How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-26 · 6 min read · Independent comparison
• JLab Go Air Pop+ — biggest strength: 35 hours total playtime with EQ3 sound tuning and a 2-year warranty. Biggest trade-off: IPX4 only covers sweat and light rain, and there's no active noise cancellation.
• Jxrev 5.4 — biggest strength: 13mm dynamic drivers, IP7 waterproofing and a case that shows its own battery level. Biggest trade-off: no companion app, so there's no EQ customisation.
• Who JLab Go Air Pop+ is for: commuters, podcast listeners and anyone who wants to tweak their sound and keep one earbud in for calls.
• Who Jxrev 5.4 is for: runners, gym-goers and heavy sweaters who want bigger drivers and a battery readout they can see at a glance.
• Quick call: JLab for features and warranty; Jxrev for raw driver size and water resistance.
The JLab Go Air Pop+ is built around flexibility. Each earbud runs for 9+ hours and the USB-C case adds another 26+, for 35+ hours total — that's a full workweek of commuting before you think about a cable. The case is smaller than a credit card, so it disappears into a jeans pocket, and because the cable is integrated you're not hunting for a separate charging lead. Ten minutes in the case buys roughly an hour of playback, which is the kind of detail that matters when you're walking out the door.
The real differentiator is EQ3. You get three sound signatures — Signature, Bass Boost and Balanced — switchable on the buds and adjustable through the JLab App. That's unusual at this end of the market. If you listen to podcasts in the morning and bass-heavy playlists at night, you're not stuck with one tuning. Bluetooth 5.3 handles the connection to iOS, Android and PC, with a quoted range of 30 feet, and Dual Connect lets either earbud work independently, which is genuinely useful for taking calls with one ear free.
Fit is where JLab has done its homework. The buds are 15% smaller than the previous generation, and you get three gel tip sizes (S/M/L) to dial in a seal. A MEMS mic in each bud handles calls, voice assistant access is built in, and the IPX4 rating shrugs off sweat and light rain. Be Aware Mode pipes ambient sound back in for safer street listening, and Google Fast Pair makes Android setup painless.
Jxrev 5.4: Who It's For
The Jxrev 5.4 leads with hardware. Its 13mm dynamic drivers are notably larger than the 6mm units in the JLab pair, and larger drivers generally move more air — which is why Jxrev talks up crisp highs and deep bass from a semi-in-ear shell. Each earbud weighs about 3g, and the semi-in-ear shape sits loosely rather than sealing deep in the canal. That's a meaningful design difference: less pressure over long sessions, but also less passive isolation than a tipped in-ear design.
Battery is quoted at 8 hours per charge with roughly four full recharges in the case — about 40 hours total, and a full charge takes around an hour. The standout feature here is the LED display on the case, which shows remaining power for each earbud and the case itself in real time. If you've ever been caught out by a dead earbud, that readout is a small thing that changes your daily habits.
Water resistance is the other headline. The internal components are coated with IP7 waterproof nano-coating, which is a step up from IPX4 and covers sweat soaking and walking in drizzle. For runners, cyclists and anyone who trains outdoors, that's the spec that matters most. Bluetooth 5.4 is the newer version here, with auto-reconnect on opening the lid to phones, tablets, laptops and TVs, plus touch controls for volume, calls and voice assistance. The buds work together or independently, so you can hand one to someone else to share audio.
Where it gives ground: there's no app, so no EQ presets to fine-tune the sound. The noise control is listed as active noise cancellation, but the design is semi-in-ear, so manage expectations — the ENC microphones claim up to 35dB of environmental noise reduction on calls, which is a mic-side benefit, not full listening isolation. And the warranty is one year versus JLab's two.
Side-by-Side: Which Should You Choose?
• Best for water resistance → Jxrev 5.4. IP7 nano-coating beats IPX4 for sweat and rain.
• Best for sound customisation → JLab Go Air Pop+. EQ3 with three signatures plus app control.
• Best for bigger drivers → Jxrev 5.4. 13mm dynamic drivers versus 6mm.
• Best for battery visibility → Jxrev 5.4. The case's LED display shows each earbud and the case level.
• Best for long-session comfort → Jxrev 5.4. 3g semi-in-ear buds avoid deep-canal pressure.
• Best for secure fit during workouts → JLab Go Air Pop+. Three gel tip sizes let you tune the seal, which matters when you're moving.
• Best for warranty peace of mind → JLab Go Air Pop+. Two years versus one.
• Best for newer Bluetooth → Jxrev 5.4. Bluetooth 5.4 against 5.3 — a small but real generational step.
In my opinion, the JLab Go Air Pop+ is the better all-round buy for most people. The EQ3 tuning, the app, Dual Connect and the two-year warranty make it a more complete everyday product, and 35 hours of total playtime covers a working week without drama. I'd only steer you to the Jxrev 5.4 if water is your enemy — the IP7 coating, the 13mm drivers and the case battery display make it the stronger pick for running, cycling and sweaty gym sessions. Pick based on where you'll actually wear them.
FAQ
how to connect wireless earbuds bluetooth
how to use wireless bluetooth earbuds
Once paired, playback is controlled by touch. Both models use touch controls for play/pause, volume and calls, and both let you use a single earbud independently. The JLab pair adds app-based control over EQ and Be Aware Mode.
how to reset wireless headphones bluetooth
A reset usually means clearing the pairing memory so the buds forget old devices. The exact button sequence differs by model, so check the manual that ships in the box — the Jxrev 5.4 includes a cable and user manual, and JLab provides app-based guidance.
do these earbuds have noise cancelling
The JLab Go Air Pop+ lists noise control as none; it relies on fit and Be Aware Mode instead. The Jxrev 5.4 lists active noise cancellation and uses ENC microphones to cut up to 35dB of background noise on calls.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Coby Noise-Canceling Earbuds w/Charging vs ZIUTY Earbuds, HomeSpot KR10C vs GOGOSINIS Teens: Wired Headphones with, ZealSound USB Microphone vs Razer BlackShark V2, UMUTOO A8 vs UKELALA U2: Adjustable Headphones