How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a cheap, no-fuss way to get your headphones and controller off the desk and onto the wall or desk edge, choose HomeMount Headphone Hook; if you need to give an old PC, laptop or PS4 a working 3.5mm mic-and-headphone port, choose MOSWAG USB.
These two look unrelated on the surface, and honestly they are. One is a physical storage accessory, the other is a tiny external sound card. But shoppers land on both for the same underlying reason: they want to solve a small, specific annoyance without buying a whole new setup. Let me break down what each one actually is, who it fits, and which one I'd put my own money on depending on your situation.
• HomeMount Headphone Hook — biggest strength: strong adhesive mounting that sticks to the side of a desk or PC case with no drilling and no tools, and it holds headphones, controllers, cables, purses or bags.
• HomeMount Headphone Hook — biggest trade-off: it's adhesive-based, so the surface has to be smooth and clean, and the bond is only as good as your prep. It's a storage hook, not a stand with a weighted base.
• MOSWAG USB — biggest strength: it adds a working 3.5mm TRRS headset port (mic in + audio out) to almost any USB device, with a built-in DAC chip and plug-and-play setup.
• MOSWAG USB — biggest trade-off: it only helps if your problem is a missing or broken audio jack. It does nothing for desk clutter, and it won't work with plain TS or TRS mic connectors.
• Who HomeMount is for: gamers and desk workers who want headphones and controllers off the surface and within arm's reach.
• Who MOSWAG is for: anyone whose PC, laptop or console lost its 3.5mm port, or who needs a headset jack on a machine that never had one.
The HomeMount Headphone Hook is a two-pack of adhesive hooks, black, made from ABS with a soft TPU contact area so it doesn't scuff your gear. The idea is simple: you peel the backing, press it onto a smooth surface, let it sit for a day, and then hang things on it. It's designed to go on the side of a desk or a computer case, which means it uses vertical real estate you're already not using. That's the whole pitch, and for a lot of people that's enough.
Where it earns its place is in a gaming or work-from-home setup. The listing calls out that it fits not just headphones but also Xbox, PS4 and PS5 controllers, desktop headsets and even a small purse or bag. In practice, that means one hook for your headset and one for your controller, or one on the desk and one on the tower. The soft TPU material matters here — it's the part that stops the hook from scratching the headband or the plastic shell of a controller. The ABS body is what gives it rigidity so it doesn't flex under load.
The weight limits are worth reading carefully. The sheet lists a maximum weight recommendation of 5.1 pounds and a maximum weight capacity of 2 pounds, while the usage copy mentions supporting items under 5 lbs. Those numbers don't perfectly agree, and I'd treat the lower figure as the honest ceiling. Headphones, controllers and cables are all well under that, so it's a non-issue for the intended use. It would not be my pick for a heavy bag or anything you'd yank on repeatedly.
Who should skip it? Anyone renting or working on a delicate surface they don't want adhesive on, anyone who needs to reposition the hook often, and anyone who wants a freestanding stand they can move around the room. Adhesive is a commitment. It's also not the product for you if your actual problem is audio, not storage.
The MOSWAG USB adapter is a 20 cm (0.65 ft) cable with a USB-A plug on one end and a 3.5mm TRRS jack on the other. Inside is a DAC chip, and the specs list 16-bit/48kHz output with a 95 dB signal-to-noise ratio and stereo output. In plain terms: it turns a USB port into a headset port, and it does so with a decent amount of headroom for voice chat, calls, music and game audio.
The reason this thing exists is that a lot of modern laptops, desktops and consoles either dropped the 3.5mm combo jack or have one that's flaky. If your headset has a single TRRS plug — the kind with both headphone and mic on one connector — this adapter gives you a place to plug it in. It supports both CTIA and OMIP wiring standards, which covers the vast majority of headsets out there. Compatibility is broad: Windows versions from XP through 10, plus 9, 8 and Vista, along with Linux, Mac OS X, Chrome OS, Raspberry Pi, PS4, PS5 and Surface devices.
Setup is genuinely plug-and-play. No drivers, and the sheet says the system recognizes it within seconds. The cable is nylon braided and the shell is aluminum, which is a meaningful upgrade over the plastic-and-PVC adapters that tend to crack at the strain relief. The aluminum shell also helps with heat and feels less disposable in the hand.
The one gotcha is the microphone side. The sheet explicitly notes the 3.5mm male mic jack does not support TS or TRS connectors. If you have an older headset with separate mic and headphone plugs, or a standalone mic on a TRS cable, this is not the adapter for that job. It wants a TRRS headset. Also worth knowing: the channel configuration is listed as 1, and the surround mode is described as stereo surround — this is a stereo output device, not a multi-channel sound card, so don't expect virtual 7.1 or anything like that.
Who should skip it? Anyone whose devices all have working 3.5mm jacks already, and anyone trying to connect a TRS microphone. It solves one specific problem very well and nothing else.
• Best for clearing desk clutter → HomeMount Headphone Hook. Two hooks, no tools, no drilling, and your headset and controller live on the wall or desk edge instead of on your mousepad.
• Best for restoring lost audio → MOSWAG USB. If your laptop or PC has no 3.5mm combo jack, this is the fix.
• Best for a gaming setup → depends on the gap. Controller and headset storage points to HomeMount. Voice chat on a console or a jackless laptop points to MOSWAG.
• Best for durability under normal use → MOSWAG USB. Braided nylon and an aluminum shell are more robust than a plastic-bodied adapter, and there are no moving parts to fail.
• Best for installation simplicity → HomeMount Headphone Hook. Peel, stick, wait 24 hours. No software, no recognition step, no compatibility list to check.
• Best for broad device compatibility → MOSWAG USB. The supported platform list spans Windows, macOS, Linux, Chrome OS, Raspberry Pi and PlayStation hardware.
• Best for gifting → HomeMount Headphone Hook. It's a two-pack, it's universal, and the sheet frames it as a small surprise gift that works for headphones, purses, cables, jewelry or schoolbags.
• Best if you want zero commitment → neither, honestly. Both are permanent-ish additions. The hook sticks, and the adapter occupies a USB port.
If I had to pick one for the average person reading this, I'd buy the HomeMount Headphone Hook. In my opinion it solves a problem nearly every desk owner has — headphones and a controller lying on the surface — and it does it for the cost of two small pieces of plastic with no software, no drivers and no compatibility checklist. The adhesive plus the soft TPU contact point is a sensible combination, and the two-pack means you can cover two spots at once.
That said, I'd buy the MOSWAG USB without hesitation if my actual complaint was audio. It's the more technically substantial product of the two, and the 16-bit/48kHz DAC with a 95 dB signal-to-noise ratio is a real, measurable spec rather than a marketing phrase. If your laptop killed its headphone jack, this is the cleanest fix I'd reach for.
They're not competitors. They just both happen to be small, cheap solutions to specific desk problems — so figure out which problem you actually have, then buy that one.
FAQ
Yes, if your headset uses a single TRRS plug. The adapter supports CTIA and OMIP standards and provides both mic-in and audio-out. It will not work with TS or TRS microphone connectors, so check your plug before buying.
No. It's plug-and-play, and the sheet says the system recognizes it within seconds. It works across Windows, macOS, Linux, Chrome OS, Raspberry Pi and PlayStation hardware.
They're not comparable on value because they do completely different jobs. If you need storage, the HomeMount two-pack is the practical answer. If you need a working headset jack, the MOSWAG adapter is the only one of the two that helps. Check the current price on Amazon for each before deciding.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.