How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want an open-ear, clip-on design with a long battery and a modern wireless connection, choose Kinglucky Clip-On Earbuds Gen; if you need a wired in-ear headset with a plug that works with older phones and computers, choose BYZMODLX ENC Noise Cancelling. That is the honest split. These two products solve completely different problems, and the right pick depends less on hype and more on how you actually listen.
• Kinglucky's biggest strength: a true open-ear clip-on build that stays off your ear canal, with Bluetooth 6.0, a 50-hour total battery ceiling and IPX5 water resistance.
• Kinglucky's biggest trade-off: open-ear designs leak a little sound by nature, and there is no wired fallback if the battery runs dry.
• BYZMODLX's biggest strength: a wired 3.5mm connection with a Type-C adapter in the box, so it plugs into just about anything, plus a reinforced cable and gold-plated plug built for durability.
• BYZMODLX's biggest trade-off: it is tethered to your device with a cable, so it is not the pick for running, gym work or moving around freely.
• Kinglucky is for you if you want lightweight, cable-free listening for workouts, commutes and long days, and you wear glasses or earrings.
• BYZMODLX is for you if you want a dependable wired headset for calls and listening on a phone, laptop or desktop, and you never want to think about charging.
The Kinglucky Clip-On Earbuds Gen is built around a simple idea: keep the sound out of your ear canal entirely. It uses a C-shaped clip that hooks over the ear rather than pushing a bud inside it, and each earpiece weighs just 5.2g. The brand pairs that with extended ear hooks designed to reduce friction and pressure, which is exactly the detail that matters if you wear glasses or earrings. In my view, that is the single most interesting thing about this product — it is one of the few designs that openly accounts for people who cannot comfortably wear normal in-ear buds.
Who should buy it: runners, cyclists, gym-goers and commuters who want to hear traffic and their surroundings, people with small ears, and anyone who finds in-ear buds painful or prone to causing irritation. The IPX5 rating means sweat and rain are not a problem. Who should skip it: if you want maximum isolation from a noisy train or plane, a clip-on open-ear design is the wrong tool, and if you want a wired connection for a desktop setup, this is not it.
BYZMODLX ENC Noise Cancelling: Who It's For
The BYZMODLX ENC Noise Cancelling is the opposite philosophy. It is a wired in-ear headphone with a 3.5mm jack, and it ships with a USB Type-C to 3.5mm adapter so it can connect to phones that dropped the headphone port as well as to a PC or laptop. That adapter is the quiet hero of this product — it is the reason it stays useful across a mixed bag of devices instead of being stranded on one connector type.
Durability is clearly the design focus. The cable uses 144 oxygen-free copper wires for tensile strength while keeping the audio path intact, the plug is 18K gold-plated for oxidation resistance, and the connector is rated for 10,000+ plug-and-pull cycles. Those are concrete numbers, and they tell you this is aimed at someone who plugs in and unplugs constantly — a desk worker, a student, someone on calls all day. The earpieces are lightweight and ergonomically shaped for a secure, noise-isolating fit, which is the benefit in-ear designs have over open-ear ones. Audio specs are a 16-ohm impedance, 100dB sensitivity, 20Hz–20,000Hz range and a 48KHz frequency response, driven by a dynamic driver. Controls are physical push buttons rather than touch, with environmental noise cancellation for calls.
Who should buy it: anyone who wants a cable that will not die in three months, people who take a lot of hands-free calls on a laptop or phone, and users who prefer a physical button they can find by feel without looking. Who should skip it: if you want to move around untethered, or you dislike anything inside your ear canal, this is not the right product for you.
• Best for open-ear comfort → Kinglucky Clip-On Earbuds Gen. Nothing enters the ear canal, which is the whole point of the design.
• Best for glasses and earrings → Kinglucky Clip-On Earbuds Gen. The extended hooks and 5.2g weight are built around avoiding pressure points.
• Best for workouts, sweat and rain → Kinglucky Clip-On Earbuds Gen. IPX5 plus a shake-proof clip-on fit.
• Best for battery freedom → Kinglucky Clip-On Earbuds Gen. 7 hours per charge and up to 50 hours total, with a digital display so you know where you stand.
• Best for plugging into almost anything → BYZMODLX ENC Noise Cancelling. 3.5mm jack plus a Type-C adapter covers phones, laptops and desktops.
• Best for long-term cable durability → BYZMODLX ENC Noise Cancelling. 144 oxygen-free copper wires, gold plating and a 10,000+ cycle connector rating.
• Best for isolation from background noise → BYZMODLX ENC Noise Cancelling. The in-ear fit physically blocks more sound than an open-ear clip.
• Best for never charging anything → BYZMODLX ENC Noise Cancelling. It draws power from the device it is plugged into.
For most people reading this, I would buy the Kinglucky Clip-On Earbuds Gen. The open-ear clip-on format, the 5.2g weight, the glasses-friendly hooks, Bluetooth 6.0 and the 50-hour total battery make it the more flexible everyday product, and it fits the "wireless headphones with ENC mic" brief that brought you here in the first place. I would only steer you to the BYZMODLX ENC Noise Cancelling if you specifically want a wired connection, need isolation, or want a cable engineered to survive years of plugging and unplugging. Both are honest designs. They just answer different questions.
how to use wireless headphones mic on pc
Pair the Kinglucky Clip-On Earbuds Gen over Bluetooth 6.0, then open your computer's sound settings and select the headset as both the output and the input device. Its dual-mic ENC array handles voice pickup once it is set as the default microphone. If your PC has no Bluetooth, you would need a Bluetooth adapter, since this model has no headphone jack.
how to use mic on wireless headphones
Once a wireless headset is paired, the microphone is usually active automatically during calls and voice apps — you just need to choose it as the input device. On the Kinglucky, the ENC processing is handled on the headset itself, so there is nothing extra to switch on. Just confirm the correct input is selected in whichever app you are using.
can you use bluetooth headphones as a mic
Yes, in most cases. Bluetooth headsets like the Kinglucky Clip-On Earbuds Gen include a built-in microphone and can serve as your input device for calls, meetings and voice chat. The catch is that a Bluetooth mic is generally not as clean as a wired one, which is one reason the BYZMODLX wired option exists for desk-bound call work.
do all bluetooth headphones have a microphone
No. Bluetooth headphones with a mic are common, but plenty of models are listen-only. The Kinglucky Clip-On Earbuds Gen does include a microphone with ENC for calls, so it works for both listening and talking. If you are unsure about a specific pair, check the spec sheet for a stated microphone or ENC feature.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: LORELEI B-C6 vs KASOTT QKZ ZXT, Wentronic Y05 vs FUNNYEAH JewelPods C01, JVC Gumy vs MKDTNJT Kids Earbuds: In Ear Earphones, SANNWEEN Sleep Headphones Headband vs Mixiba 2-Pack