How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 6 min read · Independent comparison
• NCHONHONG Headphone Holder Under — biggest strength: a tool-free adjustable clamp that grips desks from 0.2" to 2" thick, plus a foldable aluminum body and a built-in cable loop.
• NCHONHONG Headphone Holder Under — biggest trade-off: it needs a desk edge or shelf lip to clamp onto, so it can't go on a bare monitor back or a glass panel with no lip.
• Vaguelly Headphone Hook Bracket — biggest strength: a compact, lightweight adhesive hook that sticks to PC monitors and smooth surfaces and holds small to large headsets.
• Vaguelly Headphone Hook Bracket — biggest trade-off: it's a stick-on pad, so placement is more or less permanent and it depends on a clean, smooth surface to stay put.
• Pick NCHONHONG if you want a sturdy, repositionable under-desk mount for a desktop gaming or work station.
• Pick Vaguelly if you want a discreet hook on the side of your monitor with almost no desk footprint.
The NCHONHONG is the more substantial of the two. It's made from brushed aluminum and uses an adjustable mechanical locking clamp, so it attaches to surfaces up to 2 inches thick — desks, cabinets, shelves, and the like. The knob tightens by hand; there's a mini wrench in the box, but the everyday install is tool-free. You set the clamp to your desk's thickness, tighten, and the top cover protects the surface underneath while holding firm.
The folding part is what makes it work for a Windows PC desk. You can mount it horizontally or vertically depending on where your desk edge sits, and when you're not using it the hanger folds down to something smaller than your palm. That means it disappears when your setup is idle instead of poking out at knee level. The raised end tip stops your headphones from sliding off, and the soft silicone padding sits between the band and the hanger so nothing gets scratched.
It's not just a headphone hook, either. The cable loop keeps a headset cord tidy and stops it dragging or tangling, and you can run USB charging cables through it too. The sheet rates it for up to 2 pounds, which covers most over-ear headsets, and it ships with the hanger, the cable organizer and the mounting hardware.
Vaguelly Headphone Hook Bracket: Who It's For
The Vaguelly takes the opposite approach. It's a plastic hook with a high-strength adhesive pad on the back, and it's tiny — 3.26 x 2.95 x 0.90 inches, weighing 1.76 ounces. You peel, press it onto a PC monitor or a smooth wall, and your headset hangs off the side. No clamp, no tools, no desk edge required.
That small footprint is the whole point. On a tight Windows PC desk where every inch of surface is spoken for, a hook on the monitor bezel or the side of a cabinet keeps your headphones within reach without stealing any desk space at all. The sheet says it holds small to large headsets and is built to prevent bending, pressing and scratching, which matters if you're hanging a heavier gaming headset rather than a light pair of earbuds.
The mounting type is listed as tabletop and wall mount, and the fastening type is a sticky pad, so think of it as a set-and-forget placement rather than something you move around. The sheet also lists a unit count of 4, so you're getting more than one hook — handy if you want one on the monitor, one on a shelf and a spare. It's listed as suitable for gaming setups, workstations, study areas, homes, offices, schools and cafes.
Buy it if you want a nearly invisible hook on your monitor or a smooth wall and you don't want to touch a screwdriver or a clamp. Skip it if you need to reposition it often, or if your mounting surface is textured, dusty or curved in a way a flat adhesive pad won't sit flush on.
Side-by-Side: Which Should You Choose?
• Best for a full desk setup → NCHONHONG Headphone Holder Under. The clamp, cable loop and foldable arm make it a proper desk accessory, not just a hook.
• Best for holding a cable too → NCHONHONG Headphone Holder Under. The built-in cable loop is made for headset cords and USB charging cables.
• Best for a quick, tool-free stick-on → Vaguelly Headphone Hook Bracket. Adhesive pad, press, done.
• Best for thicker desks and shelves → NCHONHONG Headphone Holder Under. The clamp fits surfaces from 0.2" up to 2" thick.
• Best for heaviest loads → NCHONHONG Headphone Holder Under. It's rated to 2 pounds and built from aluminum, so it won't flex under a big headset.
• Best for moving between spots → NCHONHONG Headphone Holder Under. The clamp can be repositioned; a sticky pad is a one-time placement.
• Best for a monitor-side hook on a Windows PC → Vaguelly Headphone Hook Bracket. It's designed to sit discreetly on PC monitors and smooth surfaces.
For a Windows PC desk, I'd buy the NCHONHONG Headphone Holder Under. In my opinion it's the more useful of the two because it does three jobs — holds the headset, manages the cable, and folds out of the way — and the aluminum clamp feels like it'll outlast a sticky pad. If your desk is genuinely full and the only free real estate is the back of your monitor, the Vaguelly is the smarter, smaller call. Otherwise, go with the clamp. Either way, check the current price on Amazon before you commit, since that's the one thing that can swing this decision.
how to connect headphones to windows pc
Plug the headphone cable into your PC's 3.5mm jack (or the green audio-out port on a desktop), or pair Bluetooth headphones through Settings, then Bluetooth & devices, then Add device. Once connected, set the headphones as the default output in your sound settings. A holder like either of these just keeps them off the desk between sessions — it doesn't affect the connection.
how to connect headphones to pc windows 10
On Windows 10, open Settings, then System, then Sound, and pick your headphones under Output. For wired sets, just plug into the audio jack and Windows usually switches over automatically. For Bluetooth, use Settings, Devices, then Add Bluetooth or other device. After that, hang them on your chosen hook or clamp so they're ready next time.
how can i connect my headphones to my pc
Check the plug type first. A 3.5mm jack goes into the audio-out port; a USB headset goes into any free USB port and Windows picks it up on its own. Bluetooth headsets need pairing once, then they reconnect automatically. If you're short on desk space while all this is plugged in, an under-desk or monitor-mounted holder keeps the headset and its cable out of the way.
how to use headphones on pc
Connect them, then right-click the speaker icon in the taskbar, open Sound settings, and select your headphones as the output device. Adjust volume from the same menu or the headset's own controls. Between uses, rest them on a hook or holder rather than the desk — it keeps the band from getting pressed and the cable from tangling.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: ONEGenug Headphone Stand Wood vs FAAEAL Studio3, JTLB Sport vs Lenovo Headphone 2000: Headphones for Commute, LilGadgets Connect+ Style On-Ear vs Againmore Hard Headphone Case