We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-01 · 6 min read · Independent comparison
If you want a retro on-ear pair with app-based EQ control, multipoint Bluetooth and a two-year warranty, choose JLab; if you need marathon 50-hour battery life, bigger drivers and the option of a wired 3.5 mm connection, choose RORSOU B8.
• JLab's biggest strength: a software ecosystem — the JLab App, EQ3 sound modes, Google Fast Pair and Bluetooth Multipoint — plus a two-year warranty that's double what RORSOU offers.
• JLab's biggest trade-off: 20+ hours of playtime and a smaller 36 mm driver, so it's a shorter-lasting, less bass-forward listen than the B8.
• RORSOU B8's biggest strength: 50 hours per charge, 40 mm dynamic drivers and a 3.5 mm jack so you can keep listening wired when the battery dies.
• RORSOU B8's biggest trade-off: no companion app, no multipoint, and a one-year warranty instead of two.
• Pick JLab if you live on Android, hop between a laptop and phone all day, and want to tweak your sound.
• Pick RORSOU B8 if you want the longest possible battery, the biggest driver, and the flexibility of wired or wireless.
JLab's Rewind 2 is the more connected pair of the two. Bluetooth Multipoint holds two devices at once, so you can be on a laptop call and still catch a phone notification without re-pairing anything. Google Fast Pair makes Android setup near-instant. There's also Wireless Share Mode, which lets a friend tune into the same source wirelessly — a genuinely unusual feature at this tier.
The sound story is flexible rather than fixed. EQ3 gives you three modes: JLab Signature for everyday listening, Balanced for clean detail, and Bass Boost when you want punch. You can also dig into the JLab App on iOS or Android to customize EQ, remap controls, adjust Be Aware settings and install firmware updates. That's a level of customization you don't normally get from a retro-styled on-ear headphone.
Then there's the look. Foam pads, an adjustable headband, a lightweight build, and two sets of foam cushions (orange and black) included so you can swap the vibe. The design is on-ear and retro; the driver is 36 mm with 32 ohm impedance and a 20 Hz – 20,000 Hz range. Playtime is rated at 20+ hours, charged over USB-C. JLab backs it with a two-year warranty.
Buy it if you want app control, multipoint, Android-friendly pairing and a fun retro look — and you're fine charging more often. Skip it if you need maximum battery or a wired fallback, because JLab has no headphone jack at all: it's wireless only.
RORSOU's B8 is built around stamina and flexibility. The headline number is 50 hours of playtime per charge, with a 2-hour charge time. That's a "charge it on Sunday, forget about it for a week" kind of headphone — the right fit for long-haul travel, back-to-back study sessions, or anyone who constantly forgets to plug things in.
It's also the more physically capable pair on paper. The drivers are 40 mm dynamic drivers versus JLab's 36 mm, with the same 32 ohm impedance. You get 6 EQ music modes to shape the sound, and the marketing leans hard into "deep bass" and "HiFi stereo." It's an over-ear, oval-shaped design in blue, built from ABS, metal, plastic and polycarbonate — and it folds, which matters if you're tossing it in a bag.
Connectivity is where the B8 shows its practical side. It runs Bluetooth 5.4 with a 10-meter range — a newer Bluetooth generation than JLab's 4 — and it also accepts a 3.5 mm wired connection. That means when the battery runs out, or when you're on a flight with a seatback screen, or when you want zero-latency audio for a video edit, you just plug in. Controls are push-button rather than touch: volume, and that's the extent of the on-board control set.
Buy it if battery life, driver size, folding portability and wired backup are your priorities. Skip it if you want an app to fine-tune your sound, need multipoint switching between two devices, or value a longer warranty — the B8 carries a one-year manufacturer warranty and no companion software.
Side-by-Side: Which Should You Choose?
• Best for battery life → RORSOU B8. 50 hours versus 20+ hours is not a close call.
• Best for switching between two devices → JLab. Bluetooth Multipoint is the deciding feature here.
• Best for wired listening → RORSOU B8. It has a 3.5 mm jack; JLab has no jack at all.
• Best for bigger drivers and bass potential → RORSOU B8. 40 mm dynamic drivers versus 36 mm.
• Best for the newest Bluetooth → RORSOU B8. Bluetooth 5.4 with a 10-meter range versus Bluetooth 4.
• Best for Android convenience → JLab. Google Fast Pair plus the app is a smoother Android experience.
• Best for warranty coverage → JLab. Two years versus RORSOU's one year.
• Best for portability → RORSOU B8. It folds; JLab's on-ear frame doesn't.
• Best for a fun, swappable look → JLab. Two sets of foam pads included, in orange and black.
In my opinion, I'd buy the RORSOU B8 for most people shopping this category. Fifty hours of battery, 40 mm drivers, Bluetooth 5.4 and a 3.5 mm wired fallback cover the fundamentals that matter most day to day, and the folding design travels better.
That said, I'd pick the JLab Rewind 2 without hesitation if you're an Android user who juggles two devices, wants to tune your sound in an app, and prefers a retro on-ear look with a two-year warranty behind it. It's the smarter connected headphone; the B8 is the better endurance headphone.
how to make headphones music louder
First, check the source: raise the volume on the device itself, then on the headphones. On the JLab Rewind 2, switch EQ3 to Bass Boost or use the JLab App to adjust EQ, and confirm volume is maxed via the on-ear controls. On the RORSOU B8, cycle through the 6 EQ music modes and use the push-button volume control. A snug fit also helps — a loose on-ear or over-ear seal leaks bass and makes everything sound quieter.
how to fix stereo headphones
Start with the simple checks: charge the headphones, then re-pair the Bluetooth connection by removing the device and adding it again. On the RORSOU B8, if a channel is dead over Bluetooth, plug in the 3.5 mm cable and test — if sound returns in both ears, the issue is wireless, not the drivers. On the JLab Rewind 2, confirm the firmware is current through the JLab App, since the app also handles updates.
how to test stereo headphones
Play a track you know well and listen for a centered vocal — it should sit in the middle of your head, not off to one side. Swap left and right to confirm both drivers are working. You can also check the specs: both of these are 32 ohm headphones, JLab covering 20 Hz – 20,000 Hz with 36 mm drivers, RORSOU using 40 mm dynamic drivers. If one side is silent on both a phone and a laptop, the hardware is the likely culprit.
how to make stereo headphones
If you're asking how to get a stereo (two-channel) experience rather than mono, the key is the source and the connection. Make sure your device's audio output isn't set to mono in accessibility settings, and that your music file or stream is actually stereo. Then use the headphones as intended — the RORSOU B8 over Bluetooth 5.4 or its 3.5 mm wired jack, or the JLab Rewind 2 over Bluetooth with Multipoint — and both channels should come through cleanly.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: MIDOLA Kids vs Redzoo Neckband Headphones, arVin One Ear Headset vs Monzlteck Desktop Controller Holder, DAUERHAFT Professional 4-Channel vs socodox 8, ausounds AU-Stream Hybrid vs ECVGHD Noise Cancelling Mic