The bets and affordable all in one printer is HP Laserjet pro M102W. This printer can print up to 7-8 black pages in a minute and up to 5 color pages per minute. The monthly duty cycle is 1000 pages. This article will focus on hp laserjet pro m102w wireless setup and driver download. And that’s simple! On the Printer’s control panel, choose Setup and then opt for Network. Select Wireless Setup wizard, key in the credentials, and finish the process.

How to Proceed with HP laserjet pro M102W wireless setup?

Coming up are the guidelines to initiate HP laserjet pro M102W:

  • At first, turn on the HP Wireless printer.

  • On the touchscreen, choose Setup.

  • After that, select Network from the setup menu.

  • Next, choose the Wireless Setup Wizard from the Network menu.

  • This searches for the wireless routers in the range.

  • Choose the Network (SSID) from the list.

  • And key in the WEP/WPA Passphrase for the network and choose Done

  • Finally, press OK to confirm the settings and to print the wireless report.

  • This completes the hp laserjet pro m102w wireless setup.

HP laserjet pro m102w setup- Connect it simply!

The below guidelines can let the users install the HP Laserjet pro printer:

  • Firstly, peel off the tape on the package and fold back its flaps and take the printer out.

  • Check for the attachments that came along with the package.

  • Clear of all the packing materials from HP Laserjet Pro M102W.

  • Now, power up the printer using the power adapter.

  • Secondly, press the power button on the Laserjet printer and turn it on.

  • Insert the ink cartridges by accessing the ink cartridge door.

  • Keep calm until the carriage movement to stop; side by side, unpack the ink cartridges.

  • Then, place the ink cartridges into their openings and confirm to hear its locking sound.

  • Thirdly, dust a pile of paper and keep it on the input tray.

  • After that, drag the output tray and ensure to modify its width guides.

  • Moreover, the Laserjet printer will align the ink cartridges and prints the alignment page.

  • Make sure to verify the alignment page.

  • At last, perform the hp laserjet pro m102w wireless setup.

Another Method for HP laserjet pro m102w wireless setup.

It's the WPS method!

The below instructions can teach the users to link to WiFi using the WPS method:

  • At first, ensure that the router has a WPS button.

  • Next, keep the printer within range of the Wi-Fi router signal.

  • Secondly, the printer must be in the WPS connection mode.

  • Now, access Open the Setup and choose the Network or Wireless settings menu.

  • Then, opt for select Wi-Fi Protected Setup

  • Further, select Button Push and prefer Start.

  • Within two minutes, long-press the WPS button on the router for five seconds.

  • Get back to the printer and verify the status of the wireless LED.

  • If the light or blue bar stops blinking, the printer is successfully connected to the network.

  • And this completes the hp laserjet pro m102w wireless setup.