How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-01 · 7 min read · Independent comparison
• MFLDSFLHM's biggest strength: It solves two hardware faults at once — a dead headphone jack and a game card reader that won't read, eject, or reload games — with a single replacement assembly for the original Switch (HAC-001).
• MFLDSFLHM's biggest trade-off: It fits only the HAC-001 model. It does not fit Switch Lite (HDH-001) or Switch OLED (HEG-001), and the install is a genuine repair job that calls for experience.
• Cubilux's biggest strength: A passive, no-power, no-software toggle that flips audio between two sources or two outputs instantly, with an aluminum body and two shielded 3-foot cables included.
• Cubilux's biggest trade-off: It's a switch, not a repair. It won't fix a broken jack, and it's designed primarily for headphone switching — powered speakers can hum when deselected because of the passive circuit.
• Who MFLDSFLHM is for: Original Switch owners who are comfortable opening their console and transferring parts from the old unit.
• Who Cubilux is for: Anyone juggling a PC, a console, and one pair of headphones at a desk, or two headsets on one machine.
This is a replacement part, not an accessory. The MFLDSFLHM Switch Game Card bundles a game card reader slot and a headphone jack port into one assembly built for the Nintendo Switch HAC-001 — the original model, not the Lite and not the OLED. If your Switch has stopped producing sound through the headphone jack, or the card slot has started behaving badly (games not detected, cards that won't eject or insert cleanly, games that need re-loading), this is the kind of part you'd swap in to address those symptoms at the hardware level.
Who should skip it: Switch Lite owners, Switch OLED owners, anyone who has never opened a console, and anyone whose actual problem is a software or settings issue rather than dead hardware. If you're not sure which model you own, check the model number on the back of the unit before you buy anything. In my opinion, this part makes sense for a confident DIY repairer with an aging launch-model Switch who'd rather repair than replace — not for a first-timer.
Cubilux 3.5mm: Who It's For
The Cubilux 3.5mm Audio Selector is a different category of product entirely: a passive 3.5mm A/B switch box. It's bidirectional, which means it works two ways — two inputs to one output (share one pair of headphones between two devices) or one input to two outputs (route one source to two pairs of headphones). You flip the mechanical toggle left for the left port and right for the right, and the switch position tells you which channel is live. No power adapter, no drivers, no software.
The build is a full aluminum enclosure with an anti-slip pad on the bottom, and it measures just 1.65 x 1.14 x 0.51 inches — genuinely pocket-sized for a desk or a bag. Two 3-foot 3.5mm TRS shielded audio cables come in the box, so it works the moment you unbox it. That's the appeal: a PC on one port, a console on the other, one headset, and a physical flip instead of crawling behind the desk to swap plugs.
Two caveats matter. First, the manufacturer notes it's aimed at headphone switching: when you connect powered speakers and deselect them, the speaker input floats and sensitive powered speakers can pick up a hum. That's a trait of passive switching, not a defect. Second, if you want to switch a TRRS headset with a microphone, you'll need TRRS-to-TRRS cables, which aren't included — and mixing TRS and TRRS can make a computer favor the TRS signal. Skip it if your goal is repairing a console, or if your setup is speaker-centric rather than headphone-centric.
Side-by-Side: Which Should You Choose?
• Broken headphone jack on an original Switch → MFLDSFLHM Switch Game Card. It's the only one of the two that replaces hardware.
• Game card reader not detecting or ejecting cards → MFLDSFLHM Switch Game Card. The assembly covers both faults in one part.
• One headset shared between a PC and a console → Cubilux 3.5mm. Two inputs, one output, one toggle.
• Two headsets on one machine → Cubilux 3.5mm. Flip it into one-input-two-output mode.
• No tools, no install, works out of the box → Cubilux 3.5mm. Passive design, two cables included, nothing to configure.
• Comfortable opening a console and transferring parts → MFLDSFLHM Switch Game Card. Pry tools and screwdrivers are in the pack.
• Speaker setups where hum would bother you → lean toward a headphone-focused use case for Cubilux. The passive floating input is the reason.
I'd buy the Cubilux 3.5mm for most people reading this. It's a zero-risk purchase: no install, no model compatibility trap, no experience required, and it directly solves the everyday annoyance of swapping headphone plugs between devices. You plug it in and flip a switch.
I'd only steer you to the MFLDSFLHM Switch Game Card if you own an original HAC-001 Switch, the jack or card reader has actually failed, and you're genuinely comfortable doing the repair. It's a capable part for the right hands — but it's the wrong tool for everyone else. Check the current price on Amazon before deciding, and confirm your Switch model number first.
how to switch headphones between devices
If both devices have a 3.5mm output, the Cubilux selector is the simplest answer: run each device into one of its two input ports, plug your headphones into the output, and flip the toggle. In one-input-two-output mode it does the reverse, sending one source to two pairs of headphones. No power or software is involved.
how to switch headphones left right
That's a channel-balance question, not a switcher question — the Cubilux toggle's left/right positions select which port is active, not which ear you hear. For swapping left and right audio, use your device's audio settings or a cable adapter instead. The selector is about routing between ports, not reversing stereo channels.
how to switch headphones to headset windows 11
A TRRS headset with a mic needs TRRS-to-TRRS cables with the Cubilux selector, since the included cables are TRS. The selector can pass TRRS signals, including microphone input, but mixing TRS and TRRS can make Windows prioritize the TRS signal. Check your cable type before you rely on it for mic passthrough.
how to switch headphones to speakers on computer
You can connect speakers to one Cubilux port and headphones to the other, but note the manufacturer's warning: when powered speakers are deselected, their input floats and sensitive speakers may hum. The selector is primarily built for headphone switching, so a speaker-plus-headphone setup can work but isn't its ideal use case.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SAMSON SR450 vs Amazon Renewed Beats Solo 4, PODERIX PDBEAM vs SOAR NFL Active Noise: Large Over Ear, FIFINE N6 vs Kissesuu Custom Earphones Metal, PALOVUE Lightning Headphones Earphones vs XIAOWTEK Earbuds