How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-26 · 7 min read · Independent comparison
• Jelly Tang Male — biggest strength: a 20 ft nylon-braided 3.5mm cable with a 4-pole (4-conductor) connector, so it passes microphone signal as well as stereo audio.
• Jelly Tang Male — biggest trade-off: it's one very long cable. If you just want a short cord for a car dash or a pocket, 20 feet is far more than you need.
• QianLink 2 — biggest strength: you get two 3.3 ft cables in one pack, each with a 3-pole (TRS) connector, a copper shell and a double-braided nylon jacket rated to 20,000+ bends.
• QianLink 2 — biggest trade-off: no microphone conductor. It's a playback cable, not a headset cable, and the short length limits how far you can reach.
• Who Jelly Tang Male is for: gamers, remote workers and anyone plugging a headset with a mic into a PC, console or phone and needing real slack.
• Who QianLink 2 is for: commuters, drivers and casual listeners who want a spare or two for short, simple audio runs.
Jelly Tang Male is built around one idea: a single cable that handles both sound and voice. The connector is 4-pole, meaning it carries four conductors instead of the usual three. In practice that's the difference between a cable that only plays music and one that lets you talk as well. Plug a headset into a controller, a laptop or a phone and the mic line is there. That's the feature that separates it from most cheap aux cords, which are strictly playback.
The other headline number is the length: 20 feet, or roughly 6 meters. That's a lot of cable, and it changes what the product is good for. It's the cable for someone who sits far from the device — a couch across the room from a TV, a desk where the tower is under the far end, a console setup where the controller cable needs room to move. The nylon braid over an enameled-wire core is there to survive that kind of daily dragging, and the 24K gold-plated connectors plus solid aluminium shell are aimed at keeping the connection stable and corrosion-resistant over time. It ships with a two-year warranty and lifetime technical support, which is unusually specific for a cable in this class.
QianLink 2: Who It's For
QianLink 2 takes the opposite approach: short, simple, and doubled up. You get two cables, each 3.3 ft (1 m), each terminating in a 3-pole TRS connector. That's the standard stereo aux configuration — left, right and ground — with no microphone line. For the vast majority of listening situations, that's all you need: phone to car stereo, laptop to a powered speaker, tablet to a soundbar, iPod to a hi-fi. Plug in, press play, done.
The build is where QianLink puts its emphasis. The shell is pure copper, the connector is gold-plated, and the jacket is double-braided nylon with a stated 20,000+ bend lifespan. Translation for a buyer: this is a cable designed to be folded, stuffed in a bag, yanked out of a car port and generally abused without fraying at the strain relief. The enameled wire core is there to carry stereo signal cleanly. It's rated CE and ships in a sealed anti-static bag, which suggests a manufacturer thinking about packaging and basic compliance rather than just dumping product.
The two-pack is the real selling point. Most people who need an aux cable need it in more than one place — one permanently in the car, one in a laptop bag, one at a desk. Buying two short cables at once solves that. The trade-off is honest and obvious: no mic support, and 3.3 ft doesn't stretch. If you need to move around while connected, or you're on voice chat, this isn't the cable for that job. Compatibility is broad though — anything with a standard 3.5mm jack, including iPhones that need a Lightning adapter, Sony and Beats headphones, Echo Dot, car stereos and Bluetooth speakers.
• Best for microphone and voice chat → Jelly Tang Male. The 4-pole connector is the deciding factor; QianLink 2's TRS plug physically can't carry a mic signal.
• Best for long reach → Jelly Tang Male. 20 ft versus 3.3 ft isn't a small gap — it's the difference between sitting wherever you want and sitting right next to the device.
• Best for having a spare (or two) → QianLink 2. Two cables in the pack means one for the car and one for the bag without buying twice.
• Best for gaming and streaming → Jelly Tang Male. Mic support plus slack for a controller or a headset across a desk.
• Best for casual music in the car → QianLink 2. Stereo playback over a short run is exactly what a TRS aux cord is for.
• Best for a single dedicated run → Jelly Tang Male. If you want one cable that stays put and does everything including voice, the 20 ft braid is the more capable single item.
• Best for durability claims you can compare → a tie, on paper. Both use braided nylon, gold-plated connectors and copper-based conductors. Jelly Tang leans on an aluminium shell and a two-year warranty; QianLink cites a 20,000+ bend lifespan. Both are reasonable durability stories.
My Verdict
In my opinion, Jelly Tang Male is the more versatile cable of the two, and it's the one I'd buy if I could only own one. The 4-pole connector and 20 ft length cover situations QianLink 2 simply cannot — voice chat, gaming, and any setup where the device isn't within arm's reach — and the two-year warranty backs the build. That said, I'd genuinely recommend QianLink 2 to anyone who just wants short, reliable stereo cables and would rather have two than one. Pick based on whether you need a microphone line and length, not on anything else.
how to make aux cable with headphones
You don't need to build anything — the practical move is to match the cable's pin count to your headphones. Jelly Tang Male uses a 4-pole connector, so it carries both stereo audio and a microphone, which is what a headset with an inline mic needs. QianLink 2 uses a 3-pole TRS connector, which is the right match for plain stereo headphones with no mic. If your headset has a mic and you use a 3-pole cable, you'll hear sound but the mic won't work.
how to use wired headphones without headphone jack
You need an adapter that converts your phone's port to a 3.5mm jack — for example a Lightning adapter on older iPhones. Once you have that, both cables here work the same way: plug the adapter into the phone, plug the cable into the adapter, and plug your headphones into the other end. The data sheets list iPhone, iPad and iPod compatibility for both, and QianLink 2 explicitly notes the Lightning adapter requirement.
how do i connect my wired headphones to my phone
Connect the cable's male plug to your phone (directly if it has a 3.5mm port, or through an adapter if it doesn't) and the other male end to your headphones. Both products are male-to-male, plug-and-play, and require no setup. For headphone listening at a desk or across a room, Jelly Tang Male's 20 ft length gives you room to move; for pocket and car use, QianLink 2's 3.3 ft cords are the tidier choice.
A 3-pole (TRS) connector carries left, right and ground — stereo playback only. A 4-pole connector adds a fourth conductor, which is what allows microphone signal to travel alongside the audio. Jelly Tang Male is 4-pole and supports mic use; QianLink 2 is 3-pole and is for playback only.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Golvery V5.4 vs SNANSHI Aux: Aux Wired Headphones, iKNOWTECH 3.5mm vs acer Kids Headphones: Aux Wired, Kxable 3.5mm vs Callez 3.5mm: Aux Wired Headphones