How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-24 · 6 min read · Independent comparison
These two listings sit in the same search results for one reason only: both are small, cheap air fryer spare parts. That's where the similarity ends. One is a set of silicone bumpers that touches your food drawer. The other is an electrical micro switch that lives inside the housing. Picking the wrong one won't just waste your time — it can leave you with a part that physically cannot do the job.
• GSZN Air Fryer Silicone — biggest strength: food-grade, BPA-free silicone rated to 430°F/221°C, so it survives normal air frying temperatures while cushioning the tray and protecting the coating.
• GSZN Air Fryer Silicone — biggest trade-off: it only fits the 6.8QT COSORI Dual Blaze tray. On any other brand or size, it's the wrong part.
• Tijicld KW7-0 — biggest strength: a 16A 125V/250V normally-open micro switch in flame-retardant PBT plastic, built for the door-safety and interlock circuits inside air fryers, microwaves and induction cookers.
• Tijicld KW7-0 — biggest trade-off: installing it means opening the appliance and working around mains wiring. It's a repair part, not a drop-in accessory, and it only suits appliances that already use a KW7-0 type 2-pin switch.
• Who each pick is for: GSZN for COSORI Dual Blaze 6.8QT owners doing maintenance; Tijicld for anyone troubleshooting a unit that won't power on or latch correctly.
The GSZN set is four silicone rubber feet — bumpers, tabs, stoppers, call them what you like — that sit on the air fryer tray of a 6.8QT COSORI Dual Blaze. The material is the whole story here. It's food-grade silicone that's BPA-free, non-toxic and tasteless, which matters because these pieces live inside the cooking cavity, not on a shelf. They're also described as non-slip, scratch-resistant and tough enough not to tear easily, and they hold up to 430°F/221°C.
That temperature figure is the one I'd focus on. Most air frying happens well below 430°F, so the bumpers have real headroom rather than sitting right at their limit. The practical payoff is twofold: the tray stops sliding and rattling against the basket, and the non-stick coating on the inside of the fryer gets a soft buffer instead of metal-on-metal contact.
Installation is about as simple as it gets. You press the bumpers onto the tray, and they come off just as easily when you want to rinse them. There's no wiring, no tools, no disassembly.
Who should buy it: owners of a 6.8QT COSORI Dual Blaze whose tray has started to shift, scratch or rattle, and anyone who wants a spare set of bumpers on hand before the originals wear out.
One small note: the listing mentions a 1–3mm measurement deviation, which is normal for soft silicone parts and not something to worry about.
Tijicld KW7-0: Who It's For
The Tijicld KW7-0 is a different animal entirely. This is a two-pack of KW7-0 micro switches, normally open, rated 16A at 250VAC or 125VAC with two pins. In plain terms, it's the small click-switch that tells an appliance a door is shut or a drawer is seated — the kind of safety interlock that stops a microwave or air fryer from running when it shouldn't.
The compatibility list is broad: Power XL, Crux, COSORI and other air fryer and microwave models that use the KW7-0 type 2-pin switch. The listing also flags induction cookers. That range is the appeal — if you've diagnosed a failed interlock, there's a decent chance this is the exact part.
The 16A rating is worth pausing on. That's a serious current capacity for a switch this small, and it's what lets it handle the load inside a high-demand appliance rather than failing early under heat and current. The body is high-temperature-resistant, flame-retardant PBT plastic, chosen for exactly the environment it lives in. You get two switches, which is handy — one to fit, one spare, or both if your appliance uses a pair.
Who should buy it: anyone repairing an air fryer, microwave or induction cooker that won't start because a door or interlock switch has failed, and who has confirmed the appliance uses a KW7-0 type 2-pin normally-open switch.
Who should skip it: anyone who isn't comfortable opening an appliance and working near mains voltage. If you're not sure whether your unit uses this switch, don't guess — a mismatched switch is worse than no switch. And if your problem is a rattling tray or a scratched coating, this part does nothing for you.
Side-by-Side: Which Should You Choose?
• Best for tray protection and rattle reduction → GSZN Air Fryer Silicone. Soft silicone bumpers are the point.
• Best for exact-fit confidence → GSZN Air Fryer Silicone, but only if you own the 6.8QT COSORI Dual Blaze. Otherwise, neither part is a fit.
• Best for wide appliance compatibility → Tijicld KW7-0. Power XL, Crux, COSORI, microwave ovens and induction cookers.
• Best for a no-tools, five-minute job → GSZN Air Fryer Silicone. Press on, rinse off. No wiring involved.
• Best for heat and electrical durability → Tijicld KW7-0. 16A rating and flame-retardant PBT construction.
• Best for a spare-parts drawer → both. GSZN gives you four bumpers; Tijicld gives you two switches.
• Best for beginners → GSZN Air Fryer Silicone. The Tijicld part is for people who already know their way around an appliance.
For most people reading this, I'd point to the GSZN Air Fryer Silicone. It's the lower-risk purchase: no wiring, no diagnosis, and it solves a problem — a shifting, scratching tray — that COSORI Dual Blaze 6.8QT owners actually run into. If, however, your air fryer is dead and you've traced it to a failed interlock switch, the Tijicld KW7-0 is the right call, and the two-pack gives you a spare. In my opinion, buy the one that matches your problem, not the one that looks cheaper.
Yes. It's described as food-grade silicone that is BPA-free, non-toxic and tasteless, and it's rated to 430°F/221°C — above typical air frying temperatures.
Only if your appliance uses a KW7-0 type 2-pin normally-open micro switch. The listing names Power XL, Crux, COSORI and other air fryer and microwave models, plus induction cookers, but you should confirm the switch type before ordering.
They solve completely different problems, so value depends on your fault. GSZN gives you four silicone bumpers for tray protection; Tijicld gives you two switches for an electrical repair. Check the current price on Amazon and match it to the job you actually need done.
Only in the sense that they're unrelated parts. The bumpers go on the tray of a 6.8QT COSORI Dual Blaze; the switch goes inside the appliance's electrical circuit. One is maintenance, the other is repair.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: HOMELYLIFE 9-Inch vs Alfolive 2025: Air Fryer Ratings, Foopama Silicone Air Fryer vs Fryerly Silicone Air Fryer, SAWNZC 24Pack vs Generic Silicone Air Fryer: Air Fryer