How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 7 min read · Independent comparison
• ienza Aux Audio Cable — biggest strength: a short, 4-pin male-to-male aux cable designed specifically around headset-to-controller connections on PlayStation hardware.
• ienza Aux Audio Cable — biggest trade-off: it is a narrow-purpose cable, so if you need reach or heavy-duty build quality, it is not the tool for the job.
• Monster Gen2 — biggest strength: a 9.8 ft male-to-male aux cord with gold-plated connectors and a Duraflex jacket, built for long runs and daily handling.
• Monster Gen2 — biggest trade-off: its length is a genuine advantage at a desk or in a car, but it is overkill — and clumsier to manage — for a cable that only needs to span a few inches.
• Choose ienza Aux Audio Cable if you are replacing a headset cable on a PS5 Pulse 3D or PS4 Gold headset.
• Choose Monster Gen2 if you want one long, durable aux cable for a car stereo, home system, speaker or laptop.
The ienza Aux Audio Cable is a replacement-style headset cable, and the spec sheet tells you exactly what it is built for. It is a male-to-male auxiliary cable with four pins, and it is explicitly aimed at connecting PlayStation 5 Pulse 3D and PlayStation PS4 Gold stereo headsets to a controller. In other words, this is not a general-purpose audio cord — it is the specific little cable that goes missing, gets chewed by a pet, or develops a loose connection, and leaves you with an otherwise perfectly good headset.
The connector gender matters here: male-to-male means both ends plug in, one into the headset and one into the controller. The four-pin count is the detail I would pay attention to, because headsets that carry microphone audio over a single 3.5mm jack need that extra contact, while a plain stereo cable may only pass sound. If your headset mic has stopped working but the audio still plays, a two- or three-pin cable can be the culprit. That is precisely the gap this ienza cable is designed to fill.
One more thing worth noting from the data: ienza lists compatibility across PC, PlayStation, smartphone, tablet and Xbox, and the cable is rated for indoor and outdoor use. So while the PlayStation headset framing is the headline, the cable itself is a standard aux connection. In my opinion, that makes it a reasonable all-round spare for anyone with a 3.5mm jack — just don't expect the length or the armor of a cable built for travel.
Monster Gen2: Who It's For
The Monster Gen2 Essentials Audio Cable is the opposite philosophy: one cable, many jobs, plenty of reach. The headline number is 9.8 feet. That is long enough to run from a phone in the front seat to an aux input, from a laptop on a desk to a speaker across the room, or from a TV to a sound system that sits on the other side of the furniture. If your current cable is always three inches too short, this is the fix.
The build is the second half of the story. Monster uses gold-plated connectors, which the spec sheet frames as corrosion-resistant and helpful for maintaining consistent output and reducing signal loss at the jack. In practical terms, gold plating is most useful on a cable that gets plugged and unplugged a lot — a car aux port, a headphone jack, a speaker input. The Duraflex jacket and reinforced metal connector housing are there for the same reason: daily handling. This is a cable designed to be shoved into a glovebox, wrapped around a phone, and pulled out again next week.
Compatibility is broad and standard: male-to-male 3.5mm, working with car stereos, phones, laptops, headphones, speakers, tablets, portable gaming devices and home audio gear. Six pins and a male-to-male layout round out the connection details.
Who should buy it? Anyone who wants a single long aux cable to live in a car, a home office or a living room setup — and anyone who is tired of replacing cheap cords. Who should skip it? If you specifically need a headset-to-controller cable for a PS5 Pulse 3D or PS4 Gold headset, the 9.8 ft length is working against you, and the spec sheet does not present it as a headset replacement part. A long cable dangling from a controller is a nuisance, not a feature.
• Best for PlayStation headset replacement → ienza Aux Audio Cable. It is explicitly built for PS5 Pulse 3D and PS4 Gold headsets to controller.
• Best for cable length and reach → Monster Gen2. At 9.8 ft it spans distances a short headset cable cannot.
• Best for car aux use → Monster Gen2. The length plus gold-plated connectors and Duraflex jacket suit a cable that lives in a vehicle.
• Best for a tidy controller setup → ienza Aux Audio Cable. A short cord between headset and controller stays out of the way.
• Best for durability under daily handling → Monster Gen2. Reinforced metal housing and a Duraflex jacket are the relevant specs here.
• Best for a spare headset cable → ienza Aux Audio Cable. The four-pin design targets exactly the failure point that kills headset audio or mic.
• Best for home audio and speaker runs → Monster Gen2. Wide device compatibility and length make it the more flexible pick.
• Best for microphone-capable headset connections → ienza Aux Audio Cable. The four-pin count is the detail that matters for mic audio over a single jack.
If I were buying for myself, the decision would come down to one question: am I fixing a headset, or am I wiring a room? For a PS5 Pulse 3D or PS4 Gold headset that needs a new cable to the controller, I would buy the ienza Aux Audio Cable — it is the purpose-built part, and the four-pin design is the right call for a headset that carries mic audio. For anything else — a car, a desk, a speaker across the room — I would buy the Monster Gen2 for the 9.8 ft reach and the tougher build. In my opinion, the Monster Gen2 is the more versatile purchase; the ienza is the more correct one for its specific job.
Yes. The spec sheet lists it as a 3.5mm aux audio headset cable for the PlayStation 5 Pulse 3D and PS4 Gold headsets, connecting the headset to the controller over a male-to-male four-pin connection.
It measures 9.8 feet, which is the main reason to pick it — it works as both a standard aux cord and an extender when your devices sit far apart.
A four-pin aux connection is what you want when a single 3.5mm jack carries both sound and mic audio. The ienza cable is specified at four pins; the Monster Gen2 is listed at six pins with a male-to-male layout. Match the pin count to what your headset and controller expect.
That depends on the job, not the spec sheet. If you need a short headset replacement, paying for 9.8 ft of Duraflex cable is wasted; if you need reach and durability, a short cable will not do. Check the current price on Amazon for each and match it to your actual use case.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: CAD Audio MH210 vs SAMSON Q2U: Closed Back Studio Headphones, Razer AUDIO GAMING RAZER vs Logitech G321, Audio-Technica ATH-ADX5000 vs StreamEye RODE RODECaster Duo