How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a replacement pair that is built specifically around Sony's MDR-1A and MDR-1ADAC platform and comes with a one-year manufacturer warranty, choose GEEKRIA Replacement Ear Pads; if you need fresh cushions for a Jabra Evolve2 30 office headset and want a fitting tool in the box, choose Generic Replacement Ear Pads.
• GEEKRIA — biggest strength: memory foam plus protein leather in a pair of two, sized for the Sony MDR-1A / MDR-1ADAC, with a one-year manufacturer warranty and a video guide for the swap.
• GEEKRIA — biggest trade-off: it is a model-specific pad. If you own anything other than those two Sony headphones, it is not for you.
• Generic — biggest strength: it is built for the Jabra Evolve2 30 family and ships with a plastic removal tool so you can do the job in minutes without hunting for anything.
• Generic — biggest trade-off: you get one pad set (unit count of 1) for a single headphone model, and the listing is blunt that it will not fit the Evolve 30.
• Pick GEEKRIA if your Sony MDR-1A cushions have gone flat and you want a like-for-like replacement from a brand that does this as its main line.
• Pick Generic if you are reviving a Jabra Evolve2 30 work headset and want the least fussy, tool-included path.
GEEKRIA builds these pads around one job: putting the Sony MDR-1A and MDR-1ADAC back to feeling like they should. The materials are the honest, sensible choice for that job — memory foam that compresses and recovers, wrapped in protein leather. That combination is what gives you the soft, slightly grippy seal that closed-back Sony headphones rely on to keep bass from leaking away. The pads are black, they come as a pair, and the dimensions (roughly 3.94 x 3.23 x 0.59 inches) put them in the right size class for over-ear Sony cups rather than some universal one-size blob.
The part I actually like here is the support structure around the product. There is a video guide for the replacement, so you are not guessing at how the old pad peels off. There is a one-year manufacturer warranty. And the brand's "SureFit" messaging is refreshingly honest about the most common failure in this category — ordering the wrong size. If you match the wrong model, they tell you to contact them rather than leaving you stuck with pads that don't fit. For a low-cost repair part, that is more reassurance than most sellers bother to offer.
Who should buy it: Sony MDR-1A and MDR-1ADAC owners whose original cushions have flattened, cracked, or started flaking, and who want the headphone to look and feel renewed rather than replaced. Who should skip it: anyone with a different headphone. This is not a universal pad, and the listing says so plainly. Two pads, one model family, done.
This one is aimed squarely at the office headset crowd. It is made for the Jabra Evolve2 30 — the wired stereo noise-isolating work headset — including the 30MS, 30UC and 30SE variants. Crucially, the listing warns in the title that it does not fit the older Evolve 30. That single line tells you the seller knows exactly where people get confused, and it's worth reading twice before you buy. The pads themselves use high-density slow-rebound memory foam under soft protein leather, which is the spec you want in a headset you wear for hours of calls: the foam gives slowly instead of pressing back hard, so pressure builds up less over a long shift.
The included plastic removal tool is the detail that makes this a genuinely practical buy. Replacing pads on small on-ear and over-ear headsets usually means prying at a plastic lip with your fingernails and hoping nothing snaps. Having a proper tool in the box turns a fiddly ten-minute job into a couple of minutes. The seller also states they specialise in replacement pads and will reply to questions within 24 hours, and there's a one-year manufacturer warranty on top.
Who should buy it: anyone running an Evolve2 30 for work whose pads are worn, shiny, or no longer sealing properly, and who wants the swap done quickly. Who should skip it: Evolve 30 owners (it won't fit), and anyone with a different brand or model of headset. The unit count is 1, so you are getting one set of cushions — check that matches what you need before ordering.
• Best for Sony MDR-1A / MDR-1ADAC owners → GEEKRIA. It is the only one of the two designed for that platform.
• Best for Jabra Evolve2 30 work headsets → Generic. Model-specific fit for the 30, 30MS, 30UC and 30SE.
• Best if you want a fitting tool included → Generic. The plastic removal tool is in the box; GEEKRIA instead gives you a video guide.
• Best if you want a pair plus brand-level support → GEEKRIA. Two cushions, a one-year manufacturer warranty, and a stated policy for wrong-model mistakes.
• Best for long-call comfort → Generic. High-density slow-rebound foam is the spec that matters when you wear a headset all day.
• Best for a quick, low-risk repair → either, as long as the model matches. Both are black, both use memory foam with a leather-facing cover, and both are simple swaps.
• Biggest risk to avoid → ordering the wrong model. GEEKRIA fits Sony MDR-1A / MDR-1ADAC only; Generic fits the Evolve2 30 family only and explicitly not the Evolve 30.
• If price matters most → check the current price on Amazon for both before deciding; the numbers move and neither listing here shows one.
In my opinion, the right pick comes down entirely to which headphone is sitting on your desk, not which pad is "better." If you own a Sony MDR-1A or MDR-1ADAC, I would buy the GEEKRIA pads — the video guide, the one-year manufacturer warranty, and the brand's willingness to fix a mismatched order make it the lower-risk choice for that headphone. If you own a Jabra Evolve2 30, I would buy the Generic set, mostly because the included removal tool makes the swap painless and the slow-rebound foam suits all-day call wear. Neither is a universal pad, so match the model first and the rest is easy.
FAQ
Not in the abstract — they fit different headphones. GEEKRIA is made for the Sony MDR-1A and MDR-1ADAC; Generic is made for the Jabra Evolve2 30 family. Buying the wrong one is the only real way to lose here.
No. The listing states clearly that they do not fit the Evolve 30. They are designed for the Evolve2 30, including the 30MS, 30UC and 30SE versions. Confirm your exact model before ordering.
The Generic set includes a plastic removal tool, so no. The GEEKRIA set instead provides a video guide to walk you through the replacement, and the job on those Sony cups is a straightforward peel-and-fit.
Match your headphone model to the compatibility list first, since that's what decides whether either pad works. Then check the current price on Amazon — the page has a button for each product so you can confirm it yourself.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.