We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-23 · 8 min read · Independent comparison
My top pick for most people is the Krone Kalpasmos Beats Solo 3 replacement earpads: 20mm of slow-rebound memory foam and protein leather make them the most comfortable, longest-lasting way to bring a tired pair of Beats Solo 2 or Solo 3 back to life.
• Krone Kalpasmos Beats Solo 3 — best for reviving worn-out Beats Solo 2 and Solo 3 earpads; pick this if you want noticeably thicker 20mm memory foam padding and a precise, adhesive-backed fit.
• GEVO Ear Pads Replacement — best for Beats Studio 2 and Studio 3 owners who want a breathable everyday cushion; pick this if you want high-density memory foam in a color other than black.
• SURITCH Case Cover — best for protecting a JBL Vibe Beam or Vibe 200TWS charging case on the move; pick this if you want a magnetic, shockproof shell with a carabiner and cleaning kit.
• BOLOUY Headphone Cover Ear — best for SC60 USB M-L headset users whose original pads have flattened; pick this if you need a specific 60mm outer / 35mm inner cushion size.
This is a pair of replacement ear cushions built specifically for Beats Solo 2 and Solo 3 headphones, including the Solo 2 Wireless and Solo 3 Wireless models. It is not a case or a slip-on sleeve — it is the actual pad that sits against your ear, made in a Red Label Edition from protein leather wrapped around foam. If your Solo pads have gone shiny, cracked or flat, this is the part that fixes it.
The headline number here is 20mm of slow-rebound memory foam, which the maker describes as over 10% more padding than a typical replacement. In daily use that thickness does two things: it puts more cushion between your ear and the driver housing, and it pushes your ear slightly further from the speaker, which tends to improve passive noise isolation. For long listening sessions — commutes, work-from-home afternoons, long flights — that extra give is the difference between taking your headphones off after an hour and forgetting you're wearing them.
Installation is where this one stands out for a beginner. It uses strong 3M adhesive plus included installation tools and a tutorial, so you're not guessing at how the pad seats. The maker also suggests swapping ear cushions every seven to eight months for hygiene reasons and lists a service life of 180 days or more, which is a fair expectation for foam that compresses every time you put the headphones on.
The main trade-off is that it is model-specific. It fits Solo 2 and Solo 3 only — not Studio, not Pro, not the on-ear models with a different housing. It also commits you to the adhesive route, which is less forgiving than a pad that clips on. In my opinion, if you own Solo 2 or Solo 3 headphones and the pads are the only thing wrong with them, this is the pick I'd reach for first.
GEVO's offering is the same idea aimed at a different headphone family: replacement cushions for Beats Studio 2 and Studio 3, both wired and wireless. The sheet names the specific models — Studio 2 Wired (B0500), Studio 2 Wireless (B0501), and Studio 3 in both versions — and explicitly warns that these do not fit Beats Solo on-ear headphones. Check your model before you commit.
The material story is high-density memory foam under protein leather. Two details matter in practice. First, the foam is described as thicker and higher density than typical alternatives, which gives your ear more space inside the cup and helps block outside noise. Second, the leather is called out as soft and breathable, which is the spec I'd care about most if you wear over-ears in summer or during workouts — breathability is what keeps the pad from turning into a sweaty ring on your ear.
Durability gets real attention too. The cushions are stitched along the inside seam, a construction detail meant to stop the common failure where the covering splits at the edge, and the adhesive on the back is described as upgraded to hold more firmly than the original. That matters because a Studio pad that creeps loose ruins the seal and the bass with it. You also get a 180-day warranty and installation instructions in the box, and the color is Crystal Blue rather than plain black.
The trade-off is compatibility — Studio only. If you own Solo headphones, this is simply the wrong shape. And Crystal Blue is a look, not a neutral: on black Studio headphones it's a visible accent rather than an invisible repair. Worth knowing before you order.
This one is a different category of "headphone cover" — it's a protective shell for a charging case, not an ear cushion. It's built for the JBL Vibe Beam, Vibe Beam 2 and Vibe 200TWS earbuds, and it is a cover only: the charging case and earbuds are not included. Think of it as armor for the plastic case you already carry.
Carry options are handled with an anti-rust carabiner and keyring, which clip to a bag strap or belt loop — genuinely useful if you're the type who loses earbuds in a backpack. Installation is straightforward: pre-installed adhesive strips hold the top piece in place, and a T-shaped tool makes removal quick when you want to swap it. There's also a retractable cleaning pen with dual nylon brushes on one end and a flocking sponge on the other for getting debris out of the crevices.
Two honest caveats. It adds bulk to a case that's meant to be pocketable, so if you carry earbuds loose in a jeans pocket, this isn't for you. And the water resistance is described as water resistant, not waterproof — it'll shrug off rain and splashes, not a swim. For a bag, a gym, or a commute, I think it does exactly what it promises.
BOLOUY Headphone Cover Ear
BOLOUY's pads are the narrowest fit of the four: replacements for the SC60 USB M-L headset, sold as a pair. This is a work-and-call headset pad rather than a music-listening upgrade, and the listing treats it that way — the pitch is straightforward replacement for cushions you've lost or worn out.
The dimensions are the reason to read carefully here. The outer diameter is 60mm (about 2.36 inches) and the inner diameter is 35mm (about 1.38 inches), and BOLOUY notes a 1–3cm allowance for manual measurement. If your headset cups aren't in that neighborhood, these won't seat properly. If they are, you get a firmer, thicker memory foam cushion that the maker says conforms to the ear and isolates sound from your surroundings — the firmer density being the point, since a squishy pad on a headset you wear for calls leaks background noise into the mic.
The other thing worth flagging is the honest framing in the listing: earpads wear out, and worn pads degrade both sound and comfort. That's true of every pad in this guide. Replacing them is the cheapest fix for a headset that suddenly sounds thin or feels uncomfortable.
The trade-off is scope. These are made for one headset family, come in black memory foam only, and are sold as a single pair with no installation tools mentioned. If you own an SC60 USB M-L, that's fine. If you don't, look at the Beats options above instead.
How We Picked
It can mean two different things, and the listings here reflect both. It's either a replacement ear cushion — the padded ring that sits against your ear — or a protective shell that wraps around a charging case. Check whether you're replacing a worn pad or protecting a case before buying.
Match the model numbers. The Krone Kalpasmos pads fit Beats Solo 2 and Solo 3; the GEVO pads fit Beats Studio 2 and Studio 3 and explicitly do not fit Solo; the BOLOUY pads are sized for the SC60 USB M-L at 60mm outer and 35mm inner.
Krone Kalpasmos suggests changing them every seven to eight months for hygiene, and lists a service life of 180 days or more. As a rule, replace them when the foam stops springing back, the covering cracks, or the seal around your ear stops feeling snug.
Yes, in a measurable way. Pads that have flattened lose their seal against your head, which weakens bass and lets outside noise in. Thicker, firmer foam — like the 20mm slow-rebound foam here — restores that seal and improves isolation.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: INFURTURE USB C Headphone vs VINTEAM 3D, BANIGIPA Headset vs XANAD Headphone Headset Case, ソニー(SONY) headphone MDR-ZX110 vs DUOSSEAR T30: Non in Ear