Embedded Files
General Info
General Info
Shop Rate: $100 per Hour (For all Custom Gunsmithing and services not listed)
Shop Rate: $100 per Hour (For all Custom Gunsmithing and services not listed)
Minimum Charge Per Firearm: $50 (No exceptions)
Minimum Charge Per Firearm: $50 (No exceptions)
TYPICAL COMPLETION TIMES
TYPICAL COMPLETION TIMES
(Prone to Change Depending on Current Work Load)
(Prone to Change Depending on Current Work Load)
Professional Cleaning Services: 5-10 Business Days
Professional Cleaning Services: 5-10 Business Days
Warranty Returns: 4-10 Weeks
Warranty Returns: 4-10 Weeks
Sight Installation: 2-5 Business Days
Sight Installation: 2-5 Business Days
General Repairs: 4-6 Weeks (Parts Dependant)
General Repairs: 4-6 Weeks (Parts Dependant)
CONDITIONS & EXCLUSIONS
CONDITIONS & EXCLUSIONS
We reserve the right to refuse any job at any time for any reason
We reserve the right to refuse any job at any time for any reason
We reserve the right to refuse any work we decide would render a firearm unsafe
We reserve the right to refuse any work we decide would render a firearm unsafe
All Class lll Firearms ABSOLUTELY MUST have a copy of the proper paperwork included with it
All Class lll Firearms ABSOLUTELY MUST have a copy of the proper paperwork included with it
We DO NOT work on or clean any AIR Pistols or Rifles, Paintball Guns, or any replicas
We DO NOT work on or clean any AIR Pistols or Rifles, Paintball Guns, or any replicas
If there is a need for specialized work, we reserve the right to ship the firearm to another manufacturer for work (This may incur additional shipping and handling charges)
If there is a need for specialized work, we reserve the right to ship the firearm to another manufacturer for work (This may incur additional shipping and handling charges)
If warranty work is required, we reserve the right to ship to the manufacturer (Which may incur additional shipping & handling charges)
If warranty work is required, we reserve the right to ship to the manufacturer (Which may incur additional shipping & handling charges)
If there is a need for test firing, we ALWAYS use factory-loaded ammo. We DO NOT use handloads or Mil-Surp ammo
If there is a need for test firing, we ALWAYS use factory-loaded ammo. We DO NOT use handloads or Mil-Surp ammo
WE DO NOT REMOVE OR DEACTIVATE SAFETIES FOR ANYONE, EVER
WE DO NOT REMOVE OR DEACTIVATE SAFETIES FOR ANYONE, EVER
(Starting At)
(Starting At)
SERVICES
SERVICES
(Starting At) (Part/Finishing/Ammo Not included)
MINIMUM Machine work fee $50
Assemble your AR Upper (parts not included in cost) $50
Assemble your AR Lower (parts not included in cost) $70
Safety Inspection/Function check (no test fire) $40
Safety Inspection/Function check Class III $70
or .50Cal (no test fire)
Safety Inspection/Function check w/Test Fire $50
(Class III & .50 cal’s excluded)
Professional Cleaning: Strip, clean, inspect, oil, reassemble $50
Professional Cleaning: Rusted HEAVILY SHOP RATE
(Minimum $150 Cost)
Professional Cleaning: Class III, .50Cals, ARs with $100
Multiple Accessories, rusted guns, dbl-barrel’s
Test Fire- Function, No sight in $40
Test Fire- Function, Machine Gun $60
Test Fire- Function & 25 yd Sight in $50
Non-Firing BORE Sighting (Collimator ONLY) $40
Remove Stuck Bullet or Case $40
Broken Screw Removal/per $40
Re-Assemble Gun from Parts (If Complete) $75
Minimum/Starting At:
Warranty Return to Manufacturer (Not including S&H) $50
Full AK Build (YOUR PARTS, Includes $400
Disassem/Reassem, No Cerakote or finish included)
Full AK Cerakote Finish (Solid Color) $350
*Pro-rated to $200 if done at time of Build
Pistol Build- “Full Boat LRK” $5K-6K+
(Machine Work to bring Parts to our standads)
HANDGUN SERVICES
HANDGUN SERVICES
(Starting At)
(Starting At)
TRIGGER TUNE-UPS
TRIGGER TUNE-UPS
(Starting At) (Part/Finishing/Ammo Not included)
(Starting At) (Part/Finishing/Ammo Not included)
Glock-Smooth Trigger action only $60
Glock-Smooth Trigger action only $60
(Does not change trigger pull weight)
(Does not change trigger pull weight)
Glock- Install new connector (Not including part cost) $40
Glock- Install new connector (Not including part cost) $40
Glock- Install connector w/ over-travel stop $50
Glock- Install connector w/ over-travel stop $50
(parts not included in cost)
(parts not included in cost)
Springfield XD- Smooth action only $75
Springfield XD- Smooth action only $75
(Does not change take up, release over-travel)
(Does not change take up, release over-travel)
Springfield XD- Install Trigger kit, $75
Springfield XD- Install Trigger kit, $75
duty or carry use (parts not included)
duty or carry use (parts not included)
Springfield XD- Install Trigger kit, $125
Springfield XD- Install Trigger kit, $125
Competition Only (parts not included)
Competition Only (parts not included)
S$W M&P- Install Trigger kit (parts not included) $75
S$W M&P- Install Trigger kit (parts not included) $75
Install Trigger kit(Glock, Springfield, $40
Install Trigger kit(Glock, Springfield, $40
1911, S&W, parts not included)
1911, S&W, parts not included)
1911, Sig Sauer, or Browning HP Action/Reliability Job $125
1911, Sig Sauer, or Browning HP Action/Reliability Job $125
HK- Install Trigger Spring kit (parts not included) $75
HK- Install Trigger Spring kit (parts not included) $75
HK- Install LEM Trigger (parts not included) $75
HK- Install LEM Trigger (parts not included) $75
SIGHT INSTALLATION
SIGHT INSTALLATION
(Starting At) (Part/Finishing/Ammo Not included)
(Starting At) (Part/Finishing/Ammo Not included)
(ALL Prices reflect standard sight work, additional costs may be incurred for “problem sights”)
(ALL Prices reflect standard sight work, additional costs may be incurred for “problem sights”)
Mill Glock for RMR $150
Mill Glock for RMR $150
Install Factory Sights (Purchased Here) $50
Install Factory Sights (Purchased Here) $50
Install Factory Sights (NOT Purchased Here) $50
Install Factory Sights (NOT Purchased Here) $50
Install STAKE ON Front Sight (Non- Tritium) $70
Install STAKE ON Front Sight (Non- Tritium) $70
Additional Cost to mill out sight (IF NEEDED)
Additional Cost to mill out sight (IF NEEDED)
Machine Slide for Front Dovetail Fit $70
Machine Slide for Front Dovetail Fit $70
Machine Slide for NOVAK or Heinnie Rear $125
Machine Slide for NOVAK or Heinnie Rear $125
Machine Slide for BO-MAR Rear Sight $160
Machine Slide for BO-MAR Rear Sight $160
Install Pinned Revolver Front Sight $50
Install Pinned Revolver Front Sight $50
Install Revolver Adjustable Rear Sight Blade $50
Install Revolver Adjustable Rear Sight Blade $50
(Part Included)
(Part Included)
Drill/Tap Sight Base Hole (Per Hole) $40
Drill/Tap Sight Base Hole (Per Hole) $40
Pin/Weld Front Sight $150
Pin/Weld Front Sight $150
PISTOL SAFETIES
PISTOL SAFETIES
(Starting At) (Part/Finishing/Ammo Not included)
(Starting At) (Part/Finishing/Ammo Not included)
Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or $125
Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or $125
Wilson Type, safety & frame fitting req’d (refinish incld)_
Wilson Type, safety & frame fitting req’d (refinish incld)_
Install Drop-In Beavertail Grip Safety $50
Install Drop-In Beavertail Grip Safety $50
Install Standard 1911 Thumb Safety $50
Install Standard 1911 Thumb Safety $50
Install 1911 Ambi-Thumb Safety $70
Install 1911 Ambi-Thumb Safety $70
(No modifications required)
(No modifications required)
Install 1911 Ambi-Thumb Safety $90
Install 1911 Ambi-Thumb Safety $90
(If modification is required)
(If modification is required)
Install Browning Extended Ambi-Thumb Safety $65
Install Browning Extended Ambi-Thumb Safety $65
HAMMER & TRIGGERS
HAMMER & TRIGGERS
(Starting At) (Part/Finishing/Ammo Not included)
(Starting At) (Part/Finishing/Ammo Not included)
Install 1911 Style Match Trigger $50
Install 1911 Style Match Trigger $50
(Action Job Not Included)
(Action Job Not Included)
Hammer “Bob” Service $50
Hammer “Bob” Service $50
(Remove Hammer Spur, Semi-Autos)
(Remove Hammer Spur, Semi-Autos)
Install Match Sear (Action Job Not Included) $50
Install Match Sear (Action Job Not Included) $50
Install Hammer (Drop-In, Action Job Not Included) $50
Install Hammer (Drop-In, Action Job Not Included) $50
BARRELS, BUSHINGS, GUIDE RODS
BARRELS, BUSHINGS, GUIDE RODS
(Starting At) (Part/Finishing Not included)
(Starting At) (Part/Finishing Not included)
Thread Barrel for Suppressor * $150+
Thread Barrel for Suppressor * $150+
(Surcharge for Metric, L. Hand, & Non-Standard TPI)
(Surcharge for Metric, L. Hand, & Non-Standard TPI)
(*Thread Protector Not Included with Barrel Threading)
(*Thread Protector Not Included with Barrel Threading)
Ruger .22 BBL Package $200+
Ruger .22 BBL Package $200+
(Cut/Thread, Relocate Front Sight, Bull BBL Only)
(Cut/Thread, Relocate Front Sight, Bull BBL Only)
Cut Barrel, Face, Cut Crown (Sight Install Not Included) $100
Cut Barrel, Face, Cut Crown (Sight Install Not Included) $100
RE-Crown Barrel $50
RE-Crown Barrel $50
Throat Barrel & Polish Feed Ramp $75
Throat Barrel & Polish Feed Ramp $75
Install & Chamber Match Grade BBL $150
Install & Chamber Match Grade BBL $150
& Matching Bushing 1911
& Matching Bushing 1911
Install & Chamber Match Grade BBL $100
Install & Chamber Match Grade BBL $100
(1911 Bull BBL, Glock, Browning)
(1911 Bull BBL, Glock, Browning)
Install Drop-In Barrel $50
Install Drop-In Barrel $50
(some fit req’d, bushing fit not included)
(some fit req’d, bushing fit not included)
Install Solid Match Barrel Bushing $75
Install Solid Match Barrel Bushing $75
PISTOL SLIDES
PISTOL SLIDES
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Add Front Serrations (Match Rear Serrations) $150
Add Front Serrations (Match Rear Serrations) $150
Lower/Flair Ejection Port (Re-Finish Not Included) $70
Lower/Flair Ejection Port (Re-Finish Not Included) $70
Tune Extractor (Re-Finish Not Included) $40+
Tune Extractor (Re-Finish Not Included) $40+
Polish Breech Face (Re-Finish Not Included) $40
Polish Breech Face (Re-Finish Not Included) $40
Fit New Slide to Frame (Barrel Fitting Not Included) $80
Fit New Slide to Frame (Barrel Fitting Not Included) $80
PISTOL FRAMES
PISTOL FRAMES
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Bevel Mag Well $75
Bevel Mag Well $75
Install/Blend Smith-Alexander 1911 Mag Well $100
Install/Blend Smith-Alexander 1911 Mag Well $100
(Re-Finish Not Included)
(Re-Finish Not Included)
Install Ejector $50
Install Ejector $50
Install Mag Catch $30
Install Mag Catch $30
Install Slide Stop (with added detent) $50
Install Slide Stop (with added detent) $50
Stake Plunger Tube $60
Stake Plunger Tube $60
Stake Grip Bushings (Per Hole) $30
Stake Grip Bushings (Per Hole) $30
Drill/Tap Frame For Grip Bushings $40
Drill/Tap Frame For Grip Bushings $40
(Per Hole)(Plus Set-Up Fee)
(Per Hole)(Plus Set-Up Fee)
Install Grip Bushings $30
Install Grip Bushings $30
(Standard, Slim, Oversize, EACH)
(Standard, Slim, Oversize, EACH)
Install Mainspring Housing (If Fitting Req’d) $50
Install Mainspring Housing (If Fitting Req’d) $50
REVOLVER WORK
REVOLVER WORK
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Action Job (Smooth action, tune internal parts, $150
Action Job (Smooth action, tune internal parts, $150
Single or Double Action, Spring Kit Included )
Single or Double Action, Spring Kit Included )
Polish Chambers (For Improved Extraction) $50
Polish Chambers (For Improved Extraction) $50
Re-crown Barrel $50
Re-crown Barrel $50
Re-Cut Forcing Cone $50
Re-Cut Forcing Cone $50
Bob Hammer & Polish (D/A Only Conversion) $100
Bob Hammer & Polish (D/A Only Conversion) $100
Round, Radius, & Polish Trigger Face $80
Round, Radius, & Polish Trigger Face $80
Correct Timing (S&W Only) $130
Correct Timing (S&W Only) $130
Remove End Shake (Cylinder Play) $90
Remove End Shake (Cylinder Play) $90
Replace S&W Rear Sight Blade (Part Not Included) $40
Replace S&W Rear Sight Blade (Part Not Included) $40
Set Barrel Back 1 Turn, Adjust $200
Set Barrel Back 1 Turn, Adjust $200
BBL/Cylinder Gap, Re-Cut Forcing Cone
BBL/Cylinder Gap, Re-Cut Forcing Cone
Re-Time Colt D/As(Starting At) $200
Re-Time Colt D/As(Starting At) $200
RIFLE SERVICES
RIFLE SERVICES
(Starting At)
(Starting At)
RIFLE BARRELING WORK
RIFLE BARRELING WORK
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Cut and Crown Barrel(Must submit Form-4 beforehand, $100
Cut and Crown Barrel(Must submit Form-4 beforehand, $100
if its an SBR conversion)
if its an SBR conversion)
Re-Crown Barrel $50
Re-Crown Barrel $50
Thread Barrel for Suppressor
Thread Barrel for Suppressor
(Surcharge for Metric, L. Hand, and Non-Standard TPI’s) $150
(Surcharge for Metric, L. Hand, and Non-Standard TPI’s) $150
Thread AK Barrel
Thread AK Barrel
Thread AK Barrel, Move Front Sight, $300
Thread AK Barrel, Move Front Sight, $300
Thread/Pin Brake (See Above)
Thread/Pin Brake (See Above)
Thread Barrel for Muzzle Brake $150
Thread Barrel for Muzzle Brake $150
or Suppressor(Standard TPI)
or Suppressor(Standard TPI)
Thread Barrel for Muzzle Brake or Suppressor $250
Thread Barrel for Muzzle Brake or Suppressor $250
w/ Custom “Invisible” Thread Protector
w/ Custom “Invisible” Thread Protector
Fit New Barrel To AR15 (Including Removal $100
Fit New Barrel To AR15 (Including Removal $100
/Refit of HGs and Gas Block)
/Refit of HGs and Gas Block)
Fit New Gas Block to AR15 (w/ Taper Pin Mounts) $100
Fit New Gas Block to AR15 (w/ Taper Pin Mounts) $100
Permanently Affix Flash Hider (Drill & Pin) $100
Permanently Affix Flash Hider (Drill & Pin) $100
Remove Permanently Affix Flash Hider (Drill & Pin) $100
Remove Permanently Affix Flash Hider (Drill & Pin) $100
Remove/ReInstall Flash Hider or Muzzle Brake $40
Remove/ReInstall Flash Hider or Muzzle Brake $40
Cut, Crown, Thread, and Pin Muzzle $250
Cut, Crown, Thread, and Pin Muzzle $250
Device at 16 Inch Overall Length
Device at 16 Inch Overall Length
BOLT SERVICES
BOLT SERVICES
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Install SAKO or M16 Extractor in Remington 700 Bolt $200
Install SAKO or M16 Extractor in Remington 700 Bolt $200
Install Tac Bolt Knob(Rem700 or Win70, $140
Install Tac Bolt Knob(Rem700 or Win70, $140
Bolt Knob Not Included)
Bolt Knob Not Included)
Check Headspace $40
Check Headspace $40
Re-Build AR15 Bolt(Gas Rings and Firing $50
Re-Build AR15 Bolt(Gas Rings and Firing $50
Pin Retainer Not Included)
Pin Retainer Not Included)
Fit AR15 Gas Key, Seal Stake Screws $50
Fit AR15 Gas Key, Seal Stake Screws $50
HK SPECIFIC SERVICES
HK SPECIFIC SERVICES
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Install Tri-Lug or Other Suppressor Adapter $200
Install Tri-Lug or Other Suppressor Adapter $200
(Adapter Not Included)
(Adapter Not Included)
Install Paddle Mag Catch (Parts/Re-Finish Not Included) $200
Install Paddle Mag Catch (Parts/Re-Finish Not Included) $200
TRIGGER TUNING
TRIGGER TUNING
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Trigger Job/Action Job, most rifles $140
Trigger Job/Action Job, most rifles $140
Trigger Tuning Job, FNAR rifle $140
Trigger Tuning Job, FNAR rifle $140
Install & Adjust Aftermarket Trigger (Trigger not included)$60
Install & Adjust Aftermarket Trigger (Trigger not included)$60
STOCK FITTING
STOCK FITTING
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Complete Bed With Aluminum Pillars, Free-Float Barrel $275
Complete Bed With Aluminum Pillars, Free-Float Barrel $275
Channel (Most Fiberglass Stocks)
Channel (Most Fiberglass Stocks)
Complete Bed W/O Aluminum Pillars, $240
Complete Bed W/O Aluminum Pillars, $240
Free-Float Barrel Channel (Most Fiberglass Stocks)
Free-Float Barrel Channel (Most Fiberglass Stocks)
Install Recoil Pad $75
Install Recoil Pad $75
(Synthetic Stock ad Recoil Pad Not Included)
(Synthetic Stock ad Recoil Pad Not Included)
Install Recoil Pad $100
Install Recoil Pad $100
(Synthetic Stock ad Recoil Pad Not Included)
(Synthetic Stock ad Recoil Pad Not Included)
Install Sling Swivel Stud (EACH, Parts Not Included) $30
Install Sling Swivel Stud (EACH, Parts Not Included) $30
Install AR Stock or Handguard $30
Install AR Stock or Handguard $30
Install AR Handguard (If Gas Block Has To be Removed) $60
Install AR Handguard (If Gas Block Has To be Removed) $60
Install AR Sling Plate $40
Install AR Sling Plate $40
Free Float HG Install (Starting At) $100
Free Float HG Install (Starting At) $100
SIGHTS
SIGHTS
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes) $40/hole
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes) $40/hole
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge) $40/hole
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge) $40/hole
Mount and Bore Sight Scope, Laser Boresighted $40
Mount and Bore Sight Scope, Laser Boresighted $40
(More if base needs machining)
(More if base needs machining)
Bore Sight Customer Mounted Optics (Collimator Only) $40
Bore Sight Customer Mounted Optics (Collimator Only) $40
Install Picatinney Scope Rail $35-$150
Install Picatinney Scope Rail $35-$150
(No Drill/Tap Req’d, If Machining is req’d, costs extra)
(No Drill/Tap Req’d, If Machining is req’d, costs extra)
Fit Taper Pins for AR15 A-Frame F.S. on New Barrel $150
Fit Taper Pins for AR15 A-Frame F.S. on New Barrel $150
SHOTGUN SERVICES
SHOTGUN SERVICES
(Starting At)
(Starting At)
BARRELING WORK
BARRELING WORK
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Cut and Crown Barrel $100
Cut and Crown Barrel $100
(Must have Form-4 if SBS/Class-3 conversion)
(Must have Form-4 if SBS/Class-3 conversion)
Hone/Polish Chamber $40
Hone/Polish Chamber $40
Hone/Polish Bore $40
Hone/Polish Bore $40
ReCrown & Thread Barrel For Pumpgun $180
ReCrown & Thread Barrel For Pumpgun $180
for Rem Choke (Only, 12G Only)
for Rem Choke (Only, 12G Only)
(BBL Thickness Dependant)
(BBL Thickness Dependant)
SIGHT WORKS
SIGHT WORKS
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Install Tac Front Sight, Silver Solder, Plain BBL $130
Install Tac Front Sight, Silver Solder, Plain BBL $130
Install Tritium Tac Front Night SIght, Epoxy/Pin Plain BBL $80
Install Tritium Tac Front Night SIght, Epoxy/Pin Plain BBL $80
Install Ghost Ring Rear Sight, $80
Install Ghost Ring Rear Sight, $80
includes Drill/Tap in Rec. (2 Holes)
includes Drill/Tap in Rec. (2 Holes)
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes) $120
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes) $120
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge) $40/hole
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge) $40/hole
Install Picatinney Scope Rail $40
Install Picatinney Scope Rail $40
(**No Drill/Tap Req’d, If Machining is req’d, costs extra)
(**No Drill/Tap Req’d, If Machining is req’d, costs extra)
Install Sight Head, BBL Drill/Tap Included, Part Not Included $50
Install Sight Head, BBL Drill/Tap Included, Part Not Included $50
Install Sight Head in Existing Hole (Part Not Included) $50
Install Sight Head in Existing Hole (Part Not Included) $50
ACTION WORK
ACTION WORK
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Smooth Action, Rem & Mossberg Only $90-$150
Smooth Action, Rem & Mossberg Only $90-$150
Trigger Tuning (Smooth Only) $80
Trigger Tuning (Smooth Only) $80
Install Rem 870 Large Safety Button $40
Install Rem 870 Large Safety Button $40
Convert Safety to Left-Hand Button $80
Convert Safety to Left-Hand Button $80
Install Rem 870 Ejector (Part Not Included) $100
Install Rem 870 Ejector (Part Not Included) $100
STOCK WORK
STOCK WORK
(Starting At) (Part/Finishing Cost Extra)
(Starting At) (Part/Finishing Cost Extra)
Install Pachmayr Decelerator Pad $75-$150
Install Pachmayr Decelerator Pad $75-$150
(Synthetic Or Wood, Pad Not Included)
(Synthetic Or Wood, Pad Not Included)
Shorten Length Of Pull, Cut Stock $100
Shorten Length Of Pull, Cut Stock $100
(New Recoil pad may be req’d, NOT included)
(New Recoil pad may be req’d, NOT included)
Round Off Recoil Pad $40
Round Off Recoil Pad $40
Install Replacement Pump Gun Forend $40
Install Replacement Pump Gun Forend $40
(No S/S, fitting extra $)
(No S/S, fitting extra $)
Install Sling Mounts $50
Install Sling Mounts $50
Install Side Saddle $40
Install Side Saddle $40
(New Forend may be req’d, fitting extra $)
(New Forend may be req’d, fitting extra $)
Saiga Shotgun Stock/Trigger Guard Conversion $280
Saiga Shotgun Stock/Trigger Guard Conversion $280
(Parts Not Included)
(Parts Not Included)
CERAKOTE PRICING BELOW
CERAKOTE PRICING BELOW
STANDARD PISTOLS
STANDARD PISTOLS
(GLOCK, 1911, XD, etc.)
(GLOCK, 1911, XD, etc.)
(Starting At)
(Starting At)
- 1- Color Complete $200.00
- 2- Color Complete $250.00
- 3- Color / Beginning Camo Price $350.00
- Stencil / Custom Job Quote (Starting at) $350.00
- Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
- Sig Sauer / Small Autos / Revolvers ADD + $40.00
- Non-Stocked Colors Surcharge $40.00
SHOTGUNS
SHOTGUNS
(Starting At)
(Starting At)
- 1- Color Complete $250.00
- 2- Color Complete $275.00
- 3- Color Camo Price $350.00
- Stencil / Custom Job Quote (Starting at) $400.00
- Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
- Non-Stocked Colors Surcharge $40.00
BOLT ACTION RIFLES
BOLT ACTION RIFLES
(Starting At)
(Starting At)
- 1- Color Barreled Action $200.00
- Bolt Color Change $40.00
- 2- Color Camo Price $275.00
- Stencil / Custom Job Quote (Starting at) $400.00
- Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
- Non-Stocked Colors Surcharge $40.00
STOCKS – ALL But Wood
STOCKS – ALL But Wood
(Starting At)
(Starting At)
- 1- Color Barreled Action $100.00
- 2- Color Complete $150.00
- 2- Color Camo Price $275.00
- Stencil / Camo / Custom Job Quote (Starting at) $300.00
- Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
- Non-Stocked Colors Surcharge $40.00
COMPLETE BOLT ACTION RIFLES SUBTITLE
COMPLETE BOLT ACTION RIFLES SUBTITLE
(Starting At)
(Starting At)
- 1- Color Complete $300.00
- 2- Color Complete $350.00
- 2- Color Camo Price $400.00
- Stencil / Camo / Custom Job Quote (Starting at) $500.00
- Just BBL Action, Bolt, Handle, and Shround $200.00
- Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
- Non-Stocked Colors Surcharge $40.00
AR / AK STYLE RIFLES
AR / AK STYLE RIFLES
(Starting At)
(Starting At)
- AK Complete Rifle- 1 Color: $350.00
- 1- Color Complete $275.00
- 2- Color Complete $350.00
- 3- Color /Beginning Camo Price $375.00
- Stencil / Custom Job Quote (Starting at) $500.00
- Disassembly / Reassembly Fee $75.00* (*Charges May Apply)
- Non-Stocked Colors Surcharge $40.00
ACCESSORIES
ACCESSORIES
(Starting At)
(Starting At)
- Stripped AR Receiver Set $100.00
- Individual Receivers $60.00
- Front Handguard $60.00
- Quad Rail, Keymod Rail, Front HG Rail $85.00
- AR Rear Stocks (Starting At) $60.00
- Suppressors (NFA Paperwork Required) $150
- Non-Stocked Colors Surcharge $40.00
- Ala’ Carte Items (Depending on Size, Composition, etc.) $80.00*
- *Possible “Basket Rates” Available on Ala’ Carte Items
- Disassembly / Reassembly Charges May Apply
SCOPES
SCOPES
(Starting At)
(Starting At)
- Scope 1- color $250.00
- Scopes (CK’d w/ complete CK rifle job) $200.00
- Trijicon ACOG Sight $250.00
- EOTech Hood, Flashlight $50.00
- Rifle Mags (Minimum of 4) $20.00
- Pistol Mags (Minimum of 5) $20.00
- Misc Parts, Magpul AFGs, Grips, (Minimum 2) $25.00
- Non-Stocked Colors Surcharge $40.00
- Disassembly / Reassembly Charges May Apply
Page updated
Google Sites
Report abuse