Linksys Extender Setup - How to login & perform the Linksys Setup process?
Linksys Extender Setup - How to login & perform the Linksys Setup process?
Linksys Wi-Fi range extenders are known for extending the coverage and range of the existing Wi-Fi signals inside the home or the workplace. The extenders can expand the range of any router to every corner of the house or the workplace.
Through the Linksys router's help, it gets easy to eliminate the dead zones inside the home or the workplace. However, the users must have to configure and perform the Linksys extender setup procedure to avail the extender's benefits.
The users facing the dead zone or no signal issue at their home or workplace can resolve it by using the Linksys range extender. There could be several reasons behind the dead zone or no signal issue, so to resolve the issue, consider using the Linksys range extender.
Linksys is known for manufacturing high-tech wireless range extenders. Thus, the Linksys range extender aims to enhance the existing router's range and terminate the dead zone issue. Therefore, the Linksys extender users looking for the Linksys extender setup should read the information provided here.
The users who face issues with the Linksys extender login procedure are suggested to follow the steps provided below. Therefore, once the user accesses the login page, then they can easily setup the range extender.
Note: The following steps are for the non-configured extender.
Note: The users will need to plug-in the system to the ethernet port of the range extender. After that, follow the steps to access the web-based setup page of the Linksys extender.
Firstly, plug-in the Linksys range extender into the power outlet.
After this, the users are recommended to wait for the indicator lights to become stable.
Then carefully connect the system to the extender’s ethernet port via ethernet cable.
After this, open the web browser and enter the extender’s IP address, i.e., "192.168.1.1."
Then the user will have to enter the username and the password.
Note: The users are suggested to leave the “Username” field blank and in the password field, enter “admin,” then click on the “OK” or “Login” option.
After applying these steps, the users can now access the web-based Linksys extender setup page.
Manual Method
It is vital to perform the Linksys extender setup process to overcome the dead zone or low signal issues. Therefore, after completing the setup procedure, the user will get a fast range of the existing router signals in the desired areas. So, perform the steps provided below to manually setup the range extender.
Plug-in the range extender to the electrical outlet.
After this, the users are suggested to turn “ON” their Wi-Fi range extender.
Then open the web browser and enter the default IP address, i.e., “192.168.1.1,” in the address bar.
Now the Linksys extender setup page will open.
After this, the users are advised to enter the login details in the given field.
Then the home page will get open on the screen.
From there, click on the “Wireless Settings” option.
Then click on a manual radio icon located on the screen.
After this, the users are suggested to setup the security settings for their Wi-Fi range extender.
In the end, type the password and save the settings.
There are two ways to perform the Linksys Extender Setup process, i.e., via Wi-Fi protected setup or WPS.
Wi-Fi Protected Setup Button
Web-based WPS button
The user will have to access the default Linksys extender setup page and select one of the available three options:
Wi-Fi Protected setup button
Using the WPS PIN
After selecting the suitable option, then proceed further with the setup procedure.
Wi-Fi Protected Setup Button
The users will have to follow the Linksys installation via the WPS button.
In the beginning, turn “ON” the Linksys extender.
Then press the extender's WPS button.
After that, press and hold the WPS button of their router.
Now let the WPS LED turn “ON.”
After performing the steps discussed above, the users can easily setup the extender via the WPS button. Now the users are suggested to connect their devices such as laptops, computers, smartphones to the extender and enjoy the Wi-Fi's extended range.
Web-based WPS button
Wi-Fi Protected setup button
Follow the steps provided below to let the extender up and running through the Web-based WPS button.
Open the default Linksys extender setup page.
Now, after successfully logging in, the users are suggested to move over to the Wireless section.
Then click on the “WPS” button.
After this, look and press the WPS button on the router.
Now the Linksys range extender setup has been completed.
Using the WPS PIN
If the Wi-Fi router has the PIN, the users must enter the PIN in the second field of the extender’s setup page.
Now click on the “Register” button.