HP Envy 4500 printer

The hp envy 4500 printer is an all in one printer. Its speed can be up to 8.8 ppm black, up to 5.2 ppm color. Further, it can print from your Smartphone, tablet, and Internet-connected PC. Moreover, the Recommended monthly page volume is100 to 400 pages. Similarly, the Scan resolution, optical: 1200 ppi, and Copy reduce or enlarge settings: 25%−400%.

How to set up the HP Envy 4500 printer?

The below steps will help the user to install the HP Envy 4500 printer:

  • At first, start unpacking the hp envy 4500 printer package printer by peeling off its tape.

  • Now, smoothly take the printer out from the package.

  • Moreover, place the HP Envy printer on a flat surface and initiate the set up process.

  • After that, power up the printer by linking one end of the power cable to the printer and then to the power outlet

  • Turn on the HP Envy 4500 printer and do this by holding the Power button on the printer.

  • On the other hand, insert the ink cartridges into the slots and load the paper in to the paper input tray.

  • Unpack the new ink cartridges and load them in to the slots and check to hear its locking sound.

  • Further, pull out the input tray, dust a stack of paper and keep them on the input tray, and adjust the width guides.

  • Extend the output tray of the hp envy 4500 printer.

  • All these actions will be detected by the HP printer and will align the ink cartridges.

  • At last, the alignment page will be printed and make sure to verify the alignment.

  • Then, begin with downloading the driver for the printer and connecting it to the Network.

Getting the Network access for the HP Envy 4500 printer

Yes! The users can make use of two methods to get network access for the HP Envy 4500 printer. The methods can be PIN method and Traditional wireless connection.

The following guidelines can assist the users in connecting the HP Envy printer to the network using the PIN Method:

PIN Method

  • First of all, hold theWireless button on the hp envy 4500 printer on the front panel to view the wireless menu.

  • Next, choose Settings from the printer display.

  • After that, select Wi-Fi protected setup from the HP Envy printer LCD.

  • Now, if having a WiFi protected setup router with a WPS push button, choose the Push button.

  • Similarly, perform the on screen guidelines.

  • If the wireless router does not have a WPS option, select a PIN and proceed with the on screen process.

Traditional wireless connection

Make use of the following steps to connect the printer to the network using the Traditional wireless connection:

  • At first, hold the Wireless button from the hp envy 4500 printer control panel, and then choose Settings.

  • Next, scroll and choose select Wireless Setup Wizard, and then hold OK.

  • Proceed with the coming up prompts on the screen to set up the wireless connection.

  • Moreover, load the printer software CD in the computer CD-ROM drive.

  • Finally, start with the on-screen guidelines to install the printer software.

  • And this completes the wireless setup process.