We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-21 · 7 min read · Independent comparison
If you want to repair a broken headphone socket inside a Nintendo Switch, choose Mustpoint 2x; if you need to switch audio between two 3.5mm devices without unplugging cables, choose cooidea 3.5mm. These two products share almost nothing except the number 3.5 in their names. One is a soldering repair part. The other is a passive desktop switch box. So before you compare them feature by feature, get clear on which job you actually have — because buying the wrong one wastes your time either way.
• Mustpoint 2x — biggest strength: it restores headphone audio on a Switch by replacing the exact jack port that sits on the game slot sub-board, and that sub-board unplugs from the mainboard, so you don't have to strip the whole console.
• Mustpoint 2x — biggest trade-off: it is a bare electronic component, not a plug-and-play gadget. You must open the console and desolder the old port before soldering the new one in. No soldering iron, no repair.
• cooidea 3.5mm — biggest strength: a bi-directional 1-in-2-out / 2-in-1-out switcher with a manual toggle, working with TS, TRS and TRRS plugs in both CTIA and OMTP wiring, and no ground loop noise thanks to its low-impedance, full-signal switching design.
• cooidea 3.5mm — biggest trade-off: it does not repair anything and does not amplify anything. It only routes an existing signal, and it needs a free hand on the toggle every time you want to change the path.
• Who each is for: Mustpoint 2x is for a technically confident Switch owner doing a socket repair. cooidea 3.5mm is for anyone juggling two audio sources or two listening devices at a desk, in a studio corner, or on the road.
Mustpoint 2x is a single-purpose spare part: a 3.5mm headphone jack port socket made for the Nintendo Switch. If your handheld still plays game audio fine through the speakers but the headphones side has gone unreliable, this is the kind of component a repair addresses. The part is designed to sit where the original jack sits — on the game slot module board — and that detail matters more than it sounds. Because that sub-board unplugs from the mainboard, the jack can be swapped without pulling the entire mainboard out of the shell. In repair terms, that is a meaningful shortcut.
The catch is the skill requirement, and it is not a small one. Fitting this part means opening the console, desoldering the failed port, and soldering the replacement into place. Mustpoint itself frames the job as medium technical level, and that feels honest. You need a soldering iron, some experience with fine joints, and patience with small ribbon connectors and screws. If you have done board-level work before, this is a reasonable evening project. If you have never soldered, this is not the part to learn on — a Switch mainboard is an expensive practice board.
So who should buy it? Someone with a Switch whose headphone output has failed, who already owns soldering gear, and who would rather fix the console they have than replace it. Who should skip it? Anyone hoping for a drop-in fix, anyone without soldering skills, and anyone whose actual problem is a frayed cable or a dirty plug rather than the socket itself. It weighs just over half an ounce and arrives as a small package — this is a component in a bag, not a kit with tools.
cooidea 3.5mm is a passive audio switcher — a small box with one common 3.5mm port and two channels, plus a toggle switch. It runs in two directions. In 1-in-2-out mode you feed one source in and send it to either of two outputs, so you can push your PC's audio to a pair of headphones or to powered speakers with one flick. In 2-in-1-out mode you connect two sources — say a phone and a laptop — and switch which one reaches your headphones or amplifier. No drivers, no app, no batteries, no USB power. Just cables and a switch.
The spec sheet is unusually thorough for a part like this, and two details stand out. First, connector support: it handles two-pole TS, three-pole TRS and four-pole TRRS plugs, and it works with both CTIA and OMTP wiring standards. That means headset plugs with a microphone and inline remote, balanced headphone cables, and AV cables are all in scope — a lot of cheap switchers choke on TRRS. Second, noise: cooidea designed it with a full-signal switching structure and low-impedance circuitry specifically to kill ground loop noise, the hum you get when two grounded devices share an audio path. Gold-plated contacts are there for stable, durable connections.
Physically it is tiny: roughly 40 x 38 x 10 mm, 13 grams, black aluminum alloy housing, and it ships with a TPU audio cable. That is small enough to sit on a desk without becoming clutter or to drop in a bag. It also carries a one-year manufacturer warranty.
Who should buy it? Anyone with two audio sources and one pair of headphones, or one source and two output devices, who is tired of crawling behind a desk to swap cables. Streamers, home-office workers, people with a PC and a console sharing one speaker set. Who should skip it? Anyone expecting it to fix a broken jack — it cannot. And anyone who wants automatic or remote switching; this is a manual toggle, and you will press it every time.
• Best for repairing a Nintendo Switch headphone socket → Mustpoint 2x. It is the exact replacement port for that console's game slot board.
• Best for switching between two audio devices → cooidea 3.5mm. Bi-directional 1-in-2-out / 2-in-1-out with a single toggle.
• Best for a no-tools, plug-and-play setup → cooidea 3.5mm. No soldering, no disassembly, no power supply.
• Best if you already own soldering gear and want to save a console → Mustpoint 2x. The skill requirement is the whole barrier.
• Best for headset plugs with a mic → cooidea 3.5mm. Full TS, TRS and TRRS support across CTIA and OMTP wiring.
• Best for silent, hum-free desk audio → cooidea 3.5mm. The low-impedance, full-signal switching design targets ground loop noise.
• Best for portability → cooidea 3.5mm. At 13 grams and roughly 40 x 38 x 10 mm it disappears in a bag.
• Best for a low-effort purchase → cooidea 3.5mm, in my opinion, because it works out of the box with any 3.5mm device, while Mustpoint 2x only makes sense for one specific repair on one specific console.
If I had to pick one for the average reader landing on this page, I would buy the cooidea 3.5mm. It solves a problem most people actually have — too many devices, one set of headphones or speakers — and it does so passively, instantly, and with real attention paid to TRRS compatibility and ground loop noise. The Mustpoint 2x is a genuinely useful part, but it is a narrow tool: it only pays off if you own a Switch with a dead headphone socket and you can solder. Buy the cooidea if you want a switcher. Buy the Mustpoint only if you are fixing that specific console. Check the current price on Amazon before you commit, since both are cheap enough that the wrong pick costs more in hassle than in money.
It is a repair part — a replacement 3.5mm jack socket for the Nintendo Switch. It is not an adapter you plug into anything; it is soldered inside the console to replace a faulty port.
No. It is fully passive. No batteries, no USB power, no drivers or apps. You connect your cables and use the toggle switch to change the audio path.
Yes. It supports four-pole TRRS connectors plus two-pole TS and three-pole TRS, and it covers both CTIA and OMTP wiring, so headset plugs with a mic and inline remote are supported.
No. It only routes an existing audio signal between devices. If a physical socket is damaged, you need a replacement port like the Mustpoint 2x — or a repair service — rather than a switcher.
They are not really competing on value because they do different jobs. In my opinion the cooidea gets more everyday use for more people, while the Mustpoint is worth it only if you are repairing a Switch yourself. Compare the current prices on Amazon for your own situation.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.