How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-27 · 7 min read · Independent comparison
The "switch headphones" angle is what trips people up here. Sometimes it means headphones for a Switch console. Sometimes it means a part that fixes the Switch's headphone jack. Sometimes it means switching audio between devices. Read the specs and the split becomes obvious.
• Mustpoint 2x biggest strength: it is a direct replacement 3.5mm headphone jack port for the Nintendo Switch, and it lives on the game slot sub-board, so the whole mainboard does not have to come out.
• Mustpoint 2x biggest trade-off: it is a bare internal component. You must open the console, desolder the old port and solder this one in. No plug-and-play, no audio until the repair is done.
• SKAPENDY Gaming Headset biggest strength: a complete wireless headset with 2.4GHz low-latency Game Mode, Bluetooth for Switch, Mac and mobile, 50mm drivers, an ENC boom mic and up to 50 hours of playtime.
• SKAPENDY Gaming Headset biggest trade-off: it is wireless only — no 3.5mm jack at all — so it relies on its 2.4GHz dongle or Bluetooth, and it costs far more than a single repair part.
• Who each pick is for: Mustpoint 2x is for a technically confident Switch owner repairing broken headphone audio. SKAPENDY is for a player who wants a headset to listen and talk on right out of the box.
The Mustpoint 2x is a repair part, full stop. It is a 3.5mm headphone jack port socket made for the Nintendo Switch console, and its whole job is to bring back headphone audio when the original socket fails. If your Switch only plays sound through the built-in speakers, or the audio cuts in and out when you move the plug, that is exactly the kind of headphone-audio fault this part is designed to address.
What makes it friendlier than a lot of console repairs is where the port sits. It is mounted on the game slot sub-board module rather than buried on the mainboard, and that sub-board unplugs from the mainboard. In practice that means you can swap the socket without pulling the entire mainboard out of the shell — fewer steps, less risk of knocking something else loose along the way. The manufacturer rates the job at a medium technical level.
The catch is that "medium" still means real soldering. You have to open the console, desolder the old port, then solder the replacement into place. There is no connector to click in. So this is not for someone who wants sound today with zero tools. It is for the person who already owns a soldering iron, is comfortable with small electronics, and would rather repair the Switch they own than replace it. If that is not you, skip it — a headset will never fix a broken console jack, and this part will never give you a headset.
The SKAPENDY VK81 is the opposite kind of product: a finished, wearable wireless gaming headset. Its headline feature is a proprietary 2.4GHz Game Mode that the maker rates at under 20ms of latency, which is the number that matters in fast FPS play. It pairs with PS5, PS4, PC, Switch, Mac and mobile either through that 2.4GHz connection or over Bluetooth 5. There is no 3.5mm jack on it at all — it is wireless only, and that is a deliberate design choice, not an oversight.
Audio comes from 50mm titanium-coated dynamic drivers covering 20Hz–20,000Hz at 32 ohm, with cinematic 3D surround processing. The claim that stands out is directional accuracy: the maker says the driver design improves it by 20% over standard drivers, which is the sort of thing that matters when you are trying to place a distant footstep. The mic is a 360° rotatable, detachable dual-beamforming ENC unit, rated to cut around 90% of background noise — keyboard clatter, fans, room hum — so your squad hears your callouts rather than your desk.
Comfort is clearly a design priority. It weighs 12 oz, uses a suspension-style headband to spread the load, and pairs that with breathable memory-foam over-ear cups that the maker specifically calls out as glasses-friendly. The 1200mAh battery and low-power chipset are rated for up to 50 hours of active play, which is roughly a week of normal sessions between charges. Controls are simple push buttons with volume control, and active noise cancellation is part of the package.
So who should buy it? Anyone who wants one headset to cover PS5, PC, Switch and phone, and who values a boom mic, long battery life and low-latency wireless over everything else. Who should skip it? Someone who needs a wired 3.5mm connection — for a wired controller, a mixamp, or a device with no Bluetooth — because the VK81 simply does not offer one. And anyone whose actual problem is a broken Switch headphone socket, since a headset cannot repair a dead jack.
Side-by-Side: Which Should You Choose?
• Best for actually listening to game audio today → SKAPENDY Gaming Headset. Unbox, connect over 2.4GHz or Bluetooth, play.
• Best for low-latency competitive FPS → SKAPENDY. The 2.4GHz Game Mode is rated under 20ms, well below the 40ms+ the maker attributes to ordinary Bluetooth headsets.
• Best for team chat → SKAPENDY. The detachable ENC boom mic is built for voice comms; Mustpoint has no mic and no audio output of its own.
• Best for long sessions → SKAPENDY. 12 oz, suspension headband, memory-foam cups and up to 50 hours of battery.
• Best for multi-device switching → SKAPENDY. PS5, PS4, PC, Switch, Mac and mobile over 2.4GHz or Bluetooth 5.
• Best for a DIY repairer on a tight budget → Mustpoint 2x. A single small part versus a whole headset — but only if you can solder.
• Best for someone who refuses to open their console → SKAPENDY. No disassembly, no soldering, no risk of damaging the Switch.
If you put these two in front of me, I would buy the SKAPENDY Gaming Headset — because for the overwhelming majority of people searching "switch headphones," the goal is to hear the game and talk to teammates, and that is exactly what it does out of the box across PS5, PC, Switch and mobile. I would only choose the Mustpoint 2x if my Switch's 3.5mm socket were genuinely broken and I already knew my way around a soldering iron. They are not rivals. They are answers to two completely different problems. Pick the one that matches yours.
how to switch headphones between devices
It depends on the headset. The SKAPENDY VK81 offers two routes: a 2.4GHz wireless connection and Bluetooth 5, and it lists PS5, PS4, PC, Switch, Mac and mobile as supported. In practice you move between devices by switching the headset between those two connection modes and pairing to the device you want.
how to switch headphones to headset windows 11
On Windows 11 you change the active output in the sound settings — open the system sound options and pick the headset as the playback device. The SKAPENDY VK81 connects to a PC either through its 2.4GHz wireless link or over Bluetooth 5, so it appears as a playback and recording device once connected.
how to switch headphones to speakers on computer
This is a playback-device change on the computer, not something the headset controls. You select the speakers as the output in your system sound settings to send audio back to them. Note that the SKAPENDY VK81 is wireless only with no 3.5mm jack, so it never occupies your computer's headphone socket in the first place.
how to switch headphones left right
If you mean swapping which ear a headset sits on, the SKAPENDY VK81 uses over-ear memory-foam cups on a suspension headband, and its boom mic is 360° rotatable and detachable, so you can reposition the mic to either side. If you mean channel balance in Windows, that is adjusted in the sound settings rather than on the headset.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: OnePlus Bullets vs Transformers Flux T86, jechan Ear bud vs TANGZU Wan'er S.G II, Betron BS10 vs Sidpro Earbuds: Corded Headphones, ELECDER i45 vs FosPower Kids Headphones: Portable ON Ear