We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-23 · 7 min read · Independent comparison
If you want a drop-in refresh for Beats Solo 2 or Solo 3 on-ear headphones with a memory-foam cushion that seals tight and comes with a proper pry tool, choose L LTGEM Replacement Ear Pads; if you need replacement pads for a JBL Tune 700-series headphone and want extra-thick, slow-rebound cushions with a one-year manufacturer warranty, choose Hmoke Replacement Ear Pads.
• L LTGEM — biggest strength: Purpose-built for Beats Solo 2/3 on-ear models, with high-resiliency memory foam, skin-friendly protein (faux) leather, and a specialized pry bar tool included for damage-free removal.
• L LTGEM — biggest trade-off: It fits only Beats Solo 2 and Solo 3 on-ear headphones. It is explicitly not compatible with Beats Studio over-ear models, and the warranty description is "NO."
• Hmoke — biggest strength: High-density slow-rebound memory foam in an extra-thick cushion, premium soft protein leather, a plastic removal tool in the box, and a 1-year manufacturer warranty.
• Hmoke — biggest trade-off: It is locked to the JBL Tune family (700BT, 710BT, 720BT, 750BTNC, 760NC, 770NC). It will not fit Beats headphones at all.
• Who each is for: L LTGEM is for Beats Solo owners whose pads are flaking or flattened; Hmoke is for JBL Tune owners who want a thicker, softer cushion and a longer coverage window.
L LTGEM built this set around one specific problem: Beats Solo 2 and Solo 3 on-ear pads wear out long before the headphone does. The cushions are high-resiliency memory foam wrapped in a skin-friendly synthetic leather that the spec sheet says resists sweat, peeling, and daily wear. In practice, that combination matters because on-ear pads sit pressed against the ear, so they take the full brunt of sweat and friction. A foam that springs back rather than staying crushed is what keeps the fit consistent months in.
The second thing L LTGEM gets right is the install. The kit includes a specialized pry bar tool, and the new cushions align and snap into place. Anyone who has pried old pads off a Solo with a fingernail knows how easy it is to gouge the plastic ring underneath, so a tool that matches the job is genuinely useful rather than filler. The listing also notes the process takes minutes and that the kit is one pair of pads (left and right) plus the pry bar. Beats Solo headphones are not included, so this is a refresh, not a new headphone.
Who should buy it: Beats Solo 2 or Solo 3 owners with flattened, cracked, or peeling pads who want the acoustic seal back. The adaptive memory foam is designed to form an effective seal, which reduces outside noise and cuts sound leakage. That is the real reason to replace Solo pads rather than live with worn ones — bass response and isolation both depend on the cushion pressing evenly around the ear.
Hmoke Replacement Ear Pads: Who It's For
Hmoke takes the opposite approach: one family of headphones, done thoroughly. These pads are designed specifically for the JBL Tune 700BT, 710BT, 720BT, 750BTNC, 760NC, and 770NC. The listing asks buyers to confirm their model before purchase, and that is worth taking seriously — the JBL Tune line spans several shapes across those model numbers, so verifying yours is the difference between a five-minute swap and a return.
The cushion itself is the selling point. Hmoke uses high-density slow-rebound memory foam with premium soft protein leather, and describes the pads as extra thick. Slow-rebound foam is a different feel from fast-spring foam: it compresses gradually and holds the shape of your ear for a moment before easing back, which is why Hmoke can claim comfort over long wear without swelling or pain. Whether that reads as "soft right from the first time" is down to preference, but the material spec backs the intent.
Hmoke also leans on value in a specific way — the pads are described as matching the originals and fitting perfectly, with the pitch that a simple swap gives old headphones a new look rather than buying a new pair. That is a fair framing for anyone whose Tune 700-series cups have gone shiny, cracked, or flat. The kit includes a plastic tool to remove the old pads and seat the new ones, no special tools required, and the whole job takes a few minutes.
Two more practical points. Hmoke lists a 1-year manufacturer warranty, which is a real difference from the L LTGEM set. And the brand says it specializes in replacement ear pads and responds to questions within 24 hours, which is useful if you are unsure about fit. Dimensions are listed at roughly 3.15 x 0.98 x 3.54 inches per pad.
Who should buy it: JBL Tune 700-series owners who want a thicker cushion, a slow-rebound feel, and a warranty. Who should skip it: Beats owners, and anyone with a JBL model outside the listed Tune numbers.
• Best for Beats Solo 2 / Solo 3 → L LTGEM Replacement Ear Pads. It is the only one of the two built for those mounts.
• Best for JBL Tune 700BT / 710BT / 720BT / 750BTNC / 760NC / 770NC → Hmoke Replacement Ear Pads.
• Best for a thicker, plusher cushion → Hmoke. Extra-thick, slow-rebound memory foam is the headline spec.
• Best for a tighter acoustic seal and less sound leakage → L LTGEM. Its high-resiliency foam is described around sealing and reducing leakage.
• Best for install confidence → a tie. Both include a removal tool; L LTGEM ships a specialized pry bar, Hmoke a plastic tool.
• Best for warranty coverage → Hmoke. It carries a 1-year manufacturer warranty; L LTGEM lists none.
• Best for long-session comfort → Hmoke, based on its slow-rebound, no-swelling claim; L LTGEM's skin-friendly faux leather is the stronger pick if sweat and peeling are your main gripe.
• Best for fit certainty → whichever matches your headphone. Compatibility, not preference, decides this one.
In my opinion, the honest answer is that these two barely compete — they serve different headphones, and that should settle it before anything else does. If you own Beats Solo 2 or Solo 3, I would buy the L LTGEM set: the memory foam, the acoustic-seal design, and the included pry bar are exactly what a Solo refresh needs, and there is no alternative here that fits. If you own a JBL Tune 700-series headphone, I would buy the Hmoke pads instead — the extra-thick slow-rebound foam and the 1-year manufacturer warranty make it the more complete package for long wear. Check the current price on Amazon for whichever one matches your model, and confirm your exact headphone number before ordering.
can you sleep with over ear headphones
You can, but it is not ideal, and it matters here only in a limited way. Neither of these pads changes the headphone's shape or clamping force — L LTGEM's set is for Beats Solo 2/3 on-ear models, and Hmoke's is for JBL Tune on-ear and over-ear models. If you sleep on your side, the cushion presses against the pillow and the foam compresses; a slow-rebound foam like Hmoke's will take that pressure more gradually, but neither pad is designed as a sleep accessory.
how to wear over ear headphones
Set the headband so the pads sit centered over your ears, then adjust the sliders so the band rests lightly on top of your head without pressing. The cushions should form a seal around the ear rather than sitting on top of it. This is where fit quality shows: L LTGEM describes its memory foam as creating an effective acoustic seal, and Hmoke describes its slow-rebound foam as shaping to your ear — both depend on the pad being the correct model for your headphone.
how to wear over ear headphones properly
Properly means even pressure on both sides and no gaps at the front or back of the pad. If one side feels looser, adjust the headband rather than pushing the cup. Both kits are direct replacements, so if the new pad does not sit flush, the usual cause is an incorrect model rather than technique — Hmoke specifically asks buyers to confirm their JBL Tune model, and L LTGEM's pads are only for Solo 2 and Solo 3 on-ear models, not Beats Studio.
how should over ear headphones fit
Snug but not tight: the pad should touch all the way around your ear with light, even pressure and no pinching at the temples. Memory foam is what makes that possible over time — L LTGEM's high-resiliency foam is meant to contour and hold its shape, and Hmoke's high-density slow-rebound foam is meant to stay comfortable during long wear without swelling or pain. If your current pads are flattened or peeling, no amount of adjusting will fix the fit; replacing them will.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: AKHQC Replacement Ear Pads vs CCYLEZ Replacement Ear Pads, HIQUE 70 vs GEVO Gel Ear Pads, Audio-Technica HP-EP-WH Replacement Ear vs Linsoul KZ ZSX 5BA+1DD