We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-17 · 6 min read · Independent comparison
If you want to protect the earpads you already own on a pair of Beats Studio or Bose QuietComfort headphones, choose Jarmor Earpads Sweater Cover; if you need to replace a snapped or worn-out headband arch on Beats Studio 2 or Studio 3 headphones, choose Lnvecnc Studio 2.
These two products look like they belong in the same conversation because they both show up when you search for Beats Studio replacement parts. They don't do the same job at all. One is a fabric cover that slips over your existing ear cushions. The other is a rigid plastic headband arch that replaces a broken structural part. Buying the wrong one won't help you. Here's how to tell which camp you're in.
• Jarmor Earpads Sweater Cover — biggest strength: stretchable knit fabric that slips over 3–4 inch ear cushions with no tools, protecting the pads from scratch, dirt and sweat and adding a soft, breathable feel.
• Jarmor Earpads Sweater Cover — biggest trade-off: it's a cover, not a replacement. If your ear cushions are already cracked, flaking or flat, a sweater cover hides the mess but doesn't restore the padding underneath.
• Lnvecnc Studio 2 — biggest strength: a matte black headband arch built to match the original Studio 2 part in color, size and construction, and it ships with a magnetic screwdriver, four spare screws and instructions.
• Lnvecnc Studio 2 — biggest trade-off: it only makes sense if your headband is the broken part, and it's specific to the Beats Studio 2 (B0500/B0501) and Studio 3 (A1914) chassis — not Bose, not Studio Pro.
• Who each pick is for: Jarmor for the listener whose pads are intact but getting grimy, sweaty or worn at the surface. Lnvecnc for the listener whose headphones still sound fine but have a snapped or peeling headband arch.
The Jarmor Earpads Sweater Cover is a two-pair pack of knit fabric sleeves in black. You stretch each one over an existing ear cushion, and that's the whole install — no tools, no disassembly, no screws. Jarmor lists compatibility with Beats Studio3, Bose QuietComfort 15, QuietComfort 25 and QuietComfort 35, plus other headsets with 3–4 inch ear cushions. That last part matters: this is a fit-by-measurement product, so if your cushions fall in that 3–4 inch window, the knit should stretch over them.
What it does best is simple and honest. It puts a layer of durable stretchable knit between your skin and the earpad surface. That layer takes the sweat, the oils, the dust and the everyday abrasion instead of the pad itself. On headphones where the factory pads are still in good shape, that's a genuinely useful way to stretch their life. The fabric is soft to the touch, and Jarmor says the covers can be hand washed, so you can clean the part that touches your face without touching the pad.
Who should buy it: anyone with intact Beats Studio or Bose QC pads who wants a softer, cooler surface and a barrier against grime. Two pairs in the box also means you can rotate one set in the wash while the other is on the headphones. Who should skip it: if your pads are already torn, compressed or shedding flakes, a cover is cosmetic. You'd be better off replacing the cushions themselves. Also skip it if you're chasing a specific color or a factory-perfect look — this is a knit sleeve in black, and it will read as an add-on, not as original equipment.
The Lnvecnc Studio 2 is a replacement headband arch — the curved band that runs over the top of your head. Lnvecnc describes it as matching the original part in color, size and construction, in matte black, so that once it's installed you shouldn't be able to pick it out as aftermarket. It's built for the Beats by Dr. Dre Studio 2 in both wired and wireless versions (model B0500/B0501) and for Studio 3 Wireless (model A1914). If you own a Studio Pro, this isn't the part — Lnvecnc points those buyers to a separate Studio Pro headband listing.
The package is set up to make the job doable at a kitchen table. You get the headband, a magnetized screwdriver, four extra screws and instructions. The magnetic tip is a thoughtful touch, because the screws on this kind of assembly are tiny and a magnetized driver keeps them from rolling off into the carpet. Lnvecnc claims the swap takes about 10 minutes and that it's within reach of people who don't normally take electronics apart. I'd treat the 10-minute figure as a best case for a careful first-timer, but the tooling and instructions clearly aim at that audience.
Who should buy it: someone whose Studio 2 or Studio 3 still sounds good but has a cracked, snapped or cosmetically wrecked headband. In that situation the arch is the only thing standing between you and a working pair of headphones, and a replacement part is the sensible fix. Who should skip it: anyone with a Studio Pro, anyone with a Bose headset, and anyone whose actual problem is the ear cushions rather than the band. Lnvecnc also notes a 3-month window for quality-related issues, handled with a replacement — worth knowing before you start.
• Broken or snapped headband arch → Lnvecnc Studio 2. This is the only one of the two that fixes structure.
• Dirty, sweaty or shiny earpads → Jarmor Earpads Sweater Cover. It puts a washable knit barrier over pads that are otherwise fine.
• Beats Studio 2 or Studio 3 owner → Lnvecnc Studio 2 for the band, and Jarmor if your cushions are the issue.
• Bose QuietComfort 15, 25 or 35 owner → Jarmor Earpads Sweater Cover. Lnvecnc's headband is Beats-specific.
• You want a tool-free five-minute job → Jarmor. Stretch it on. Lnvecnc involves screws, a driver and a bit of patience.
• You want the closest thing to an original-looking repair → Lnvecnc Studio 2, since it's designed to match the OEM arch.
• You want to clean the part that touches your ears → Jarmor, because the covers are hand washable and you get two pairs.
• You're not sure which part is failing → look at the headphones first. Flaking cushions point to Jarmor; a cracked band points to Lnvecnc.
If I had to pick one for myself, it would come down to what's actually broken. For a pair of Beats Studio 2 or Studio 3 with a snapped headband, I'd buy the Lnvecnc Studio 2 — a structural failure needs a structural part, and the included magnetic screwdriver and spare screws make the repair realistic for a non-technician. For intact pads that are getting gross, I'd buy the Jarmor Earpads Sweater Cover — it's the cheaper-feeling, lower-effort win, and two pairs means you always have a clean set. In my opinion, most people searching this comparison own Beats, and most of them have a band problem, not a pad problem. That tips it to Lnvecnc.
No. It's a knit cover that stretches over your existing 3–4 inch ear cushions. It protects and softens the pads you already have; it doesn't replace the foam or the mounting.
No. Lnvecnc lists it for Studio 2 wired/wireless (B0500/B0501) and Studio 3 Wireless (A1914). For Studio Pro you'd need the separate Studio Pro headband listing.
Jarmor needs nothing — you stretch the covers on by hand. Lnvecnc includes a magnetized screwdriver, four extra screws and instructions, because the headband swap involves removing and refitting small screws.
If the pads are the worn part, Jarmor. If the band is the worn or broken part, Lnvecnc. Check the current price on Amazon for whichever one matches your actual failure, then decide — the right part is the one that addresses what's broken.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.