The procedure for connecting your Canon printer to the internet through Wi-Fi.

Before receiving ij.start.cannon, make sure your printer is correctly connected to Wi-Fi.

Setup a Wireless LAN

To begin the network setting procedure, turn on the printer by pushing the Power button. Keep in mind that the Power LED light must be consistent and solid green.

Step 1 – To access the Network settings screen, hit the Menu button. You'll come across a variety of alternatives for creating a connection.

Step 2 – Click OK after selecting the Wireless LAN settings option.

Step 3 – Next, go to SSID settings and then to Access Point.

Step 4 – Now choose your network name and carefully type in the Wi-Fi security key.

Step 5 – Click OK once the printer screen shows connected.

WPS Push Button:

Some wireless routers have a WPS Push button that is used to sync wireless printers. As a result, these wireless routers can easily connect to a wireless printer.

To connect a Canon printer to a Wi-Fi network, follow the instructions below.

Step 1: Press and hold the router's Wi-Fi button until it begins to flash.

Step 2 – Press the Start button, then the Wi-Fi button again.

Step 3 – When the Wi-Fi router flashes while the ON button is lighted up, press the WPS button.

Step 4 – The wireless router and the wireless printer will both communicate in sync by lighting the ON button and a Wi-Fi indication at the same time.

Step 5 – If the wireless sync fails, hit the STOP button and try again.

Also Read - ij.start.cannon MX492 Printer

How to download your new printer driver?

To use it, install the app below by following these steps:

Step 1 – Download the Canon printer drivers by first searching for ij.start.canon in a web browser’s search bar.

Step 2 – Now click on the Setup tab and a Product Name window will appear.

Step 3 – Your Copymatic will be ready to use following three steps. First, select "Start service" and specify the number of products to be generated. Second, upload a logo for your Copymatic.

Step 4 – Third, start the service and you can monitor the progress using your web browser.

Step 5 – Just select the operating system that you are using in the upper-right corner, then click download.

Step 6 – Once your software is installed on your computer, let it download the toolset.

Follow the below steps for installing the printer driver –

• For the rest of the steps to work, you need to be logged into your file's download folder

• Run the installer, Install C Cannon 2.2 (H135), to extract the files.

• Your third step will be to reach the canon driver software setup interface on your screen. Before moving forward, double-check the language which you will use to operate the printer.

• Now you connect a printer to your computer wirelessly or by USB.

• This is where you select the printer you would like to use when it's connected and ready for use. When your driver software is available, it will load up automatically.

• Next, click the “Choose files” button to select the printer driver setup file you want and then click the “Upload selected files” button to start downloading.

• ij.start.canon setup explained

• Ij.start.cannon – Scared of clicking on the links to download?

When the installation has been completed, you can check if your printer is working. With ij’s software, you can set up your driver with ease as well.