How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a real gaming headset built for VR and low-latency console or PC play, choose Logitech PRO Gaming Headset; if you need a converter box that turns an optical TV output into a 3.5 mm signal so you can plug in wired headphones, choose Tackston 192KHz.
These two products share a plug size and almost nothing else. One is worn on your head. The other sits between your TV and your headphones. I'll break down what each one actually does so you can stop comparing them and just buy the right one.
• Logitech PRO Gaming Headset — biggest strength: a purpose-built over-ear headset with a detachable boom mic, passive noise-isolating leatherette pads, and a steel and aluminum frame, all wired through a low-latency 3.5 mm aux connection.
• Logitech PRO Gaming Headset — biggest trade-off: it's a renewed unit with a 90-day limited warranty, and it needs a device with a 3.5 mm jack to work at all.
• Tackston 192KHz — biggest strength: it converts a digital optical/TOSLINK signal into analog 3.5 mm at up to 192KHz/24-bit, which is exactly what you need to run wired headphones off a TV that has no headphone jack.
• Tackston 192KHz — biggest trade-off: it's unidirectional, needs a 5V USB power source, and only works if your TV is set to PCM stereo — no Dolby or DTS bitstream.
• Who each is for: Logitech for VR players and gamers who want one headset for Quest 2, console and PC; Tackston for TV watchers who want to listen on wired headphones without disturbing anyone else.
This headset was designed as the over-ear audio solution for the Oculus Quest 2, and the spec sheet reads that way. The package includes a custom-length cable for the Quest 2, a separate cable with inline volume and mute for console or PC, a detachable mic with a full pop filter, and a PC splitter for rigs with separate mic and headphone jacks. That's a lot of small parts, but it means one headset can move between VR, a controller and a desktop without you buying adapters.
The build is the part I'd point a buyer toward. An aluminum fork and a steel-reinforced headband put it well above the plastic-frame headsets you find at the budget end, and the leatherette ear pads give you passive noise isolation — no battery, no charging, no software. Sound comes from a dynamic driver rated 20 Hz to 20,000 Hz, which covers the full audible range. The 3.5 mm wired connection keeps latency at effectively zero, which matters far more in VR than in a single-player game.
Who should buy it: Quest 2 owners who want proper over-ear audio instead of the built-in speakers, and anyone who plays across console, PC and VR with the same headset. Who should skip it: iPhone and modern Android users with no headphone jack, people who want wireless freedom, and anyone uncomfortable buying renewed — this listing is a renewed unit covered by a 90-day limited warranty rather than a new one.
Forget "headset" for a second. The Tackston 192KHz is a cable-shaped converter with one job: take an optical/TOSLINK digital signal out of a TV and turn it into an analog 3.5 mm output you can plug headphones into. It handles sample rates of 32, 44.1, 48, 96 and 192KHz at up to 24-bit, which is more resolution than any TV broadcast or streaming service will actually send you — the headroom is there, and that's fine.
Two things decide whether it works in your living room. First, direction: signal flows optical → 3.5 mm only. You cannot use it to push audio from a 3.5 mm source into an optical input, so don't buy it hoping to feed a soundbar that way. Second, setup: it needs its USB cable connected to a 5V supply, and your TV's digital audio output format has to be set to PCM/Stereo. If your TV is outputting Dolby or DTS bitstream, you'll get silence until you change that setting. One more quirk worth knowing up front — your TV remote won't control playback volume through this path, so you'll adjust loudness on the headphones or speaker instead.
Who should buy it: anyone with a TV that has an optical out but no headphone jack, especially people who want to watch late-night TV on wired headphones without waking the house. It's also a genuinely useful accessory for hearing-impaired viewers who need audio routed straight into their own headphones. Who should skip it: gamers looking for a mic and a headband, and anyone whose TV already has a working 3.5 mm or Bluetooth headphone output.
• Best for VR gaming → Logitech PRO Gaming Headset. It ships with a custom-length cable for the Quest 2 and the whole design is built around that use.
• Best for TV headphone listening → Tackston 192KHz. It exists purely to get optical audio into a 3.5 mm jack.
• Best for voice chat → Logitech PRO Gaming Headset. The detachable boom mic with a full pop filter and inline mute has no equivalent on the Tackston.
• Best for build quality → Logitech PRO Gaming Headset. Aluminum fork, steel-reinforced headband, leatherette pads. The Tackston is a PVC-sheathed cable.
• Best for high-resolution audio handling → Tackston 192KHz. Up to 192KHz/24-bit optical conversion versus a 20 Hz–20,000 Hz analog headset driver.
• Best for zero setup → Logitech PRO Gaming Headset. Plug the 3.5 mm jack in and you're done. The Tackston needs USB power plus a PCM menu change on your TV.
• Best for quiet, no-disturbance viewing → Tackston 192KHz. That's the exact scenario it was made for.
• Best for cross-device flexibility → Logitech PRO Gaming Headset. Two cables, a splitter and a detachable mic cover Quest 2, console and PC.
In my opinion, these aren't competitors — they're two different jobs wearing similar plugs. If you're asking "which gaming headset should I buy," I'd take the Logitech PRO Gaming Headset. The steel-and-aluminum frame, the passive noise isolation, the detachable mic and the zero-latency wired connection are exactly what a VR or console player needs, and the included cables mean it works across three platforms out of the box. The renewed status and 90-day warranty are the honest caveats.
If you're asking "how do I get my TV's audio into my headphones," the Logitech is useless to you and the Tackston 192KHz is the correct answer. Buy the one that matches the problem you actually have.
No. It's a wired headset using a 3.5 mm aux connection, which is what keeps latency low — good for VR and competitive play, but it does mean a cable.
It's designed for optical/TOSLINK sources like a TV, and it requires PCM stereo output plus 5V USB power. If your console can output PCM over optical, it can work, but surround formats like Dolby and DTS are not supported.
Yes. You'll need to set your TV's sound output to optical and its digital audio format to PCM/Stereo. Volume control also moves off the TV remote and onto your headphones or speaker.
They solve different problems, so value depends on what you're missing. If you need a headset with a mic for VR or console, the Logitech is the better buy. If you need to route TV audio to headphones, the Tackston does a job the Logitech simply can't. Check the current price on Amazon for each before deciding.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.