Steps to flash Idea Alcatel One Touch 985n with File 11
Download the flash file from [here] and extract it to a folder on your computer.
Download and install the USB drivers for your device from [here] on your computer.
Turn off your device and remove the battery.
Press and hold the Volume Down and Power buttons together for a few seconds until you see a green Android logo on the screen.
Connect your device to your computer using the USB cable.
Open the folder where you extracted the flash file and run the Flash Tool.exe file as administrator.
Select Scatter-loading and browse to the folder where you extracted the flash file. Select the MT6575_Android_scatter_emmc.txt file and click Open.
Click Download and wait for the flashing process to start. Do not disconnect your device or interrupt the process until it is completed.
Once the flashing is done, you will see a green circle with a check mark on the screen. Click OK and disconnect your device from your computer.
Insert the battery back into your device and turn it on. You have successfully flashed Idea Alcatel One Touch 985n with File 11.
Troubleshooting
If you encounter any problems while flashing your device, try the following solutions:
If your device does not boot up after flashing, try to do a factory reset by entering recovery mode. To do this, turn off your device and press and hold the Volume Up and Power buttons together until you see a blue Android logo on the screen. Use the Volume buttons to navigate and the Power button to select. Choose wipe data/factory reset and confirm with Yes. Then choose reboot system now and wait for your device to restart.
If your device does not connect to your computer or is not detected by the Flash Tool, try to reinstall the USB drivers or use a different USB port or cable.
If you get any errors or warnings while flashing, try to download the flash file again or use a different version of the Flash Tool.
Conclusion
Flashing Idea Alcatel One Touch 985n with File 11 can help you to update your device to the latest firmware and fix some issues. However, flashing is a risky procedure that can damage your device if not done properly. Therefore, follow the steps carefully and at your own risk. We hope this article was helpful for you. If you have any questions or feedback, feel free to leave a comment below.
0493d141df