Now, launch the internet browser on your device and go to its address bar.

  • In the browser’s address bar, type “mywifiext.net” and press the “Enter” key.

  • After this, the official Netgear extender login page will open on your device screen.

  • In the next step, you'll be asked to enter your username or passphrase.

  • Once you're done with the previous step, recheck the entered information and hit the log in button.

  • After this, the Netgear installation assistant or setup wizard will appear on the screen.

  • Then, unplug the extender from the power outlet and place the extender wherever you need to.


Hence, you have successfully completed the Netgear extender setup. If you have any difficulty performing the procedure, make sure you get in touch with Netgear customer support.


Here we included two Netgear extender setup process, i.e., through the WPS button and Manually. In addition to this, we also discussed and answered some frequently asked questions. Therefore, you can set up your Netgear extender using any of the methods discussed above.

FAQs

In this section of the write-up, we'll discuss some of the most frequently asked questions about the Netgear extender setup.


Q. Why am I unable to see Netgear genie?

A. Firstly, make sure that the computer device that you are using during the setup procedure is set up to use the DHCP. Secondly, ensure that the wireless device that is connected to the extender shows a solid green light and you have a valid IP address. Finally, launch your web browser and enter mywifiext.net or the default IP of the extender 192.168.1.250.


Q. How to update the Netgear firmware router?

A. To update the Netgear firmware, you should go to the Smart Wizard and then check for any updates if available. After this, you will have to follow the on-screen instructions to upgrade the firmware.


Q. How to set up the Netgear Extender to use the same SSID as the router?

A. Netgear offers some wireless extenders that allow the users to choose the SSID they want. Moreover, if you want to perform the Netgear Extender setup in a way that the extender uses the same SSID as a router, you should change the extender name and use the router SSID.