Hp Toner Chip Reset Software Download

Hello everyone,

Frist of all "THANK YOU" for looking into my post and for the Time spent on this post.

and I'm just a Mechanical student.

I have a Ricoh SP 3510 sf printer, I just wanted to know how to reset the cartridge chip.

this the link to a blog which has been tried for Samsung printer using Arduino

I having a Arduino Uno

Using Arduino IDE 1.8.16 windows 10

setting in Arduino software

Screenshot (28)698853 35.4 KB

I would like to read this toner chip when it is new, then write it back (reset) it when it is "empty" so I can fill the toner cartridge myself cheaply. I know this is possible because I see other devices that do it for other toner cartridges, just not mine. See here:

Hp Toner Chip Reset Software Download

DOWNLOAD 🔥 https://ssurll.com/2y3BWT 🔥

Doing a google search you can find pre programmed modules that you replace the old one with. I'm not sure if you have modules like this because the chips cannot be re-programmed and the toner level is estimated by the printer firmware. Something like the amount of pages the printer has done.

If you went to the link, you would have seen where they guy on the blog is in the same boat. He has a toner chip that he knows nothing about. He wrote some Arduino code to scan the I2C bus until it finds a device:

"I never used the wire library before and I was surprised by the small number of methods it has.

On Wikipedia I read each device on a I2C-Bus has it's own 7-bit address and to communicate with it you have to know this address. So firstly I wrote a function to scan for devices on the bus. My idea was to try to read from each possible address and to listen for answers. This worked excelently I found the chip at the first try."

Yes, I have done this to purchase new toner chips. You are also correct in that the toner chip comes pre-programmed with a number that the printer deducts from (and writes back to the chip) until it is at zero. Then, no matter how much toner you actually have left, you have to get a new toner (or at least a new toner chip).

All of that is documented very well on the link I posted above.

I'm not averse to just purchasing new toners, but I thought this would be a fun project to dump the eeprom content from each new toner chip (C, M, Y, K), then have an Arduino uno with four colored buttons that will write that content (based on the button color and matching toner color) to a spent toner chip to 'reset' it..

3DPiper:

You are also correct in that the toner chip comes pre-programmed with a number that the printer deducts from (and writes back to the chip) until it is at zero.

Is it writing back to the chip or is the chip just a serial number that the printer sees a new toner cartridge and then assumes the toner is full and subtracts the usage level internal to the printer and not writing to the chip.

Until you can dump the contents and see if it changes between prints you cannot be sure.

The ultimate way to do this would be to use a logic analyser to capture the data traffic between the printer and the toner chip to get an idea of the wire commands used.

Does the chip use 3.3V or 5V and what voltage is your arduino working at?

tag_hash_107Toner cartridges for printers were designed with a specific amount and yield. A toner cartridge chip is programmed to monitor and count the amount of droplets used during printing. When the number of droplets is reached, it will then communicate with your PC to send the warning.

Step 2

Place the cartridge in an upward position on a flat and even surface. The release points on the cartridge should be pointing at the upward direction. Hold the resetter upright, and make sure its LED lights are pointing upward as well.

Step 4

Keep pushing the pins/button on the cartridge until the LED lamp on the cartridge turns green, or it indicates with a beeping sound that the toner cartridge has been reset. The whole process should take no more than 5s.

I have a MF644C printer. I installed a new Canon 054 black toner cartridge in July, 2021. I estimate that I have made no more than 700 copies since the installation. I am receiving a message that the black cartridge needs replacement. The toner level for the black cartridge shows 0%. This makes no sense. Approximately how may copies should I get per black cartridge? Can the cartridge level be reset?

You would not be able to reset the toner level for the cartridge. The Canon toner cartridges have a chip in them that track toner usage and if the counter has reached 0, you would not be able to change the info since the cartridge can't detect new toner added. In this situation, I would suggest contacting support at 1-800-652-2666. Our agents would be happy to assist you with the toner cartridge issue and see what is going on.

Im still having a hard time with my wf4830 pro US version. Its impossible. I got a chip resetter physical and it did not work. Is there anyone who has successfully converted a wf4830 pro US to a sublimation printer? I have been looking for months now, please contact me if you have or know someone who has thank you in advance!

Hi Rob,

Thank you for clear explanation of resetting cartridge chips. I wonder whether you could send me a link that describes contacts on the Epson SX235N chip, their numbers, functions, type of chip, and possibly the schematic diagram of connections.

Andrew

The Sawgrass SG500 is a fine sublimation printer, Duane, but resetting the chips can be a challenge. This video shows a user having success by replacing the chip on his SG500 cartridges. Check it out!

Hi Rob, Firstly thank you so very much for such an informative write up, its very well written, will plenty of detail. I own the epson 440 and my search for resetting the cartridges led me here to your website. You mentioned their are 3rd party chip resetting firmware/programs available, some of them being free, do you have any suggestions on where im able to download one. Most ive come across are free, but will lock you out of the printer without buying an activation code.

According to Primera, you should go to the control panel on your LX500 and select Printers and Faxes.

Select your printer and click on Printing Preferences. You can choose Clean/Change Cartridges, Check Ink Levels, or Ink Levels and Cartridge Maintenance under preferences. Any of these choices should reset your Primera LX500 cartridges.

Click the Change button.

Choose which cartridges you are changing, black or color.

Best of luck, Muz!

Hi, I have tried everything possible with my Hp 63 original in cartridge. to override. It is still showing ink level depleted even after I have reinked the cartridge and over the chip thing the test print comes out perfect showing the colors and it said it has aligned however when I print my document it comes out black and white only and showing me estimated ink level for the color is empty.

The color cartridge is full. Can you show a picture of where to cover on the HP 63 chip after refilling the ink please.

How can I reset a Brother LC404 ink cartridge for a Brother J1205W printer? I doesnt seem to have a reset button on the cartridge, and I cannot find a cartridge resetter available online. I am very frustrated with this as I bought the printer because it was advertised with the Inkvestement Tanks which I thought were refillable. Great information in your site here. Thanks

I have Kyocera 3155DN printers that I just bought from UK. They use different power in the US but I have a transformer that takes care of that issue. However the toner the UK printer uses is TK-3190 and the toner the US version uses is TK-3182. Will a reset chip allow me to use the TK-3182 in the UK printer?

Hello, is it possible to reset chips for Canon imageprograf Pro 6100S.

There is 8 cartridges. I just replaced one chip with Canon IPF-1700 chip although it is not the same chip. It works!

Other 7 color chips I would like to reset somehow.

There is no reseter on the market. There is no buttons to press on the cartridges.

If you poke around the interwebs, you should be able to find replacement chips for your Kodak 10 series cartridges, Steve. The installation process for Kodak 10 series chips is pretty straightforward.

1. Remove the ink cartridge from your Kodak inkjet printer.

2. Turn the cartridge over.

3. Press the plastic clip holding the chip in place inward until the chip slides down and off the ink cartridge.

4. Cut the plastic clip that holds the chip in place off the ink cartridge.

5. Slide the new chip into place. It will have an adhesive backing. Align the longer side of the chip with the left side of the cartridge.

6. Reinstall the cartridge and print away!

I have a Primera LX-2000 . I have been trying to find an chip resetter or a solution to use aftermarket ink. I have even explored modifying the firmware. The only solution I can find are replacement chips which still make this printer ridiculously expensive to use due to the high cost of the primera ink cartridges. Rob, you seem to be the ultimate guru on finding workarounds ? . Your knowledge is impressive. Do you have any ink workarounds for this Primera model?

Hi team c4t is possible to reset the inks bought from HP instant ink ? The issue is that the inks are only working if i keep paying them each month. I do not use the printer so often and its not worth it so after 2 years I decides to cancel my subscription and have to full setts of unused inks that I cant use now ;((

Hi, I have an Epson WF-2750 from the US, which uses 220XL cartridges, I moved in Europe, where these cartridges are not sold, and the EU version of the WF-2750 uses 16XL instead.

Is there a way I can reprogram the chip of some new 16XL cartridges so ti can be detected? Or may be do something on the printer side (flashing new firmware which would not check the chip?).