Biorad 冷光照膠系統
Biorad 冷光照膠系統
管理人員:蘇文正 分機:5384 E-Mail:wjsu@kmu.edu.tw
儀器規格
1. 主機可搭配不同樣品載盤,應用於不同生物樣品偵測,且需可自動偵測各種激發盤,並自動執行預設條件拍照。
2. 可單機操作,並內建12吋或以上之觸碰式螢幕,不需外接電腦或平板,且螢幕具多點觸控功能,可以手指拉動無段放大縮小,
無需改變樣品台高度,即可拍攝不同大小的區域,可拍攝面積可達21x16cm以上。
3. 具備冷卻式CCD,以降低背景雜訊。且CCD解析度需達600萬畫素以上,每個真實像素大小至少需達4.5umx4.5um或更大,以提高
更佳之冷光偵測靈敏度,並能真實呈現65,535以上灰階之訊號,且線性範圍至少達10的4次方或更佳。
4. 自動曝光功能,包含快速模式及最佳影像模式,並有快速預覽模式,可任意選擇欲拍攝之訊號位置,自動偵測最佳曝光時間,
擷取最佳影像或快速影像模式。
5. 有stain-free拍攝功能,可快速擷取蛋白影像,並精確分析總蛋白量進行normalization分析計算,不需額外使用loading control。
6. 自動化對焦鏡頭,以符合各種實驗應用膠片厚度之需求。
7. 可於拍攝後,於主機螢幕上直接比較1-4張或更多照片,且有複製位置及明暗對比的功能,方便進行比對快速選出最佳照片。
8. 平場校正設計,能達到影像照射時的光線一致性,在任何焦距及不同照明狀況下可修正因光源不均或光學組件所產生的不均勻
背景,以確認達成定量功能。
9. 內建穿透式紫外光源(302nm)及上白光源,滿足不同應用需求。
10. 為避免因傳統 Internal Control 造成差異導致實驗數據變異,內建誤差計算(Normalization)功能,可選擇 Total Protein 及
HouseKeeping 蛋白作計算,另外原廠硬體系統本身可以完全結合TPN (Total Protein Normalization)實驗直接進行內控定量分析
使用,具備原廠規範之免染技術(Stain-Free),以達到最佳定量之結果,避免因影像分析數據數值不穩定,造成國際期刊及研究
引發數據造假之疑慮。
Acoustic focusing fluidics enable the high-sensitivity of the Attune Flow Cytometers even at very fast sample flow-rates (up to 1000 µL/min)
The Attune CytPix model adds a high-speed brightfield camera to capture images of cells as they pass through the flow cell, even at the fastest flow rates
Image analysis software implements simultaneous measurement of cell morphology parameters in addition to standard flow cytometric parameters
Acoustic focusing also lets your lab rapidly acquire high-quality data. Users can achieve sample throughput rates of 12.5 µL/min or 1,000 µL/min, up to 10 times faster than traditional hydrodynamic focusing systems and acquisition speeds of 35,000 events per second. This means processing all samples—including low-concentration and precious samples—more quickly and accurately with minimal loss in quality.
Detection of rare events requires acquisition of high numbers of cells to attain a reliable measure of accuracy. Attune Flow Cytometers allow dilute samples to be processed quickly at sample input speeds of up to 1 mL/min, significantly faster than conventional cytometers that support maximum sample input rates of 60–100 µL/min. Acoustic focusing thus offers a unique combination of speed and quality, cutting the time to collect rare events significantly over long acquisition times.
Designed for flexibility
Attune Flow Cytometers are configurable with up to 4 spatially separated lasers and 16 parameters. Spatial separation provides flexibility for multicolor panel design and streamlines compensation. The system offers superior speed with acquisition rates of up to 35,000 events per/second with high sensitivity to meet a range of research requirements.
High sensitivity distinguishes between dim signals and background, resulting in less variation and better signal separation. Fluorescent resolution coefficient variation is less than 3% for a single peak, and predicted MESF is ≤80 (FITC), ≤30 (PE), ≤70 (APC). Sensitivity in comparison to competitive systems is described below.
To prevent clogging and allow for volumetric analysis, the Attune Flow Cytometers use a positive displacement syringe pump to control sample volume. The system can perform volumetric cell counts in a known volume (gated or total events) and can easily gate out dead cells to count live cells only in a live/dead analysis. Unlike traditional cytometers that operate at a maximum pressure of 15 PSI, Attune Flow Cytometers control pressure at 75 PSI, reducing the likelihood of cell-cell interactions and resulting in clog resistance.