Where to Download Multiloader?
There are many versions of Multiloader available on the internet, but the latest one is Multiloader V5.62. You can download it for free from [this link]. The file size is about 10 MB and it is compressed in a ZIP format. You will need to extract it before using it.
How to Use Multiloader?
Before using Multiloader, you will need to prepare some things:
A Samsung phone that is compatible with Multiloader. You can check the list of supported models [here].
A USB cable that can connect your phone to your computer.
A firmware file that matches your phone model and region. You can download it from various sources, such as [SamMobile] or [Samsung Updates].
A backup of your personal data, such as contacts, messages, photos, etc. Flashing your phone will erase all your data.
A fully charged battery or a stable power source.
Once you have everything ready, you can follow these steps to flash your phone with Multiloader:
Run the Multiloader.exe file from the extracted folder.
Select the communication port that you will use to connect your phone. Usually, it is USB.
Select the firmware files that you want to flash. You can either select them manually or use the Auto Select option.
Put your phone in download mode. To do this, turn off your phone and press and hold Volume Down + Home + Power buttons simultaneously until you see a warning screen. Then press Volume Up to confirm.
Connect your phone to your computer using the USB cable. Wait for the drivers to install if needed.
Click on Download button on Multiloader. The flashing process will start and you will see a progress bar on the screen.
Wait for the flashing process to finish. Do not disconnect your phone or interrupt the process in any way.
When the flashing process is done, you will see a green PASS message on the screen. You can disconnect your phone and reboot it.
Congratulations! You have successfully flashed your Samsung phone with Multiloader.
Troubleshooting
If you encounter any problems while using Multiloader, you can try these solutions:
Make sure you have downloaded the correct firmware file for your phone model and region.
Make sure you have installed the correct drivers for your phone on your computer.
Make sure you have selected the correct communication port and firmware files on Multiloader.
Make sure your phone battery is fully charged or connected to a stable power source.
Try using a different USB cable or USB port on your computer.
Try using a different version of Multiloader or a different flashing tool, such as Odin or Z3X.
Conclusion
Multiloader is a useful tool that can flash some Samsung phones with Qualcomm chipsets. It is easy to use and free to download. However, it is not compatible with all Samsung models and it may not work with some firmware files. Therefore, you should always be careful when using it and follow the instructions carefully. Flashing your phone is a risky process that may void your warranty and damage your phone. You should only do it at your own risk and responsibility.
524038ac18