We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-24 · 7 min read · Independent comparison
If you want to refresh a pair of Jabra on-ear work headsets and keep them going, choose HAOMUK Replacement Ear Pads; if you need a complete wired gaming headset for a Nintendo Switch, choose Turtle Beach Airlite Fit. These two products only look like competitors because both touch the word "ear." One is a spare part. The other is a whole headset.
• HAOMUK Replacement Ear Pads — biggest strength: memory foam and protein leather cushions cut to match the original Jabra Evolve2 65, Evolve2 40 and Elite 45h pads, so you restore an existing headset instead of replacing it.
• HAOMUK Replacement Ear Pads — biggest trade-off: it is a pad set only. No speakers, no mic, no cable — and it fits a specific short list of Jabra models, so you must confirm your model before buying.
• Turtle Beach Airlite Fit — biggest strength: a complete, officially Nintendo-licensed wired headset with 40mm dynamic drivers, a flip-to-mute mic, over-ear jersey knit cushions and on-ear volume control.
• Turtle Beach Airlite Fit — biggest trade-off: it is over-ear and built around the Switch family, so it is not a repair part for anything and it is not aimed at office headset refresh.
• Buy HAOMUK if your Jabra on-ear headset still works fine and only the cushions are worn out.
• Buy the Airlite Fit if you want one ready-to-go headset for Switch gaming with a mic and inline volume.
The HAOMUK set is a maintenance product, and that is the whole point. If your Jabra Evolve2 65, Evolve2 40 or Elite 45h still sounds right but the pads have flattened, cracked or started flaking, these cushions let you keep the headset you already know. The listing covers the 65MS, 65UC USB, 40UC, 40MS USB and Elite 45h variants, so it is aimed squarely at people who use those on-ear work headsets daily and want them back to a clean, tight fit.
Who should skip it? Anyone who does not own one of those Jabra models. Despite the "replacement ear pads" phrasing that gets searched generically, this is not a universal pad. It will not fit a Turtle Beach headset, and it will not fit random over-ear headphones. If you are unsure, check your model number first — the brand explicitly asks buyers to confirm before purchase. Installation is tool-free and takes a few simple steps: remove the old pads, line up the mounting points, seat the new pad on the ear cup, then press to secure it. HAOMUK also backs it with a one-year manufacturer warranty.
Turtle Beach Airlite Fit: Who It's For
The Airlite Fit is the opposite kind of purchase: a full headset you unbox and use. It is officially licensed by Nintendo for Nintendo Switch 2 and also works across Nintendo Switch, Switch Lite and the Switch OLED Model, which makes it a safe pick for a household with more than one Switch. It is wired over a 3.5mm jack with a 3.8ft / 1.15m cable, and it does not need charging — a genuine advantage if you are tired of juggling battery levels before a session.
The audio side is a 40mm dynamic driver with a 20Hz–20kHz frequency range and 35 ohm impedance, which is an easy load for a handheld or a controller jack. The mic is bi-directional and sound-isolating with flip-to-mute: flip it up and you are silent, flip it down and you talk. Volume sits on a wheel on the back of the left ear cup, so you are not digging through console menus mid-match.
Comfort is where the design leans hardest. The ear cushions are jersey knit over foam with an oval, over-ear shape, and the headset is built to be lightweight at 8 ounces with an adjustable headband. Turtle Beach positions the ergonomics around long sessions and reduced strain on your head, neck and ears. If you wear glasses or just dislike pressure on your ears, an over-ear knit pad is usually a friendlier long-haul choice than an on-ear one.
Side-by-Side: Which Should You Choose?
• Best for repairing a Jabra Evolve2 65 / 40 / Elite 45h → HAOMUK Replacement Ear Pads.
• Best for a complete, ready-to-play Switch headset → Turtle Beach Airlite Fit.
• Best for a microphone for voice chat → Turtle Beach Airlite Fit (bi-directional, flip-to-mute).
• Best for long-session comfort on a gaming setup → Turtle Beach Airlite Fit, with its over-ear jersey knit cushions and lightweight 8 oz build.
• Best for on-ear office use where the headset already works → HAOMUK, since it keeps your existing on-ear fit and brings the cushions back to a tight, clean state.
• Best for tool-free, few-step installation → HAOMUK — no soldering, no disassembly beyond swapping the pads.
• Best for no charging, no battery anxiety → Turtle Beach Airlite Fit, a wired 3.5mm headset.
• Best for cross-console flexibility in a Nintendo household → Turtle Beach Airlite Fit, licensed for Switch 2 and compatible with Switch, Switch Lite and Switch OLED.
In my opinion these are not really rivals, so my recommendation splits by situation. If your Jabra on-ear headset still works and only the cushions have given up, I would buy the HAOMUK Replacement Ear Pads — it is the cheaper way to keep a headset you already like, and the memory foam and protein leather spec is exactly what you want in a refresh. If you want a whole headset for Switch gaming, I would buy the Turtle Beach Airlite Fit, because it is licensed for the platform, wired so it never needs charging, and built over-ear for long sessions. Match the product to the job, not to the search term.
FAQ
what is on ear headset
An on-ear headset rests against the outside of your ear rather than surrounding it, so the pad presses lightly on the ear itself. The Jabra Evolve2 65, 40 and Elite 45h that HAOMUK makes pads for are on-ear designs, which is why the pad material and thickness matter so much for comfort.
An over-ear headset has larger cushions that fully enclose the ear, which generally improves isolation and reduces pressure on the ear. The Turtle Beach Airlite Fit is an over-ear model with oval jersey knit cushions over foam, and Turtle Beach notes that this style boosts comfort, bass and noise isolation.
how to wear one ear headset
A single-ear or on-ear headset is worn with the pad sitting on the ear and the headband over the top of your head for stability. On a model like the Evolve2 65, the pad is what holds that position, so if the cushion is worn out the headset slips — which is the exact problem HAOMUK pads are meant to solve.
how to open headset ear
"Opening" a headset ear cup usually means removing the old ear pad. With the HAOMUK set you simply pull the worn pad off, align the mounting points on the ear cup and the new pad, seat it, then press to secure it — no tools required. If you mean opening the shell of a headset, that is a different job and not something these pads require.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: eKids Barbie vs Turtle Beach Airlite Fit: Gaming Headset, Turtle Beach Airlite Fit vs URBAN SWING W4-LITE: Wired Over, Niukeke Replacement Ear Pads vs HAOMUK Replacement Ear Pads