A tool fitted with a cutting tool attachment or driving tool attachment, a drill - the most versatile item in the carpenter's toolbox - allows the operator - woodworkers and mechanical sculpture makers - a steady workplace that will secure the material (whether metal, wood, or plastic) that it is working on.
(Also read: Top 7 Best Cordless Power Tool Brands -2018 Update)
It takes a very steady hand to cut a circle out of wood with the help of a drill. Well, today we will know how to make a circle in wood with an electrical power motor of drill. Make sure to use a lot of physics, common sense as well as keep it simple to do it correctly. Below is our recommended step by step guideline to cut circle while doing some improvisations with a drill and doing it with the compass way.
1. How to cut a circle in wood with a drill?
Create the Plywood Into a Circle
A screw, especially a large one, has a tendency to split the wood as it digs into the wood and separates the grain. If you want to determine how big the circular end of the jig should be, it is wise to take off the sub-base of the router. Drilling a pilot hole through the center of the wood prior to cutting plywood into a circle helps you to insert the screw and minimize wood splits.
Drill Holes in the Circle
Right from the inside of the line, you can slowly start cutting the wood with the knife by turning on the saw and rotating the wood using a push stick. In order to ensure even contact at the start, it is necessary to get a perfectly straight hole. Raise the saw blade 1/8” and make shallow cuts after each pass that work deeper and deeper until you have cut a circle through the wood.
Saw a circle
Start the drill motor by pushing a button. After that, use your hand to bring the bit into the firm mechanical contact with the wood and use a simple jig to slowly guide the jigsaw from the hole in the center toward the pencil line marking the curved or circular edge of the circle. Use it intelligently, and you will get very good results.
2. How to Cut Circle Hole in Wood?
How to use routers, saws, and other basic woodworking tools to mark, cut and fine-tune curves in wood? First, you need to draw a circle on the surface of the wood with some kind of compass. Do a piece of string and a pencil make sense when it comes to drawing such a circle? No one can be sure that it will come out even.
Next, use a jigsaw to cut out the circle, but now follow the pencil line marking the outside of the circle with a tighter diameter. On making a cut with a jigsaw, the key is working slowly and smoothly — pay particular attention to the blade and try not to stop and start too much. Not until you have reached the desired circle diameter will you remove the inner circle of plywood.
Related Articles:
How to use a cordless drill safe and easy?