How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-22 · 7 min read · Independent comparison
• HQT Professional Rubber Bumper — biggest strength: Four food-grade silicone bumper feet rated to 430°F, BPA-free, sized 0.4 x 0.4 x 0.08 in, made specifically to protect the tray and the inside of the air fryer from scratching.
• HQT Professional Rubber Bumper — biggest trade-off: It is only the feet. No plate, no handle, no coating. If your tray is missing or damaged, these four little tabs won't help you.
• Generic 2.6QT — biggest strength: A complete 6.89 in (17.5 x 17.5 cm) food-grade carbon steel grill plate with a double-layer non-stick coating, a handle, dishwasher-safe cleaning, and four rubber feet included.
• Generic 2.6QT — biggest trade-off: The coating needs care — no abrasive pads or metal scouring balls — and the size is fixed at 6.89 in square, so it only fits fryers that match that footprint.
• Who each pick is for: HQT for owners of a Dash 2.6QT / PowerXL / GoWise / Chefman 2QT–5QT tray who just need new feet; Generic for anyone who needs a full replacement or spare crisper plate with feet already in the box.
The HQT set is a very narrow product, and that's the point. You get four black silicone rubber tabs, each about 0.4 x 0.4 x 0.08 inches, weighing a fraction of an ounce. They're made from food-grade silicone that the maker describes as non-slip, scratch-resistant, strong and tough, BPA-free, non-toxic and tasteless. The headline spec is heat: the material is rated to withstand up to 430°F / 221°C, which is comfortably above what a typical air fryer tray sees during a normal cook.
What do they actually do? They sit on the tray as bumpers. Instead of bare metal or bare plastic resting against the basket and the interior walls, the silicone takes the contact. That matters more than it sounds. A tray that slides and scrapes every time you pull it out will, over months, dull the finish inside the basket and scratch the plate itself. Rubber feet also keep the plate from rattling around while the machine runs, and they stop it from sliding when you set it down on a counter.
Installation is about as simple as an accessory gets: press them onto the tray, and when they get greasy, pull them off to rinse and clean. Four in the pack means you have a full set with no spares to hunt for later.
Who should buy it? Anyone whose existing tray still works fine but whose original feet have hardened, torn off, or gone missing. Also anyone who bought a third-party tray that arrived without feet, or who wants a small stock of replacements on hand so a single lost tab doesn't mean buying a whole new plate. The fit list is broad for a part this specific: Dash 2.6QT, PowerXL, GoWise, and Chefman trays in 2QT, 3.7QT, and 5QT, plus any other tray that matches the stated dimensions.
Generic 2.6QT: Who It's For
The Generic 2.6QT is the opposite kind of purchase: it's the plate itself. This is a 6.89 x 6.89 inch (17.5 x 17.5 cm) square crisper tray built from food-grade carbon steel, BPA-free and odorless, and it's designed to be compatible with the Dash 2.6QT Tasti-Crisp Digital Air Fryer or any other fryer whose basket matches that footprint.
The two features that matter most are the coating and the handle. The plate carries a double-layer non-stick coating, which the maker says is applied so it resists flaking off and holds up longer than a single-layer finish. In practice, that's what makes the difference between a tray you scrub and a tray you wipe. There's also a handle, which sounds minor until you've tried to lift a hot, greasy plate out of a basket with tongs — the handle lets you pull it straight out and carry it to the sink.
Cleaning is genuinely low-effort: the plate is dishwasher safe. The one rule is to avoid rough abrasive cloths and metal scouring balls, which will chew through any non-stick layer, this one included. Use soft sponges and you'll keep the coating intact.
The box includes one grill plate and four rubber feet, so the stability problem is solved out of the gate — you don't need to buy feet separately.
Who should buy it? Anyone whose original Dash 2.6QT plate is scratched, warped, or missing. Anyone who wants a second plate so they can cook a batch, pull the tray, and start the next round without washing in between. And anyone who bought a used or hand-me-down air fryer that arrived without its insert. The feet-included detail also makes it a clean one-purchase fix for a fryer that's currently unusable.
Who should skip it? If your tray is in good shape and only the feet are worn, buying a whole plate is more than you need — that's the HQT scenario. And if your air fryer's basket isn't 6.89 inches square, this plate won't seat properly, so measure before you commit.
Side-by-Side: Which Should You Choose?
• Best for replacing worn or missing feet only → HQT Professional Rubber Bumper. Four silicone tabs, nothing else to pay for or store.
• Best for heat tolerance on the feet themselves → HQT Professional Rubber Bumper. The silicone is rated up to 430°F / 221°C, and the material is described as non-slip and scratch-resistant.
• Best for easy cleanup → Generic 2.6QT. Double-layer non-stick plus dishwasher-safe, with the caveat that abrasive scrubbers are off-limits.
• Best for handling hot food → Generic 2.6QT. The built-in handle is the feature HQT simply doesn't have, because HQT isn't a plate.
• Best for a fryer missing everything → Generic 2.6QT. Plate and feet arrive together, so one order gets you cooking again.
• Best for keeping a spare set on hand → HQT Professional Rubber Bumper. Feet are the part that fails first, and four in a pack covers a full tray.
• Best for fit confidence → check your tray size first. HQT lists Dash 2.6QT, PowerXL, GoWise and Chefman 2QT–5QT trays; Generic lists 6.89 in square, Dash 2.6QT Tasti-Crisp compatible.
In my opinion, most people searching this comparison should buy the Generic 2.6QT. Here's my reasoning: if you're comparing these two at all, there's a decent chance your tray is the thing that's actually failing, and a four-pack of feet can't fix a scratched or missing plate. The Generic kit gives you the plate, the handle, the non-stick coating, the dishwasher-safe cleaning, and the feet — one purchase, complete solution. I'd only steer you to the HQT Professional Rubber Bumper if your tray is genuinely fine and the feet alone are the problem, in which case buying a whole new plate is wasted money. Decide that one question first — plate or feet — and the choice makes itself. Either way, worth checking the current price on Amazon before you commit.
Just the feet. You get four silicone rubber tabs sized 0.4 x 0.4 x 0.08 inches. There's no plate, handle, or coating in the pack — it's a part, not a tray.
It's listed as compatible with the Dash 2.6QT Tasti-Crisp Digital Air Fryer, and it measures 6.89 x 6.89 inches (17.5 x 17.5 cm). If your basket matches that footprint, it should seat correctly. Measure first if you're unsure.
Included. The package is one grill plate plus four rubber feet, so you don't need to order the HQT set on top of it.
Skip rough abrasive cloths and metal scouring balls, and stick to soft sponges or a dishwasher cycle. The double-layer coating is designed to resist flaking, but abrasive scrubbing will still damage any non-stick surface.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.