J-web Application Package Download [NEW]

2 EX-series Switches Release Notes Release Notes: J-Web Application Package Release 15.1A1 for Juniper Networks EX Series Ethernet Switches Overview Supported EX Series switches J-Web Distribution Model Upgrading to J-Web Application Package Software Compatibility Known Limitations Known Issues Overview NOTE: The J-Web Application package 15.1A1 release is for Junos OS Release 15.1R1 and its maintenance releases, that is, Junos OS Release 15.1R2, Junos OS Release 15.1R3, and so on. The J-Web Application package 15.1A1 supports all the features supported in the previous release, that is, J-Web Application package 14.1X53-A1. Juniper Networks EX Series Ethernet Switches are shipped with the Juniper Networks Junos operating system (Junos OS) installed. Junos OS has the following primary user interfaces: Juniper Web Device Manager (J-Web) GUI Junos OS CLI You can use these interfaces to access, configure, and manage your EX Series switch. This topic provides an overview of the newly re-designed J-Web interface. For information about the CLI, see CLI User Interface Overview. Supported EX Series switches In Junos OS Release 15.1R1, the J-Web interface supports EX2200, EX3300, EX4200, EX4500, EX4550, and EX6210 switches. J-Web Distribution Model For Junos OS Release 14.1X53-D10 and later, the J-Web interface is available in two packages: Platform package Provides basic features of J-Web and is installed as part of Junos OS. 2

3 Release Notes: J-Web Application Package Release 15.1A1 for Juniper Networks EX Series Ethernet Switches Application package Provides complete features of J-Web and is an installable package. Platform Package The Platform package of J-Web is installed as part of Junos OS that is shipped with your EX Series switch. The Platform package provides the basic features of the J-Web interface. The Platform package enables you to configure and maintain your switch. Application Package The Application package is not installed by default on your switch. You must download it and install it over the Platform package on your switch. The Application package provides all the features of the J-Web interface that enable you to configure, monitor, maintain, and troubleshoot your switch. For information about installing the Application package, see Upgrading to J-Web Application Package on page 4. The Platform package, which is installed as part of the Junos OS that is shipped with your switch, follows the Junos OS release cycle. However, the Application packages have their own release cycle which is independent of the Junos OS release cycle. This separate release cycle helps you get the latest features of J-Web by installing the latest version of the Application package, without waiting for Junos OS releases. NOTE: The J-Web Application package is hot-pluggable. You can install it on top of the current Junos OS installation, and you need not reboot the switch after the installation. NOTE: To determine which J-Web package you are currently using, click Help > About. The About window appears. If you are using a Platform package, only the Platform package details are displayed. If you are using an Application package, both the Platform package and Application package details are displayed. If your current J-Web package is: Then you can: Platform package Upgrade to the Application package. Application package Update to a latest version of the Application package available on the Juniper Networks server that is compatible with the Junos OS on your switch. NOTE: If you upgrade Junos OS on your switch, the current J-Web package is replaced with the J-Web Platform package that is associated with the upgraded Junos OS release. You can then install the latest Application package that is associated with the main release of the upgraded Junos OS, over the Platform package. 3

J-web Application Package Download

Download 🔥 https://shurll.com/2y4yaK 🔥

4 EX-series Switches Release Notes Release Compatibility The Application packages of J-Web have their own release cycles (A1, A2, A3, and so on), which are independent of the Junos OS release cycle. An Application package is compatible only with the corresponding major release of Junos OS. For example, the compatibility is as follows: Application package 14.1X53-A1 is compatible with all Junos OS Release 14.1X53-D where x is 10, 15, 20, and so on. Application package 15.1A1 is compatible with all Junos OS Release 15.1R, where x is 1, 2, 3, and so on. The Table 1 on page 4 illustrates the example of the release compatibility. Table 1: J-Web Release Compatibility Matrix Junos OS Release Associated J-Web Application Package Release 14.1X53-D10 Application package 14.1X53-A1 Application package 14.1X53-A2 Application package 14.1X53-A3 15.1R1 Application package 15.1A1 Application package 15.1A2 Application package 15.1A3 Any available later version of the Application package for a Junos OS release supersedes the earlier version. Thus, if Application package version 15.1A2 is available, it will supersede version 15.1A1. We recommend that you install the latest available version of the Application package. Upgrading to J-Web Application Package There are three ways in which you can download and install the J-Web Application package: Auto update Manual update CLI procedure There is a prescribed order for the installation tasks for updating to the Application package from an earlier version or from the Platform package. See Table 2 on page 5 to determine the prescribed order of tasks for your installation. 4

5 Release Notes: J-Web Application Package Release 15.1A1 for Juniper Networks EX Series Ethernet Switches Table 2: Installation Outline Mode of Installation Installation Outline Auto update To automatically check and install the latest version of the J-Web Application package: 1. Click Update Now in the Update Available window that appears when you log in to the J-Web interface. NOTE: The Update Available window appears only if there is a latest update available on the Juniper Networks server. For the Update Available window to appear when you log in, the Check for updates automatically on every login in the Update Preference section in the Maintain > Update J-Web side pane must be selected. If you choose Update Later, you can update to the latest J-Web Application package by clicking the orange icon next to Update Available on the top pane of the J-Web interface or through Maintain > Update J-Web. 2. If the switch is connected to the Internet, the Update J-Web window appears. Enter the authentication details and click Update. The Application package downloads and installs on the switch. If the switch is not connected to the Internet and your computer is connected to the Internet, download the latest version of the J-Web Application package to your computer and install it on your switch. Click Download Application Package in the Update J-Web window, enter authentication details, download the file to your computer, select the file, and click Update. NOTE: You can also download the file to your computer and update it on the switch later by clicking Select Application Package and selecting the location where the package is located. Manual Update To manually check and install the latest J-Web Application package: 1. Check for updates manually. Go to Maintain > Update J-Web in the side pane, and click Check for updates. If there is a latest update available on the Juniper Networks server, the Update Available window appears. 2. Click Update Now in the Update Available window. 3. If the switch is connected to the Internet, the Update J-Web window appears. Enter the authentication details and click Update. The J-Web Application package downloads and installs on the switch. If the switch is not connected to the Internet and your computer is connected to the Internet, download the latest version of the J-Web Application package to your local computer and install it on your switch. Click Download Application Package in the Update J-Web window, enter authentication details, download the file to your local system, select the file, and click Update. NOTE: You can also download the file to your computer and update it on the switch later by clicking Select Application Package and selecting the downloaded package location. CLI Procedure 1. Download the J-Web Application package and save it in the switch. 2. Log in to the CLI and enter the operational mode. 3. Install the package using the CLI command request system software add . 5

6 EX-series Switches Release Notes Software Compatibility To access the J-Web interface for the switch, your management device requires the following software: Supported browsers Microsoft Internet Explorer versions 9 or 10, Mozilla Firefox version 24 through 38, and Google Chrome version 27 through 43. TIP: We recommended a screen resolution of 1440 X 900 pixels. Language support English-version browsers Known Limitations This section lists the known limitations in J-Web: For EX Series switches, in the J-Web interface, the username field on the Login screen does not accept HTML tags or the < and > characters. The following error message appears: A username cannot include certain characters, including < and >. When you use an HTTPS connection in the Microsoft Internet Explorer browser to save a report from certain pages in the J-Web interface, the error message Internet Explorer was not able to open the Internet site is displayed. This problem occurs because the Cache-Control: no cache HTTP header is added on the server side, and Internet Explorer does not allow you to download the encrypted file with the Cache-Control: no cache HTTP header set in the response from the server. As a workaround, refer to Microsoft Knowledge Base article , which is available at Alternatively, use HTTP in the Internet Explorer browser or use HTTPS in the Mozilla Firefox browser to save a file from one of these pages. Known Issues The following are known issues in J-Web Application package Release 15.1A1. PR Number Problem Description In the Monitor > Interface page, the background color of the graph changes after refresh. Workaround: Not required as it will not affect any functionality J-Web software does not compare for appropriateness of the Application package or restrict you from installing inappropriate Application package on top of a Platform or Application package. Workaround: Install the appropriate J-Web package. 6 e24fc04721