4 of the drives are in a RAID 5 configuration and one of them has failed leaving the server in an interim recovery configuration. The two remaining drives show up as unassigned in the Array Configuration Utility.
Since you have the HP Array Configuration Utility installed on Windows 2008, please provide the output of the following command in the HP Array Configuration Command Line program (It's in your Programs Menu).
Hp Proliant Dl380 Gen10 Array Configuration Utility Download
Download File 🔥 https://bltlly.com/2yGAOl 🔥
Based on that, we'll be able to determine if the array is in the dreaded "Waiting for Rebuild" state. If it is, then it means that you won't be able to rebuild the array due to read errors on the remaining RAID 5 disks.
if the drive you replaced is put back into an existing array then the ProLiant array utility should immediately start rebuilding it. I believe that the hot spare is configured when the first building the array. does the disk management in the Proliant utilities see the new drive?
The unassigned drive has controller configurations written on it, even if you change the slot it will still be an unassigned HDD.In order to use it you have to set it as a global hot spare (or dedicated HS for the VD).I don't remember exactly how can this be done from the configuration utilities, but I'm quite sure that you can find out from the Controller BIOS upon rebooting a machine, or reading the HPACUCLI documentation. 152ee80cbc
caribbean nautical charts free download
web browser for windows xp free download