We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 6 min read · Independent comparison
If you want a complete, ready-to-use wired studio headphone for drumming, monitoring and instrument practice, choose HXW DMH10; if you need a repair part to bring a worn Beats Studio 3 or Studio 2 back to life, choose Fadmew Beat Studio 3.
• HXW DMH10 biggest strength: a full working headphone — 50mm dynamic drivers, 10 Hz–32 kHz response, 32 ohm impedance, closed-back passive isolation, 3m cable with a snap-on 1/4" adapter, foldable with 180° flipping earcups.
• HXW DMH10 biggest trade-off: it's wired only, and it's built for monitoring and practice rather than for commuting or calls.
• Fadmew Beat Studio 3 biggest strength: it restores a headphone you already own — a matte black faux-leather headband arch built to match the stock part on Beats Studio 3 (A1914) and Studio 2 (B0500/B0501), with a screwdriver and four spare screws in the box.
• Fadmew Beat Studio 3 biggest trade-off: it makes no sound at all. It's a replacement part, not a headphone, and it only fits the specific models listed.
• Who each pick is for: the DMH10 is for a drummer, producer or instrumentalist who needs one reliable wired set today; the Fadmew band is for someone whose Beats already work but whose headband has cracked, stretched or worn out.
The DMH10 is a purpose-built monitoring headphone, and the spec sheet reads like it. The 50mm neodymium dynamic drivers cover a 10 Hz to 32 kHz range at 32 ohm impedance, which is an easy load for a drum module, keyboard, guitar processor or audio interface to drive. The closed-back design is the part that matters most for practice: it's described as a rugged, highly effective closed back for sound isolation, so you can keep a clear sense of the sound even in a loud room. That's the exact scenario a drummer or a home-studio player runs into — a kit, a bandmate, a noisy apartment.
The practical extras are worth noting too. It's listed at 0.6 lbs, it folds down for storage, and the earcups flip 180 degrees for one-ear monitoring — a genuinely useful feature if you're tracking with a click or need one ear open to the room. Sensitivity is rated 100 dB ±3 dB.
Who should skip it? Anyone who wants wireless, anyone who takes calls on their headphones, and anyone who needs a headset for commuting. This is a wired, passive-isolation studio tool. There's a 6-month warranty listed, which is on the short side, so treat it as a working tool rather than a buy-it-once luxury item. If the current price matters to you, check it on Amazon before deciding.
Fadmew Beat Studio 3: Who It's For
This one needs framing, because the name can mislead. The Fadmew Beat Studio 3 is not a pair of headphones. It's a headband replacement kit — a "repair kit" in the manufacturer's own words — and it exists for one job: replacing the arch band on Beats Studio 3 (A1914) or Studio 2 wired/wireless (B0500/B0501).
The pitch is simple and, in my opinion, a good one. If your Beats still sound fine but the headband has snapped, cracked or lost its padding, you're otherwise looking at sending them in for repair or replacing them outright. Fadmew's kit is designed to match the stock part in construction, size and color — matte black, faux leather — so that once it's installed, you can't tell the band was ever swapped. It ships with the screwdriver you need plus four extra screws, and the install is described as a roughly 10-minute job with no soldering.
The manufacturer also advertises a 3-month free replacement for quality-related issues, which covers you through the initial install window.
Who should skip it? Anyone who doesn't own a Studio 3 or Studio 2. It will not fit other models — Fadmew specifically points Studio Pro owners to a different part. And if your Beats have a driver, battery or hinge problem, a new headband won't fix that. This is a cosmetic/structural repair, not a resurrection for dead electronics. One note on the listing: the brand's own copy references specific dollar figures for the part and for a professional repair. I don't repeat prices here — check the current price on Amazon via the button on this page.
• Best for actually listening to music → HXW DMH10. The Fadmew part produces zero sound.
• Best for drummers and electronic kit practice → HXW DMH10. 50mm drivers, deep bass tuning, closed-back isolation and a 3m cable are built for exactly this.
• Best for home studio and instrument monitoring → HXW DMH10. 32 ohm impedance, 10 Hz–32 kHz response, and a 3.5mm jack with a 1/4" adapter.
• Best for one-ear monitoring while tracking → HXW DMH10. The earcups flip 180 degrees.
• Best for long sessions → HXW DMH10. Broad, thickly cushioned headband and earcups, and only 0.6 lbs.
• Best for fixing rather than replacing → Fadmew Beat Studio 3. A same-as-stock headband for Beats Studio 3 and Studio 2.
• Best for a tool-free repair → Fadmew Beat Studio 3. Screwdriver and four spare screws included, no soldering, roughly 10 minutes.
• Best for portability and storage → HXW DMH10. It folds down small; the Fadmew kit is a single rigid arch plus hardware.
If I had to buy one of these today, I'd buy the HXW DMH10. That's not a knock on the Fadmew part — it's a question of what each one is. The Fadmew band is a smart, well-thought-out fix for a very specific problem: a broken Beats headband on a pair you otherwise love, and in that narrow lane I'd recommend it without hesitation. But it only makes sense if you already own those exact Beats models. The DMH10 is a complete, working headphone that covers drumming, practice and studio monitoring out of the box. For most people reading this comparison, that's the more useful purchase.
FAQ
how do over ear headphones work
are studio headphones worth it
It depends on what you're doing. If you drum, track instruments or monitor at home, a wired closed-back set like the DMH10 gives you isolation, a long 3m cable and a 1/4" adapter — practical features a casual Bluetooth pair usually lacks. If you just want music on the train, a studio headphone is more tool than you need.
what headphones do professional studios use
That varies widely, and no single model is universal. What studio work generally calls for is a wired, closed-back, over-ear design with a flat-ish response and a long cable — which is the category the HXW DMH10 sits in, with its 10 Hz–32 kHz range, 32 ohm impedance and 3m OFC cable.
how to wear over ear headphones
Slide the headband over the top of your head and let the earcups sit fully around your ears, not on them. On the DMH10 the headband is adjustable and the earcups flip 180 degrees, so you can rotate one cup away for single-ear monitoring while keeping the other sealed.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: LUDOS Clamor vs QAWESDX Earbuds Pack, BENEWY USB C Headphones vs Saysurey 20: Headphones with, LexonElec ATTACK SHARK G300 vs PAIYULE Headphone Case, noot products K11 vs Yealink UH34