How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to add a working 3.5mm headset jack to a Windows PC that doesn't have one, choose MCSPER USB; if you need to replace the worn or broken cable on a specific Sennheiser-style gaming headset, choose Naroote Gaming Headphone Cable.
• MCSPER USB biggest strength: It's a plug-and-play USB-A to 3.5mm TRRS adapter with a DAC chip, so you can connect a headset with a single combined mic/audio plug to a desktop, laptop or PS4 that has no dedicated audio jack.
• MCSPER USB biggest trade-off: It only works one direction (USB to 3.5mm), doesn't support headsets with separate headphone and mic plugs, and adds no in-line controls.
• Naroote Gaming Headphone Cable biggest strength: It's a small, lightweight oxygen-copper replacement cable built specifically for G4ME ONE, PC 373D, PC37X, GSP350/500/600-style headsets, giving a tired headset a second life.
• Naroote Gaming Headphone Cable biggest trade-off: It only fits that narrow family of headsets and does nothing for a PC that lacks a 3.5mm port in the first place.
• Who each pick is for: Pick MCSPER USB if your problem is your PC's missing audio jack; pick Naroote if your problem is a damaged cable on a compatible gaming headset.
MCSPER USB is, at heart, a tiny external sound card. You plug the USB-A end into your computer, and the 3.5mm TRRS port on the other end becomes a fresh combined headphone-and-microphone jack. That matters on Windows PCs where the front-panel jack is dead, noisy, or simply not there — thin laptops and mini desktops are the usual offenders. Because it needs no drivers, no apps and no external power, Windows 10/8.1/8/7/Vista/XP picks it up automatically in seconds. It's also compatible with Mac OS X, Linux, Chromebooks, Surface Pro 3, Raspberry Pi and PS4.
The audio side is more serious than the size suggests. MCSPER lists an advanced DAC smart chip, a maximum sample rate of 48 kHz, a 120 dB signal-to-noise ratio and 5.1 stereo surround output. In practice that points to clean, quiet playback with the kind of noise reduction that helps when your motherboard audio is hissy. The metal casing, braided cord and strain relief rated for 12,000+ bends suggest it's built to survive life in a bag pocket on the way to the office or a conference room. You can also run it as a second sound source so speakers and headphones can both operate.
Naroote Gaming Headphone Cable: Who It's For
The Naroote Gaming Headphone Cable solves a completely different problem. This is a replacement audio upgrade cable, and its whole reason to exist is compatibility with a specific group of headsets: G4ME ONE, ZERO, PC 373D, PC37X and GSP350/500/600 models. If you own one of those and the stock cable has frayed, developed a crackle, or lost a channel, this is the part that puts the headset back in service instead of pushing you toward a whole new one. Naroote describes it as an affordable cable that gives a great-sounding headset a new life, and that framing is accurate — it's a repair part, not a gadget.
Physically it's small, light and round in shape, with a tangle-free design and a male-to-male 3-pin auxiliary connector. Naroote says the terminals and sockets overlap precisely to help audio performance, and the conductor is imported oxygen-copper wire, chosen so the signal paths don't interfere with each other in a way that muddies the sound. Rated for indoor and outdoor use, it's the kind of cable you can coil loosely in a headset case and forget about until you need it. Naroote also notes a straightforward after-sales channel if something is wrong when it arrives.
Buy Naroote if you already own one of the listed headsets and only the cable is the problem. Skip it if your headset isn't on that compatibility list — the fit is the entire point here, and a cable that doesn't seat properly is worse than useless. Skip it, too, if your actual issue is that your Windows PC has no 3.5mm jack at all; this cable terminates in an aux connector and assumes a jack already exists somewhere in your chain.
Side-by-Side: Which Should You Choose?
• Best for a PC with no 3.5mm port → MCSPER USB. It creates the jack you're missing.
• Best for reviving a compatible headset → Naroote Gaming Headphone Cable. It's a direct replacement for the listed models.
• Best for plug-and-play setup on Windows → MCSPER USB. No drivers, no apps, recognized automatically.
• Best for a single-plug CTIA headset with a mic → MCSPER USB. It carries both listening and speaking on one TRRS port.
• Best for audio cleanliness on a noisy desktop → MCSPER USB. The DAC chip, 120 dB SNR and noise reduction are aimed at exactly that.
• Best for two separate 3.5mm plugs → neither. MCSPER USB explicitly doesn't support split headphone/mic plugs, and Naroote is a headset replacement cable.
• Best for PS4 external audio → MCSPER USB. It supports PS4 for listening output (but not PS3).
In my opinion, most people searching this comparison are really asking one question: how do I get sound out of my Windows PC? For that, I'd buy MCSPER USB. It's the more broadly useful of the two, because it fixes a hardware gap rather than fitting one narrow headset family, and its DAC chip, 48 kHz sample rate and 120 dB SNR give it a real audio story on top of the convenience. I'd only choose Naroote if I already owned one of the compatible headsets and my cable was the failure point. Check the current price on Amazon before deciding — the button on this page will show it.
how to connect headphones to windows pc
If your PC has a 3.5mm jack, plug a single-plug CTIA headset straight in. If it doesn't, plug MCSPER USB into a free USB-A port and connect the headset to the adapter's 3.5mm TRRS port — Windows recognizes it automatically with no drivers.
how to connect headphones to pc windows 10
Windows 10 supports MCSPER USB out of the box, so the adapter is detected within seconds of plugging it in. Then set it as your playback device in Windows sound settings. For Naroote, no setup is needed at all — it's a straight cable swap on a compatible headset.
how can i connect my headphones to my pc
Match the connector to the port. A combined TRRS plug plus a missing PC jack calls for MCSPER USB. A compatible G4ME ONE, PC 373D, PC37X or GSP350/500/600 headset with a bad cable calls for Naroote Gaming Headphone Cable.
how to use headphones on pc
Once connected, audio should route automatically. On MCSPER USB, note that audio only travels from the USB end to the 3.5mm end, there's no in-line volume or play/pause control, and Apple, Beats or Bose headphones won't pass mic input through it.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: AIYIMA DAC-A2 vs CVJ Shadow Blade IEM: PC Gaming Headphones, Callez Sony Headphones Replacement vs esbeecables USB C, BSTiltion TV Headphone vs AMONIDA Headphones