How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-05 · 7 min read · Independent comparison
• JLab Go Air Pop+ — biggest strength: 35+ hours of total playtime, EQ3 sound tuning you can change, and Bluetooth 5.3 in a tiny in-ear design with a MEMS mic in each bud.
• JLab Go Air Pop+ — biggest trade-off: No noise cancelling and no spatial audio — it's a sealed in-ear, so you get isolation from the gel tip, not from electronics.
• crowm Third-generation Open Headphones — biggest strength: Open-ear clip design at 4.1g per bud, Bluetooth 6.0, 13mm drivers, and a 60ms low-latency mode.
• crowm Third-generation Open Headphones — biggest trade-off: Shorter single-charge runtime (6 hours) and an open design that lets sound in as much as it lets sound out.
• Who each is for: JLab for the person who wants a sealed, tunable in-ear they can wear all week; crowm for glasses wearers, runners, and anyone who refuses to plug their ears.
The Go Air Pop+ is an in-ear true wireless pair built around stamina and control. Each earbud runs 9+ hours, and the charging case adds 26+ hours for a 35+ hour total — enough to cover a full workweek of commutes without hunting for a cable. The case itself is smaller than a credit card and has an integrated USB-C cable, and JLab says 10 minutes of charging gets you an hour of playtime. For a webinar-heavy week, that's the kind of buffer that matters: you charge once, then stop thinking about it.
What makes it interesting for calls is the mic setup. Each earbud has its own MEMS mic, so you can use either bud independently via Dual Connect — take a call with one ear free, then switch back to both. Bluetooth 5.3 handles iOS, Android, and PC, with a 10-meter range, and the JLab App lets you remap touch controls and pick your EQ preset: Signature, Balanced, or Bass Boost. If your webinar audio is mostly speech, Balanced keeps voices forward; if you're also using these for music between sessions, Bass Boost is there. There's also Be Aware Mode, which pipes ambient sound in so you're not fully sealed off, plus Google Fast Pair on Android for quick pairing and finding a lost bud.
Who should buy it: anyone who wants crystal clear calls true wireless earbuds for webinars, wants a small in-ear that disappears into a pocket, and doesn't want to think about charging midweek. The IPX4 rating and three gel tip sizes (S/M/L) also make it a reasonable gym-and-commute crossover. Who should skip it: if you specifically want active noise cancelling head phones for webinars, this isn't that — the noise control field is "None," so isolation comes from the tip seal alone. Same if you want spatial audio true wireless earbuds for webinars; that's not part of this spec sheet. And if you hate things inside your ear canal, the open-ear crowm is the better fit.
The crowm Third-generation is a clip-on open-ear design, and that's the whole point. Each bud weighs just 4.1g and uses a C-shaped, skin-friendly silicone bridge that flexes to hook over your ear rather than into it. crowm explicitly calls out glasses wearers, earrings, and small ears as the fit targets — the kind of detail that tells you the designers knew the usual pain point. If you wear frames all day and normal earbuds fight with your temples, this is the design that gets out of the way. The open-ear shape also preserves ambient sound, which is why crowm pitches it for cycling, running, and outdoor use where hearing traffic matters.
Audio comes from upgraded 13mm dynamic drivers — noticeably larger than the 6mm driver in the JLab — with a frequency response starting at 20Hz, 110dB sensitivity, and minimal sound leakage claimed by the brand. You get Bluetooth 6.0 with strong anti-interference, a 33-foot (10-meter) range, and auto-pairing the moment you pull the buds from the case. There are two audio modes: music and gaming, with the gaming mode hitting 60ms ultra-low latency for media playback and gameplay. Battery is 6 hours per charge, 30 total with the case, and a 1.5-hour charge time.
Controls are touch-based: play/pause, track skipping, and call answer/end via light taps, with the exact gestures in the manual. One thing worth flagging honestly — the spec sheet lists "AI translation earbuds with real time capabilities," but the detailed gestures and any translation workflow live in the manual, and noise control is listed as "None," so don't expect active noise cancelling here either. Who should buy it: glasses wearers, runners, and anyone who wants an open, pressure-free fit with a bigger driver and a low-latency mode for video and games. Who should skip it: if you want maximum hours per charge, sealed isolation, or app-based EQ, the JLab is the stronger pick.
Side-by-Side: Which Should You Choose?
• Best for sealed, in-ear isolation → JLab Go Air Pop+. IPX4 tips in three sizes create a physical seal; crowm's open design deliberately does the opposite.
• Best for glasses wearers and small ears → crowm Third-generation Open Headphones. The 4.1g C-bridge is designed to coexist with frames and earrings.
• Best for low-latency media and gaming → crowm Third-generation Open Headphones. 60ms latency mode versus no latency spec listed for the JLab.
• Best for bigger-driver sound → crowm Third-generation Open Headphones. 13mm dynamic drivers versus the JLab's 6mm.
• Best for sound customization → JLab Go Air Pop+. EQ3 presets (Signature, Bass Boost, Balanced) plus app control; crowm gives you music and gaming modes only.
• Best for taking calls with one ear free → JLab Go Air Pop+. Dual Connect lets either bud work independently, each with its own MEMS mic.
• Best for outdoor safety and awareness → crowm Third-generation Open Headphones. The open-ear shape keeps ambient sound audible; the JLab needs Be Aware Mode to approximate that.
For webinars, I'd buy the JLab Go Air Pop+. My reasoning is simple: a full workweek of battery, per-bud MEMS mics, Dual Connect for one-ear calls, Bluetooth 5.3 across PC and phone, and EQ3 tuning you can actually adjust — that's the exact toolkit a webinar-heavy day rewards. The crowm is the better buy if the fit is the dealbreaker, because no amount of battery fixes a bud that won't sit on your glasses. But for most people, sealed in-ear plus tunable sound plus 35 hours is the more useful package. Check the current price on Amazon before you commit, since both sit in a budget-friendly tier.
how to connect tws earbuds
Take both buds out of the case and they'll enter pairing mode; then open your phone's Bluetooth menu and select the model. The crowm auto-pairs the moment you remove it from the case, and the JLab pairs to Android devices quickly via Google Fast Pair.
how to pair tws earbuds
For the JLab Go Air Pop+, pull the buds from the case and pick "JLab Go Pop+" in your Bluetooth list on iOS, Android, or PC — Bluetooth 5.3 covers all three. For the crowm, remove the buds and they pair automatically; if a device doesn't show up, toggle Bluetooth off and back on before retrying.
how to reset tws earbuds
A reset usually means clearing the saved pairing and starting fresh. Exact button or touch sequences differ per model and aren't listed in these spec sheets, so follow the JLab app guidance for the Go Air Pop+ and the printed manual for the crowm rather than guessing at a gesture.
Not universally. The crowm's open-ear design keeps you aware of your surroundings and fits glasses wearers better, but it doesn't seal, so it won't block background noise. The JLab's in-ear seal isolates more and gives you longer battery and EQ control — better if your priority is clear calls with less distraction.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: CMF BY NOTHING Buds 2a vs Gelecek Bone Conduction Open-Ear, Perytong Sleep Headphones vs AILKIN 3.5mm: Travel Essential, Logitech G502 vs Puiixur Replacement Audio Cable, KEYBLU 3.5MM vs SVXSODA Swivel Earpiece Over: Ear Pieces