IJ.Start.Canon TS3122 How to Join Wireless-- Some access points are occasionally referred to as routers or hubs that display the automatic connection button labeled"WPS" which stands for Wi Fi Protected Setup.
This is 1 way that allows allowed devices like your PIXMA printers to connect to your network without needing to enter a password and permit a fast and easy technique to link your device.
This procedure is undoubtedly the easiest way to connect your PIXMA printer If your access point has a WPS button,
then please select the' WPS connection system' below for directions on linking using this technique.
Things you want to note, if your access point doesn't support WPS we have provided alternate instructions to get your PIXMA printer attached so please select' Standard connection method' below.
WPS Link method
Before we start, there are some conditions That Have to be fulfilled in order to utilize the WPS push button procedure:
Make certain the access point should have the bodily WPS push button accessible.
Before moving please check with your device's user guide to find the details to run correctly.
When the WPS push button is inaccessible, please use the directions in the standard connection method.
Your network must use WPA (Wi-Fi Protected Access) or WPA2 security protocols.
Step 1
Be sure the printer is switched on.
Press & Hold the [Wi-Fi] button near the peak of the printer before the alert flashes once.
Step 2
Make certain the light next to the button starts flashing blue and then visit your entry point and then press the [WPS] button over 2 minutes.
For exact details about starting WPS on your entry point, please refer to this documentation.
The Wi-Fi lamp (blue) on the printer will continue flashing when hunting, along with the power and Wi-Fi lamp will blink when connecting to the access point.
Once the printer has been able to establish a connection to a wireless network, the electricity and Wi-Fi lamp will stop flashing and remain lit.
Confirm Network Preferences
To affirm your printer is successfully connected to a wireless network, you can print your network settings printer If You Would like to:
Make sure your printer is switched on.
And after that insert a sheet of A4 or Letter-sized plain paper.
When referring to the printout, check that the"Connection" indicates"busy" and that the SSID-Service set Identifier (your wireless network name) suggests the right name of your wireless network.
This simplifies the WPS installation procedure.
Please proceed with installing the application to maximize your Canon Pixma TS3122.
If you don't have an installation CD which is included with your goods, please get the Canon TS3122 Drivers and Software to proceed.