How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wired, low-impedance in-ear monitor with a detachable cable and a fit built for gaming and critical listening, choose Kinboofi WAN'ER S.G II; if you need true wireless freedom with aptX Bluetooth, a charging case and long battery life, choose ICESOMNUS Sabbat E12.
• Kinboofi WAN'ER S.G II — biggest strength: a single 10mm PET dynamic driver tuned for clarity, paired with a 19Ω impedance and 113.5dB sensitivity that make it very easy to drive from a phone or a controller.
• Kinboofi WAN'ER S.G II — biggest trade-off: it is a wired 3.5mm set with no battery, no wireless mode and no charging case, so you are tethered to your source at all times.
• ICESOMNUS Sabbat E12 — biggest strength: Qualcomm QCC3071 Bluetooth 5.3 with aptX, CVC call noise reduction and a charging case that extends playback well past a single session.
• ICESOMNUS Sabbat E12 — biggest trade-off: its 32Ω impedance and 106dB sensitivity mean it leans on its internal amplification, and the 40ms latency figure matters if you are sensitive to wireless lag.
• Pick Kinboofi WAN'ER S.G II if you want a cable, a replaceable 2-pin connection and the lowest-fuss path to consistent sound on any device with a headphone jack.
• Pick ICESOMNUS Sabbat E12 if you want to move around untethered, take calls, and never think about a cable again.
The WAN'ER S.G II is built around one 10mm dynamic driver using a PET diaphragm. The design brief here is acoustic rather than convenience: a single well-tuned driver with a modified structure meant to improve drivability and deliver clear, detailed and natural reproduction. With 113.5dB sensitivity at 1kHz and 19Ω impedance, this is a genuinely easy load. Plug it into a phone, a laptop, a handheld console or a controller and it will get loud without asking much of the source. That is the whole appeal of a low-impedance IEM, and it is why this one is marketed as a gaming earphone as much as a music one.
The physical package is aimed at people who keep a set in a bag or on a desk. The cable is a 120cm silver-plated copper design, and the 2-pin connector is detachable — meaning if the cable wears out or you want to swap to a different one, you can, rather than throwing the whole set away. Sound isolation is listed as the noise control method, which is passive isolation from the in-ear seal rather than any active circuitry. The earpiece uses a hook-style shape and the color is Dark Black.
Who should buy it: someone who wants one dependable wired set for gaming, calls through a headset jack, and everyday listening where the source is fixed — a desk, a console, a laptop. The detachable cable and the hypoallergenic-material note also suit people who are hard on their gear or have had irritation from cheaper tips and housings. Who should skip it: anyone who needs to move around the house or commute without a cable, take a call while walking, or leave the house without a dongle. If wireless is non-negotiable, this is the wrong category entirely.
The Sabbat E12 takes the same driver size — a 10mm dynamic unit — and builds a completely wireless product around it. The listed sound signature is balanced and natural, aimed at rich vocals, strong bass and crisp highs, with genres from acoustic and jazz to pop and classical called out. The platform is Qualcomm's QCC3071 with Bluetooth 5.3 and aptX, which is the part that matters most for wireless listening: aptX is a higher-quality codec than plain SBC, and the chipset is associated with faster pairing, more stable connections and lower latency. The listed audio latency is 40 milliseconds.
Battery is where this one separates itself. You get a claimed 6+ hours per earbud and up to 30 hours with the case, with roughly an hour of charging time for the buds and case via USB-C. The case holds a 750mAh battery and the buds carry 40mAh each. Automatic pairing kicks in when you open the charging bin, so the reconnect ritual is minimal. For calls, CVC noise reduction handles the microphone side, and the noise control is listed as environmental noise cancellation — that is a call-clarity feature, not active noise cancellation for your music, so don't expect it to mute a train carriage.
Comfort and looks get real attention here. The ergonomic in-ear shape with soft silicone tips is pitched at long workdays, commuting and travel. The finish is a clean white "Star Cloud Stone" look in an ABS enclosure with a white carrying case — minimalist rather than gamer-flashy. Impedance is 32Ω and sensitivity is 106dB, so it is a little harder to drive than the Kinboofi set, though that is irrelevant in practice since the earbuds have their own amplification.
Who should buy it: commuters, remote workers on calls all day, and anyone who wants one product for music, podcasts and voice without a cable in the way. Who should skip it: someone who wants a wired connection for zero-latency gaming or who prefers the serviceability of a replaceable cable. There is no headphone jack here, and the controls are physical push buttons rather than touch — worth knowing if you have a preference.
• Best for wired, zero-latency use → Kinboofi WAN'ER S.G II. A 3.5mm jack and no wireless transmission means no codec latency to worry about.
• Best for battery life and untethered listening → ICESOMNUS Sabbat E12. 6+ hours per charge and up to 30 hours with the case.
• Best for easy drivability from weak sources → Kinboofi WAN'ER S.G II. 19Ω and 113.5dB sensitivity versus 32Ω and 106dB.
• Best for calls and commuting → ICESOMNUS Sabbat E12. CVC noise reduction on the mic and environmental noise cancellation for voice.
• Best for repairability and cable upgrades → Kinboofi WAN'ER S.G II. The 2-pin cable is detachable.
• Best for wireless codec quality → ICESOMNUS Sabbat E12. Bluetooth 5.3 with aptX beats standard SBC streaming.
• Best for a minimalist, low-key look → ICESOMNUS Sabbat E12. Clean white finish, ABS shell, matching white case.
• Best for a single desk or console setup → Kinboofi WAN'ER S.G II. One cable, no charging, no pairing.
In my opinion, the deciding question is whether you want a cable. If you do — for gaming, for a desk setup, for a device with a headphone jack — I would buy the Kinboofi WAN'ER S.G II. Its 19Ω impedance and 113.5dB sensitivity make it the more forgiving of the two to drive, and the detachable 2-pin cable is a real long-term advantage. If you want to walk around, take calls and never plug anything in, I would buy the ICESOMNUS Sabbat E12: Bluetooth 5.3 with aptX and up to 30 hours of total playback is the more useful package for daily life. I would not pick either purely on the 10mm driver size — both use one — but on how you actually listen.
what is 10mm driver earbuds
A 10mm driver is the diameter of the speaker unit inside the earbud — here, a dynamic driver, which moves a diaphragm to produce sound. Both the Kinboofi WAN'ER S.G II and the ICESOMNUS Sabbat E12 use a single 10mm dynamic driver. That size is a common middle ground: large enough to move air for bass, small enough to fit comfortably in an in-ear housing.
is 10mm driver good for earbuds
Yes, it is a well-established size for in-ear models, and both products here use it. Driver diameter alone does not determine sound quality — the diaphragm material, the tuning and the housing all matter. The Kinboofi set uses a PET diaphragm with a modified structure for drivability; the Sabbat E12 is tuned for a balanced signature with strong vocals and bass.
is 6mm driver good for earbuds
A 6mm driver is smaller and typically found in compact or budget designs, and it generally moves less air than a 10mm unit, which can mean lighter bass. Neither product on this page uses a 6mm driver, so if you specifically want the larger 10mm size, both the WAN'ER S.G II and the Sabbat E12 qualify.
The two are different product categories — one wired IEM, one wireless set with a charging case — so the value question comes down to what you need rather than the number alone. Check the current price on Amazon using the button on this page before deciding, since I don't publish figures here.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Jabra Evolve2 vs PLT Poly, Xmenha Invisible vs sunvito Sleep Earbuds, Philips Over vs Transformers Gaming Headset, PLT Poly vs Jeecoo G90: Office Noise Cancelling Headset