Five is Better than One. Unlike other LPR providers, we can return up to 5 decoded license plates from one image. We achieve this by utilizing two distinct neural networks. One identifies all the photos of license plates from an image and the other decodes each character of the plate.
Licence Plate Recognition Software 11
Automatic number-plate recognition (ANPR; see also other names below) is a technology that uses optical character recognition on images to read vehicle registration plates to create vehicle location data. It can use existing closed-circuit television, road-rule enforcement cameras, or cameras specifically designed for the task. ANPR is used by police forces around the world for law enforcement purposes, including checking if a vehicle is registered or licensed. It is also used for electronic toll collection on pay-per-use roads and as a method of cataloguing the movements of traffic, for example by highways agencies.
Automatic number-plate recognition can be used to store the images captured by the cameras as well as the text from the license plate, with some configurable to store a photograph of the driver. Systems commonly use infrared lighting to allow the camera to take the picture at any time of day or night.[1][2] ANPR technology must take into account plate variations from place to place.
The software aspect of the system runs on standard home computer hardware and can be linked to other applications or databases. It first uses a series of image manipulation techniques to detect, normalize and enhance the image of the number plate, and then optical character recognition (OCR) to extract the alphanumerics of the license plate. ANPR systems are generally deployed in one of two basic approaches: one allows for the entire process to be performed at the lane location in real-time, and the other transmits all the images from many lanes to a remote computer location and performs the OCR process there at some later point in time. When done at the lane site, the information captured of the plate alphanumeric, date-time, lane identification, and any other information required is completed in approximately 250 milliseconds.[citation needed] This information can easily be transmitted to a remote computer for further processing if necessary, or stored at the lane for later retrieval. In the other arrangement, there are typically large numbers of PCs used in a server farm to handle high workloads, such as those found in the London congestion charge project. Often in such systems, there is a requirement to forward images to the remote server, and this can require larger bandwidth transmission media.
The cameras used can be existing road-rule enforcement or closed-circuit television cameras, as well as mobile units, which are usually attached to vehicles. Some systems use infrared cameras to take a clearer image of the plates.[8][9][10][11][12][13][14][15]
During the 1990s, significant advances in technology took automatic number-plate recognition (ANPR) systems from limited expensive, hard to set up, fixed based applications to simple "point and shoot" mobile ones. This was made possible by the creation of software that ran on cheaper PC based, non-specialist hardware that also no longer needed to be given the pre-defined angles, direction, size and speed in which the plates would be passing the camera's field of view. Further scaled-down components at lower price points led to a record number of deployments by law enforcement agencies globally. Smaller cameras with the ability to read license plates at higher speeds, along with smaller, more durable processors that fit in the trunks of police vehicles, allowed law enforcement officers to patrol daily with the benefit of license plate reading in real time, when they can interdict immediately.
Relative speed is only one issue that affects the camera's ability to read a license plate. Algorithms must be able to compensate for all the variables that can affect the ANPR's ability to produce an accurate read, such as time of day, weather and angles between the cameras and the license plates. A system's illumination wavelengths can also have a direct impact on the resolution and accuracy of a read in these conditions.
Installing ANPR cameras on law enforcement in the vehicles requires careful consideration of the juxtaposition of the cameras to the license plates they are to read. Using the right number of cameras and positioning them accurately for optimal results can prove challenging, given the various missions and environments at hand. Highway patrol requires forward-looking cameras that span multiple lanes and are able to read license plates at high speeds. City patrol needs shorter range, lower focal length cameras for capturing plates on parked cars. Parking lots with perpendicularly parked cars often require a specialized camera with a very short focal length. Most technically advanced systems are flexible and can be configured with a number of cameras ranging from one to four which can easily be repositioned as needed. States with rear-only license plates have an additional challenge since a forward-looking camera is ineffective with oncoming traffic. In this case one camera may be turned backwards.
The complexity of each of these subsections of the program determines the accuracy of the system. During the third phase (normalization), some systems use edge detection techniques to increase the picture difference between the letters and the plate backing. A median filter may also be used to reduce the visual noise on the image.
While some of these problems can be corrected within the software, it is primarily left to the hardware side of the system to work out solutions to these difficulties. Increasing the height of the camera may avoid problems with objects (such as other vehicles) obscuring the plate but introduces and increases other problems, such as adjusting for the increased skew of the plate.
On some cars, tow bars may obscure one or two characters of the license plate. Bikes on bike racks can also obscure the number plate, though in some countries and jurisdictions, such as Victoria, Australia, "bike plates" are supposed to be fitted. Some small-scale systems allow for some errors in the license plate. When used for giving specific vehicles access to a barricaded area, the decision may be made to have an acceptable error rate of one character. This is because the likelihood of an unauthorized car having such a similar license plate is seen as quite small. However, this level of inaccuracy would not be acceptable in most applications of an ANPR system.
At the front end of any ANPR system is the imaging hardware which captures the image of the license plates. The initial image capture forms a critically important part of the ANPR system which, in accordance to the garbage in, garbage out principle of computing, will often determine the overall performance.
License plate capture is typically performed by specialized cameras designed specifically for the task, although new[when?] software techniques are being implemented that support any IP-based surveillance camera and increase the utility of ANPR for perimeter security applications. Factors which pose difficulty for license plate imaging cameras include the speed of the vehicles being recorded, varying level of ambient light, headlight glare and harsh environmental conditions. Most dedicated license plate capture cameras will incorporate infrared illumination in order to solve the problems of lighting and plate reflectivity.
Many countries now use license plates that are retroreflective.[16] This returns the light back to the source and thus improves the contrast of the image. In some countries, the characters on the plate are not reflective, giving a high level of contrast with the reflective background in any lighting conditions. A camera that makes use of active infrared imaging (with a normal colour filter over the lens and an infrared illuminator next to it) benefits greatly from this as the infrared waves are reflected back from the plate. This is only possible on dedicated ANPR cameras, however, and so cameras used for other purposes must rely more heavily on the software capabilities. Further, when a full-colour image is required as well as use of the ANPR-retrieved details, it is necessary to have one infrared-enabled camera and one normal (colour) camera working together.
To avoid blurring it is ideal to have the shutter speed of a dedicated camera set to 1/1000 of a second. It is also important that the camera use a global shutter, as opposed to rolling shutter, to assure that the taken images are distortion-free. Because the car is moving, slower shutter speeds could result in an image which is too blurred to read using the OCR software, especially if the camera is much higher up than the vehicle. In slow-moving traffic, or when the camera is at a lower level and the vehicle is at an angle approaching the camera, the shutter speed does not need to be so fast. Shutter speeds of 1/500 of a second can cope with traffic moving up to 40 mph (64 km/h) and 1/250 of a second up to 5 mph (8 km/h). License plate capture cameras can produce usable images from vehicles traveling at 120 mph (190 km/h).
To maximize the chances of effective license plate capture, installers should carefully consider the positioning of the camera relative to the target capture area. Exceeding threshold angles of incidence between camera lens and license plate will greatly reduce the probability of obtaining usable images due to distortion. Manufacturers have developed tools to help eliminate errors from the physical installation of license plate capture cameras.
Federal, provincial, and municipal police services across Canada use automatic licence plate recognition software; they are also used on certain toll routes and by parking enforcement agencies. Laws governing usage of information thus obtained use of such devices are mandated through various provincial privacy acts.[22]
f3a93f9fa9