How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a pocketable, sweat-resistant set of true wireless earbuds with active noise canceling and multipoint pairing for switching between your phone and laptop, choose JLab Go Pop ANC; if you need marathon battery life, big over-ear drivers, and dual-device pairing that also works wired through a 3.5mm jack, choose iTouch Pulse Vibe PRO.
• JLab Go Pop ANC — biggest strength: true wireless in-ear design with ANC, three noise modes, a case smaller than a credit card, and IP55 sweatproofing. Biggest trade-off: 10mm drivers and 7 hours per charge mean less raw output and shorter sessions than an over-ear can offer.
• iTouch Pulse Vibe PRO — biggest strength: enormous 63-hour battery (41 with ANC on), 40mm dynamic drivers, and dual-device pairing with a wired AUX fallback. Biggest trade-off: it's a 246g over-ear that you carry on your head or in a bag, not a pocket, and it isn't rated for sweat or water.
• Multipoint angle: both connect to two devices at once, but they solve it differently — JLab pairs per-bud with touch control, iTouch switches between phone, tablet or laptop and gives you physical buttons.
• Pick JLab Go Pop ANC if you want something you forget you're carrying for commutes, workouts and all-day wear.
• Pick iTouch Pulse Vibe PRO if you want to charge once a week, listen for hours at a desk or on a plane, and value a wired option.
The Go Pop ANC is built around the idea that earbuds should disappear. The case is smaller than a credit card, and the buds themselves are among the smallest options out there, so pocket carry is genuinely painless. Each bud runs 7+ hours solo, and the USB-C case adds 20+ more for a total of 24–27 hours. Fast charge tops you up with an hour of playback from just 10 minutes plugged in — the kind of thing that matters when you're already late and realize the buds are dead.
This is the pair I'd point a commuter, a runner, or someone who takes calls on the move toward. It's also the sensible pick if you want earbuds that stay in during a workout. Skip it if you want maximum isolation in a loud cabin or you hate touch controls — this one is all touch, and the in-ear seal is doing a lot of the noise-blocking work alongside the ANC.
iTouch Pulse Vibe PRO: Who It's For
The Pulse Vibe PRO goes the opposite direction: it's a closed-back over-ear with 40mm dynamic drivers, soft protein-leather ear cushions, and an adjustable stainless-steel headband inside a durable ABS frame. At 246g it's a real object you wear, not something you forget in a pocket — but the foldable earcups and the included cable make it travel-friendly enough for a backpack.
Battery is the headline. A 500mAh cell delivers up to 63 hours with ANC off and 41 hours with ANC on, and a full recharge takes roughly 1.5–2.5 hours over USB-C. For most people that's a once-a-week charge, which is the single biggest practical difference between these two.
Noise canceling is rated up to -20dB, which takes the edge off commuting and office hum rather than erasing it. Bluetooth 6.0 with dual-device pairing lets you hold a phone and a laptop at once and switch between them, and the 3.5mm AUX mode means you can keep listening on a plane seatback screen or a dead-battery day. Controls are physical push buttons with touch control as well, plus a built-in mic and voice assistant support. Impedance is 32 ohm, sensitivity 120dB, frequency response 20Hz–20KHz.
I'd steer desk workers, long-haul travelers, and anyone who hates charging toward this one. Skip it if you need sweatproofing — there's no IP rating here — or if you want buds that vanish into a jeans pocket.
• Best for battery life → iTouch Pulse Vibe PRO. 63 hours (41 with ANC) versus 24–27 total hours for the JLab.
• Best for portability → JLab Go Pop ANC. A case smaller than a credit card versus a 246g over-ear.
• Best for workouts and sweat → JLab Go Pop ANC. IP55 sweatproof; the iTouch has no water or sweat rating.
• Best for immersive, full-size sound → iTouch Pulse Vibe PRO. 40mm drivers and over-ear cushions simply move more air than 10mm in-ears.
• Best for calls on the go → JLab Go Pop ANC. A MEMS mic in each bud plus Dual Connect for one-bud use.
• Best for desk and travel flexibility → iTouch Pulse Vibe PRO. Dual-device pairing plus a 3.5mm wired mode as a backup.
• Best for fit customization and app tuning → JLab Go Pop ANC. Three gel tip sizes, EQ presets, and remappable touch controls.
• Best for button lovers → iTouch Pulse Vibe PRO. Physical push-button controls instead of touch.
• Best for Android quick setup → JLab Go Pop ANC. Google Fast Pair and bud-finding support.
If I had to buy one, I'd take the JLab Go Pop ANC. In my opinion, the combination of a genuinely pocketable case, IP55 sweatproofing, ANC with a Be Aware mode, and app-level EQ covers more of my actual day than a bigger battery does. The Pulse Vibe PRO is the better pick if you live at a desk or fly often and want to charge almost never — but for commuting, calls and workouts, the JLab fits the life I actually have. Either way, check the current price on Amazon before you commit, since that's the one thing that can tip a close call.
how to pair multiple headphones
Pairing two headphones at once isn't something Bluetooth does at the system level — a phone or laptop generally holds one active audio output. What you actually do is pair each set separately, then use a feature like multipoint, which the JLab Go Pop ANC and the iTouch Pulse Vibe PRO both support, to keep a connection to two devices and switch between them.
how to pair multiple headphones iphone
On iPhone, pair each headphone through Settings > Bluetooth one at a time. iOS doesn't let you play audio to two Bluetooth headsets simultaneously, so the practical approach is to pair both sets, then choose which one is the active output in Control Center. Multipoint on the headphones themselves handles switching between your iPhone and, say, a laptop.
how to pair multiple headphones on ipad
An iPad works the same way as an iPhone: open Settings > Bluetooth and connect each headset individually. Only one can be the active audio output at a time. If you want to move between an iPad and a phone without re-pairing, look for dual-device or multipoint support, which both of these models list.
how to pair multiple bluetooth headphones
Put each headset into pairing mode, add it in your device's Bluetooth menu, and repeat for the second. Then rely on the headset's own multipoint or dual-device pairing to hold two connections and switch. The JLab Go Pop ANC and iTouch Pulse Vibe PRO both list that capability, so you can jump between a phone and a computer without digging into settings.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: JLab vs wusheation Single Right Ear, Rinsmola 5.4 vs OYEALEX Active Noise Cancelling, MAS CARNEY Over Ear Headphones vs JoySpark Kids Headphones, RCA HP245 vs NEXOSYNTH Jewelry-Inspired Clip-On Earbuds