Short section of PVC pipe with one end cap glued on. Vent cowl is loose and the holder is held together by an eye bolt, so it can be hung from a tree or post. Alternatively, you can remove the bolt and peg it to the ground with a tent peg.
The fine mesh on the vent cowl prevents most insects from getting at the bait and the holder is tough enough to withstand chewing from rats and possums.
Bait holders can be spray painted to blend in with the background.
Fujitsu AA low discharge rechargeable NiMH batteries. Min 1900 mAh.
Rechargeable up to 1800 times and will work as low as -20 deg C.
12 position AA/AAA battery charger, with 240V and 12V input.
Security boxes and cable locks
Lockable steel security box and adjustable steel cable locks can be helpful where theft/tampering may be an issue. Multiple cable locks can be keyed alike for ease of use. Please contact us to check availability and suitability for your camera.
Close focus lens
Customised lens and magnetic mount to allow focus ranges less than 1 m. Can be fitted to just about any camera. The magnetic mount means that the lens can easily be removed for normal use. Fitting instructions here.
Tree arm mounts
Custom made arm which can be screwed into trees at height, allowing monitoring of arboreal fauna. Supplied with a bait holder and a close focus lens for the camera you are using. Also can be made for rear mounted cameras eg Reconyx HC600.
I know from experience that these arms will easily take the weight of a Brushtail Possum sitting near the camera. Also Wedgetail Eagles sitting on the arm. Check out some sample photos below.