How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-26 · 6 min read · Independent comparison
• MIPEACE Adapter — biggest strength: it adds Bluetooth 5.3, a built-in mic and push-button controls to any wired headphones, speaker or car stereo with a 3.5mm jack.
• MIPEACE Adapter — biggest trade-off: it is a receiver only, not a transmitter, and the 3.5mm cable is not included, so you supply your own cord.
• Callez 3.5mm — biggest strength: a purpose-built 152cm replacement cable with a 2.5mm thin jack for a long list of JBL models, built from OFC copper with gold-plated plugs.
• Callez 3.5mm — biggest trade-off: no microphone and no volume control, and it only fits the specific headphone models listed — not Beats, Sony or Sennheiser.
• Who each is for: MIPEACE for anyone going wireless with existing wired gear; Callez for JBL owners whose stock cable broke or went missing.
The MIPEACE Adapter is a tiny wireless audio receiver — model MI-11, black, small enough to sit in your palm and light enough that the battery weighs just 2.9 grams. You plug one end of a 3.5mm aux cable into it and the other end into whatever you want to hear through: non-Bluetooth headphones, a home speaker, or a car stereo aux input. Then you pair your phone to the "Mipeace" ID and wait for the connected voice prompt. That is the whole setup, and it is the reason this little puck exists.
What it does best is give old hardware a second life. Bluetooth 5.3 handles pairing and stability, and the working range is quoted at up to 10 meters (about 32–33 feet) — fine for a room, a desk or a car cabin. Audio output is stereo over the aux jack. The built-in microphone is the part I'd underline: you can answer, hang up or reject calls and control playback with the push button without touching your phone, which matters when you're driving. A triple-press of the MFB button wakes your voice assistant.
Buy it if you have decent wired headphones, a wired speaker or an older car stereo and you want them wireless without buying new gear. Skip it if you need to broadcast audio from a non-Bluetooth device to Bluetooth headphones — this is a receiver only, not a transmitter, and MIPEACE says so twice. Also skip it if you don't own a 3.5mm aux cable, because one isn't in the box; you get the receiver, a USB-C charging cable and a manual. It charges over USB-C and runs on a small 0.44 Wh lithium battery, so plan on routine charging rather than treating it as a plug-in-forever device. Check the current price on Amazon before you commit, since that's the one number this page deliberately leaves to the retailer.
The Callez 3.5mm is not a gadget — it's a cord. Specifically, it's a 2.5mm to 3.5mm aux audio cable, 152cm (just under 5 feet) long, in white, made to replace the detachable cable on a long list of JBL headphones. One end is the thin 2.5mm jack that twists into the headphone cup; the other is a standard 3.5mm plug that goes into your phone, laptop, tablet, or a PS4/PS5/Xbox/Switch controller with a single 3.5mm jack.
The compatibility list is the whole story here, so read it before buying. It covers JBL Tune models (770NC, 760NC, 750BTNC, 720BT, 710BT, 700BT, 670NC, 660NC, 600 BTNC, 570BT, 520BT and more), Live models (770NC, 660NC, 650BTNC, 500BT, 460NC, 400BT), Club 950NC and 700BT, Everest 300/310GA and others, E-series sets like the E55BT and E45BT, plus Tour One and Duet BT. If your headphones aren't on that list, Callez asks you to check with them for a compatibility guide.
Build quality is where this cable earns its place. The outer jacket is TPE, which resists tangling and everyday wear, the plugs are 24K gold-plated straight connectors to fight oxidation, and the conductor is high-purity OFC oxygen-free copper. Callez claims the construction minimizes signal attenuation, and the length gives you room to move at a desk or on a sofa. It also carries a 45-day free replacement and a 2-year warranty.
The trade-offs are real, though. There is no microphone and no volume control on this cable, so you lose inline call and track controls — fine for pure listening, annoying if you take a lot of calls. And it is strictly for the listed JBL models; it is explicitly not for Beats, Sony or Sennheiser. Buy it if you own one of those JBL sets and your original cable is frayed, lost or crackling. Skip it if you need wireless, or if your headphones have a fixed cable rather than a detachable one.
• Best for going wireless with wired headphones → MIPEACE Adapter. It converts a 3.5mm jack into a Bluetooth receiver with mic and controls.
• Best for a broken JBL cable → Callez 3.5mm. It's a direct physical replacement with the correct 2.5mm thin jack.
• Best for hands-free calls while driving → MIPEACE Adapter. The built-in mic and push-button call control are the point of the device.
• Best for pure sound with no controls in the way → Callez 3.5mm. No mic, no volume buttons, just cable.
• Best for older car stereos and wired speakers → MIPEACE Adapter. Aux-in plus Bluetooth 5.3 at up to roughly 32 feet of range.
• Best for durability against daily twisting and pulling → Callez 3.5mm. TPE jacket, OFC copper and gold-plated plugs are built for that abuse.
• Best for the widest device compatibility → Callez 3.5mm. The 3.5mm end fits phones, laptops, tablets and most controllers.
• Biggest gotcha to check first → MIPEACE needs its own aux cable and is receiver-only; Callez only fits the listed JBL models.
In my opinion, most people searching this comparison should buy the MIPEACE Adapter. It solves the more common and more interesting problem — making wired headphones, speakers and car stereos wireless with working call controls — and Bluetooth 5.3 with a built-in mic covers daily use well. I'd only steer you to the Callez 3.5mm if you own one of the listed JBL headphones and simply need a reliable replacement cord, in which case its materials and warranty make it the sensible pick. Buy the MIPEACE if you want new capability; buy the Callez if you want to restore what you already had.
FAQ
how to make aux cable with headphones
You don't need to build anything. Plug a standard 3.5mm aux cable into the MIPEACE Adapter's jack and the other end into your wired headphones, then pair your phone to the "Mipeace" Bluetooth ID. Note that the MIPEACE does not include a 3.5mm cable, so you'll need to own one.
Use a Bluetooth receiver like the MIPEACE Adapter. It takes the audio from your phone wirelessly over Bluetooth 5.3 and outputs it through its 3.5mm aux jack into your wired headphones. The adapter is a receiver only, so it won't transmit audio the other direction.
how do i connect my wired headphones to my phone
If your phone has a 3.5mm jack or a suitable adapter, the Callez 3.5mm cable connects straight in. If it doesn't, pair the MIPEACE Adapter to your phone over Bluetooth and run a 3.5mm aux cable from the adapter to your headphones. Either way it's plug-and-play once the right pieces are in place.
No. It's built for the specific JBL models listed, using a 2.5mm thin jack on the headphone end, and Callez states it does not fit Beats, Sony or Sennheiser headphones. If your model isn't on the list, confirm compatibility before ordering.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SONRU 5.3 vs Isobel Ultimate: Bluetooth Headphones for, LWZCAM Earbud 5 vs KVIDIO Headphones: Stereo Headphones, open ear tws earbuds, Sony WH-CH520 vs Cyberix Open Ear