How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-29 · 7 min read · Independent comparison
• GEEKRIA's strength: a genuine over-ear pad set — memory foam wrapped in protein leather, sold as two cushions with a video guide, sized for the Beats Solo Wireless (Solo Bluetooth) ear cup.
• GEEKRIA's trade-off: it is a one-headphone part. It fits Solo Wireless (810-00012-00 / 810-00012-01) only, and Geekria explicitly says it does not fit Studio Wireless or Solo 2.0 Wireless.
• Mijusun's strength: memory foam tips with internal threads that grip a 5.0mm–7.0mm nozzle like a screw instead of sliding on, plus three pairs in three sizes and a storage box.
• Mijusun's trade-off: it is an in-ear tip, not a headphone pad, and it only works on earbuds that fall inside that 5.0–7.0mm nozzle range.
• Buy GEEKRIA if your Beats Solo Wireless pads are flaking, flat or cracking and you want the headphone back to normal.
• Buy Mijusun if your earbuds keep working loose mid-run or let in too much street noise.
This is a repair part, and it behaves like one. Geekria builds the cushions from memory foam covered in protein leather, in black, with each pad measuring roughly 2.76 x 2.76 x 0.39 inches. That footprint tells you what it is: a flat, round on-ear cushion for a compact headphone, not a deep over-ear cup. The set is two cushions — that's the whole package. Your headphone, cable and headband are not included, and you are not meant to replace them.
The detail I'd pay attention to before ordering is compatibility. Geekria names the Beats Solo Wireless (Solo Bluetooth) model numbers 810-00012-00 and 810-00012-01, and then draws a hard line: do not fit Studio Wireless, do not fit Solo 2.0 Wireless. Those two exclusions matter, because Solo and Studio pads look similar in photos and buyers confuse them constantly. If your headphone doesn't carry one of those Solo Wireless numbers, this isn't your part.
Installation is mechanical. Geekria instructs you to line up the arrow on the attachment clip with the top section of the ear cup before pressing the pad on, and says that alignment is what lets it snap in securely. That's a useful warning — misaligned clips are the usual reason a replacement pad feels loose. Geekria also backs the pads with a one-year manufacturer warranty and a "SureFit" note telling buyers to contact them if they matched the wrong headphone type.
Buy it if: you own Beats Solo Wireless (either model number above), the originals are worn through, and you want fresh memory foam and protein leather in black without hunting for a new headphone. Skip it if: you own Studio Wireless, Solo 2.0 Wireless, or any other model — the fit simply isn't there. Also skip it if you were hoping for a multi-size kit; you get one size, two pieces.
This is the opposite kind of product: not a repair for one headphone, but a universal upgrade for a whole drawer of earbuds. Mijusun makes memory foam tips for nozzles between 5.0mm and 7.0mm, and the feature that separates them from ordinary foam tips is the internal threading. Standard smooth-bore tips slide over the nozzle and rely on friction alone — Mijusun's own explanation is that smooth bores loosen over time, rotate, and eventually fall off. Their threaded bore grips the nozzle the way a screw grips its hole.
In practice that's a sports feature. If you run, lift or commute on a bike, tips that back out of your ear canal are the difference between a workout and a scavenger hunt. The memory foam is also designed to conform to the canal for a pressure-free seal rather than pressing outward like silicone, which is why Mijusun frames them as comfortable enough for all-day listening and free of the ear fatigue stiffer tips cause.
The seal does double duty: it isolates ambient noise, which in turn means richer bass and clearer detail without pushing the volume up. That's just how in-ear physics works — a proper seal is most of your low end. You get three pairs in three sizes, plus a storage box, so you can find your size, keep a spare in a bag, and replace one when it inevitably wears out. Mijusun covers them with a one-year warranty, and the set weighs about 22.68g in total.
Buy it if: you have wired or wireless earbuds with nozzles in the 5.0–7.0mm window, you move around while listening, and you want foam comfort plus a tighter seal. Skip it if: your earbuds have nozzles outside that range, or you're trying to fix a pair of Beats Solo Wireless — this is an in-ear tip and cannot help an on-ear headphone.
Side-by-Side: Which Should You Choose?
• Best for reviving Beats Solo Wireless → GEEKRIA Replacement Ear Pads. The compatibility list names your headphone; nothing else here does.
• Best for a worn-out, flaking pad → GEEKRIA. Protein leather over memory foam is the same material recipe as a stock pad, in black.
• Best for noisy buses, trains and open offices → Mijusun. The foam seal blocks ambient noise and keeps your volume lower.
• Best for long listening sessions → Mijusun, in my opinion. Foam that conforms to the canal instead of pressing on it is the more forgiving option over hours.
• Best if you own several pairs of earbuds → Mijusun. Three pairs in three sizes covers more than one set of buds; GEEKRIA covers exactly one headphone.
• Best if you want a guided install → GEEKRIA. The video guide and the clip-alignment instruction take most of the guesswork out of the swap.
• Worst-case mix-up → pairing either one with the wrong hardware. GEEKRIA won't fit Studio Wireless or Solo 2.0 Wireless; Mijusun won't fit nozzles outside 5.0–7.0mm.
In my opinion these aren't really competitors — they solve different problems, and the right answer depends entirely on what's broken in your drawer. If you own Beats Solo Wireless and the pads are shot, I'd buy the GEEKRIA set: it's the specific, compatible part, it comes as a matched pair, and the clip alignment guidance plus the one-year warranty make it the lower-risk repair. If instead your earbuds keep slipping, or the world is too loud through them, I'd buy the Mijusun tips — the threaded grip and the three-size kit give you more chances to get a real seal. Buy for the hardware you actually own, not the other way around.
FAQ
Only if the nozzle measures between 5.0mm and 7.0mm. That range is the stated fit window, and it covers most common wired and wireless earbuds. Measure before ordering if you're unsure, because tips outside that range won't seat properly even with the threaded grip.
I can't quote prices here — check the current price on Amazon using the button on this page. Value-wise, both are cheap ways to avoid replacing hardware: GEEKRIA restores a headphone you already like, and Mijusun gives you three pairs of tips plus a storage box for one set of earbuds.
Both use memory foam, and both carry a one-year warranty — GEEKRIA's from the manufacturer, Mijusun's stated as one year. The realistic lifespan difference is in the parts: GEEKRIA's protein leather surface is what wears and flakes over time, while foam tips compress and lose their spring with heavy daily use and sweat.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Creative Zen Hybrid Gen vs Nothing Ear Noise Cancelling, LORELEI QC30 vs TOZO NC3: Hybrid ANC Earbuds, MZYDM Bone Conduction Headphones vs MARLALL Swimming Headphones-Bone C, ai translation earbuds real time