Ftp Download Speedtest

What can I do if I'm not getting the speed I pay for? If results from FAST.com and other internet speed tests (like dslreports.com or speedtest.net) often show less speed than you have paid for, you can ask your ISP about the results.

Hi, since a couple of days my speedtest thing based on the network binding addon keeps being offline. It worked very well in the last 2 months. I was wondering if this has to do with the address i am using. If i download the speedtest file from the browser, this still works.

Download Zip 🔥 https://bytlly.com/2y5Uom 🔥

you can check the available serverlist via speedtest-cli command

speedtest-cli --list displays a list of speedtest.net servers sorted by distance

and / or of course:

speedtest-cli --list | grep -i germany the currently accessible german servers

Hey there, do you see any problems when you run speedtest manually from the command line as the netdata user? (This needs to be done once manually to accept the license agreements. You probably know this from the blog already.)

So if you are on an unlimited connection on a raspberry pi and are OK to have speedtest download and upload a bunch of data then setting the speedtest_update_every variable in the speedtest.conf file to a smaller value should do the trick.

When I go to speedtest.net, it hangs while trying to determine the optimal server. Otherwise, internet access seems to behave as expected. I feel like there's some configuration piece I'm missing here.

test on my phone using speedtest app getting 40-50 Mbs only which is hardly any better than the lynksys system I replaced. The brand new Roku Premier devises are also only showing 40-50 Mbs, our Samsung phones show 50-70 Mbs

using the speedtest in the Orbi app I installed during the setup process while in the exact same locations as the above tests getting 206-211 Mbs results - seems very strange that all others show much much slower speeds

Upon setting it up, resetting cable modem, etc., the speedtest wired and wireless were running 80mbps when the previous 2 set combo was working at 180mbps. I wired up directly to the cable modem and it was 180mbps. I then checked the speedtest under the ADVANCED tab: SETUP --> QoS Setup which is basically just a glorified speedtest. This test also got 180mbps. So I knew something had to be happening during the router distribution aspect.

Regardless if YOU are having speed issues and know it is not your cable modem and the router firmware speedtest in the regular QoS setup is posting normal speeds, please go to the "special" QoS settings and disable WMM.

I'd agree the speedtest option should be pulled. I've ran mulitple routers and only seen 1 company consistently have an integrated speedtest because they hosted their own servers for speedtesting. (or thats the impression they gave during testing).

Haha, I was "playing" with these settings early during the pandemic because I was getting complaints from others that my network was slow for internet meetings. But I had gigabit..how can it be slow? I tried ALL kinds of settings, but nothing really worked, except turning off all\any monitoring\logging\qos stuff. Then speeds were back up....from Rogers and speedtest sites.

re speedtest app

I was using that as well. The thing is Rogers (ISP) own site was showing slow speeds, different from speedtest app and different again from the website...confusion abound. But that was when I was using the routers monitoring\logging\qos options. I never realized just how much they sap bandwidth. :

I am trying to convert a program to an exe using pyinstaller. The program performs a hardware assessment of a user's computer to include running an internet speed test utilizing speedtest-cli. The program runs fine until I compile it at which point I receive the following error:

I have a MX84 which we have just had our leased line upgraded to symmetrical 500MB, speedtest we're getting 250MB, so i got the ISP to come on site to run tests, connecting his laptop direct into the circuit. After a while they removed restrictions and had to boost the line to get the 500MB speed. We then reconnected the MX and did a speed test which still is 250MB speed.

You can use the original speedtest CLI utility from ookla. The one shipped with nethserver is an opensource one (there was some discussion about using or not using the one from ookla due to its license).

Some interloper wrote to this thread who was suspended for SPAM, but since they raised an issue claiming the CLI speedtest uses one server, and the portal uses more than one, I can report the following:

I just reinstalled speedtest-cli on my router. It was about 10.5 MB. Make sure you have enough space before installing. You could probably delete most of the pip dependencies after installing speedtest. Ill try out which packages when I have some time. Now my speeds match my desktop but ping is definitely higher on the router, 4-5 ms on PC and 11-12 ms on OpenWRT.

The Python Speedtest is very different from the Ookla speedtest, and in my experience gives poor and erroneous results. I have a Raspberry Pi 4B I am using with OpenWRT. Before I installed OpenWRT on it, I ran up Raspian and installed the Python Speedtest. It only gave me around 80Mb/s even though my Virgin Media UK service was capable of 360Mb/s. I then downloaded the compiled Speedtest binary from Ookla and even when specifying the same server as the Python version, the results were much different - I got around 350-360Mb/s on every pass.

I'm encountering a strange problem here.On my local homeserver(Debian 9.9), speedtest-cli and it's python pendant are freaking slow.Since I use it to monitor my ISP connection stability, this is a problem.

I was messing with this - and have speedtest-cli and speedtest++ installed. (Unfortunately, my GUI PCs are behind a homeplug connection, but trust me when I say the rest). Its probably down to the protocol that's being used.

speedtest-cli is completely broken, reports wildly innacurate results, and the developer 'sivel' on GitHub has resolutely refused to address any of the dozens of issues filed on GitHub about this issue, immediately closing and locking these issues without comment.

I had an issue with Glasswire, so I had to uninstall and cleanly reinstall. Wanting to find out how much data a test at speedtest.net used, I went to their page, cleared my data in Glasswire, and ran the test. The following was the result, and it shows that a single test used 76MB. ONE TEST! If only the problem with testmy.net was no longer a problem.

I was testing out speedtest.net and probably flew through 3GB yesterday on our Gen5 I did figure out that when testing 2 different devices I was getting drastically different speeds. Upon checking the server, the devices were picking 2 different servers and when placed on the same ones, produced parallel results. Just something to look out for.

I don't know what to believe other than throughput meter and speedtest.net is reporting higher speed. My throughput meter verifies the higher speed. Does seem for me at least on Gen 4 that TMN reports lower than what is actually available speed wise.

Also, I have noticed that speedtest (I use the app -- the site doesn't work for me) is more accurate the higher the speeds. When my system is going at 47 Mbps, speedtest matches that. When my system is going at 4 Mbps, speedtest gives me ridiculously high speeds.

Yeah, I was wondering about that. I think I'll stick with testmy. It's been reliable for years. However, I did do a test on speedtest last night and then did one on testmy and they were the same. But if speedtest uses 3x the data, I'm staying with testmy. Also, speedtest doesn't always connect and when it does, it still takes longer.

The Tele2 Speedtest Service helps you test your Internet connection speed through various methods and is available not only to customers of Tele2 but anyone with an Internet connection. Test your connection using speedtest.net's tool, downloading a file via your web browser (HTTP) or downloading and uploading via FTP.

speedtest.net is an easy to use web-based (Flash) test to test both upload and download speeds as well as latency to any of a long list of servers around the world. Tele2 Speedtest servers runs a speedtest.net server. Go to speedtest.net to test your connection. This server (xxx-SPEEDTEST-1) will automatically be picked for you. After the test you can choose a another server and location to perform further testing.

This page and the listed speedtest services are hosted on a number of servers spread through Europe (see locations). Each location consists of a 1U Supermicro server with an octacore Xeon E3-1240 V2 running at 3.4GHz, 32GB of RAM and an Intel 10GE NIC (82579LM chip). Debian Linux is the operating system used, nginx for serving web pages and sparse files via HTTP and vsftpd is used for FTP. A small script called cleandir is used to clean the upload directory of the FTP server to avoid filling the file system with temporary uploaded files.

Anycasting is a technique where a single IP address is used in multiple locations in a network and packets are sent to the closest server. Tele2 speedtest service utilizes this to send you to the closest location in our network. Do note how "closest" is not measured geographically but rather by what our networks thinks is the closest location. Our primary network metric is latency and therefore the closest network distance is typically the closest node geographically but there are situations where ineffecient fiber routing or cuts could lead to you being served by a node further away. In addition to simply serving users using the closest server, anycast also enables basic load balancing and redundancy as users in different areas are served by their closest server, spreading the load over all of our installations. If a server should fail, users would be served by the second closest server. 17dc91bb1f