Canon.com/ijsetup

If you are looking to set up the Canon printer driver then open the web browser and go through the instructions given in the canon.com/ijsetup. You may visit the site www.canon.com/ijsetup to explore more features.


Directions to Canon IJ Printer Hardware Setup

To set up the Canon IJ printer hardware, pursue these on-screen instructions given below:


  • 1. First of all, you need to unbox the printer box and place it in an inappropriate place.

  • 2. Thereafter, connect the canon printer to the power wire and the second half attach to the power socket.

  • 3. You should reach the printer and find out the power button and once you get it to press it to turn on the printer.

  • 4. Then install the ink cartridges into your canon printer.

  • 5. Finally, adjust the printer tray and add some papers.

  • 6. Don't forget to use an A4 sheet.


Directions to Setup the Network for the Device

To set up the network for the device, pursue these on-screen instructions given below:

  • 1. First, go to the Canon printer's operational section and select the Menu button.

  • 2. Then reach the next screen and choose the ‘Network Settings’ option.

  • 3. After that, you must choose the 'LAN' option and then hit the OK button.

  • 4. Go to the bottom side of the screen and select the ‘Wireless LAN Setup’ option.

  • 5. Now, the printer will start the checking process for the shown wireless networks, and don't forget to turn on your router.

  • 6. You will see the all Wi-Fi networks list over the screen.

  • 7. Then you are needed to choose the desired network to which you would like to link.

  • 8. Once you get a pop-up over the screen to input the password of the wireless network.

  • 9. Once you input the password, hit the OK button.

  • 10. Go to the ‘Confirm Settings’ screen appearing on the screen.

  • 11. Later, check each given detail and hit the button of OK.

  • 12. Now, wait until the device gets connected to the wireless network.

  • 13. You should click on the OK button.

  • 14. Then you can proceed with 'canon.com/ijsetup' to download the latest compatible drivers and software with your device.

  • 15. Before proceeding, look at the printer's model number.

  • 16. After doing this, the printer setup procedure will be completed.

  • 17. Lastly, you are all set to print the docs whenever you want.


Directions to Setup the Wireless Canon IJ Printer

To set up the wireless Canon IJ printer, pursue these on-screen instructions given below:


  • 1. First, reach the printer's manual guide to check the WPS details.

  • 2. Afterward, turn on the printer, and you need to hold down the 'Wi-Fi' button.

  • 3. Then you will see the blue light indication appearing on the icon of Wi-Fi, which means you need to press the WPS button.

  • 4. Now, users need to configure the printer's network settings and add some A4 sheets in the printer tray.

  • 5. You should perform the printer procedure to get the network page printed.

  • 6. Once you hold the WPS button over the printer, press the WPS button on the Wi-Fi printer for a moment.

  • 7. If you detected the effective Wi-Fi connection, the wireless indicators would flash increasingly.

  • 8. You need to check the test print to assure that a stable network has been detected between the printer and router.


Directions to Reset the Canon Printer


To reset the Canon printer, pursue these on-screen instructions given below:


  • 1. At first, turn on the Canon printer by pressing the Power button.

  • 2. Thereafter, long-press the Reset button appearing over the control panel of the printer.

  • 3. While holding the Reset button, hit the button of Color Start at the same time.

  • 4. You have to wait for a moment and then leave the button of Reset.

  • 5. Now, the Canon printer will begin the resetting process and restore the factory defaults.

  • 6. Then turn off the printer for some time and attach the Power wire to the power outlet.

  • 7. Finally, power on the printer and reestablish the printer's connection between the system and the Canon printer.



Directions to Setup the Canon Photo Printer via USB

To set up the Canon photo printer via USB, pursue these on-screen instructions given below:


  • 1. Firstly, power on your Canon printer.

  • 2. Thereafter, download the Canon printer drivers and then install them on the system.

  • 3. Then choose the type of connection as a USB cord Canon printer setup inside the connection type screen.

  • 4. Hit the Next button and continue with the on-screen instructions to install your Canon printer.

  • 5. Once pop-up, link one USB cord terminal in the printer.

  • 6. Now, plug the other side terminal in the USB slot of the printer.

  • 7. Finally, execute the respective features to check the connection is established correctly.