How to use the marble polishing powder for Indian floors?

Having your marble professionally polished is fantastic but it can be expensive. The results are magnificent in most cases, but when not done right, can cause more damage. The polishing processes incorporates specialised marble polishing powder, chemicals, diamond pads and machinery.

The floor polishing process can take hours and cause issues while performing. Grinding, Honing and then polishing the floors will ensure a mirror shine result, but what about the density?

The Novamarmol powder densifies and adds shine:

Regularly performing the polishing process can weaken the foundation of the floor. As the diamond pads are crushing through the layer of scratches and dirt.

As the marble floor loses its density, the very motive behind getting this thick and beautiful stone is lost. Hence, after performing the polishing process, its is essential to densify it.

You might be on a strict budget or you want to lengthen the time interval between professional restoration services. Maybe the marble floor is looking a little dull and tired, and needs a lift. Just buffing the floor is not getting any improvement in the look of the floor anymore.

The reason the Novamarmol polishing powder is a success in getting the marble floors to shine and densify, it changes the chemical composition of the floor. As this chemical reaction takes place, the floor starts to densify.

So, the next time, you wish to perform the floor polishing process. The diamond pads will crush through and remove this densified and chemically changed layer. This will safeguard the shined marble floor underneath and the polishing process will be performed on the newly added layer alone.

How to use the Novamarmol Powder:

1. Preparation - Remove all dry dust, grit, sand, dirt, etc from the surface via a powerful dry vacuuming. Remove any other foreign material they may cause scratching in the agitation process.

2. Mix 2 parts Novamarmol marble polishing powder with 1 part water.

3. The novamarmol powder is applied using neutral supports, such as white, red or natural fiber disc that prevents the marble from yellowing.

5. Scrub the product with a standard floor scrubbing machine with 140 rpm or 400 rpm with skirt.

6. Add more water if the slurry is too thick or drying out too quickly, or more powder if the slurry is too thin, like water. You want the slurry to be wet/thin, the consistency of a milkshake.

7. Remove the slurry with a powerful wet vacuum.

The floor will ready for use after this step.

The Novamarmol powder crystallizes all the stones, and calcareous marbles, hardening the surface obtaining a very crystal clear, resistant, nonslip and easily washable shine.

Using the marble polishing powder for a regular polishing regime can help in maintaining the marble floors with shine for the longest period of time.

To shop the marble polishing powder:

https://www.amazon.in/dp/B08BM6XRX9

or enquire: Visit http://floorcareco.in/novamarmol-powder.php